UCUF-965 是一种 CXCR4 正向变构调节剂,可增强 CXCL12 介导的 β-抑制蛋白招募和 cAMP 信号通路,激活淋巴母细胞迁移并诱导钙内流,且不结合 CXCR4 的正构 CXCL12 结合位点,同时可降低成纤维细胞中 miR-15b 和 miR-29a 的水平、提高 miR-146a 的水平,增强糖尿病小鼠的血管生成并缩短伤口愈合时间,因此可用于糖尿病伤口愈合障碍的研究。
产品编号: MS-Z77448 CAS No.: 2965316-77-0 分子式: C22H23N5Os 分子量: 405.52
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

UCUF-965 是一种 CXCR4 正向变构调节剂,可增强 CXCL12 介导的 β-抑制蛋白招募和 cAMP 信号通路,激活淋巴母细胞迁移并诱导钙内流,且不结合 CXCR4 的正构 CXCL12 结合位点,同时可降低成纤维细胞中 miR-15b 和 miR-29a 的水平、提高 miR-146a 的水平,增强糖尿病小鼠的血管生成并缩短伤口愈合时间,因此可用于糖尿病伤口愈合障碍的研究。

生物实验数据

生物活性 UCUF-965 is a positive allosteric modulator of CXCR4 that enhances CXCL12-mediated β-arrestin recruitment and cAMP signaling, activates lymphoblast migration, and induces calcium influx without binding to the orthosteric CXCL12 binding site of CXCR4; it also decreases miR-15b and miR-29a levels and increases miR-146a levels in fibroblasts, enhances angiogenesis and shortens wound healing time in diabetic mice, and can therefore be used for research on impaired diabetic wound healing.
IC50 & Target

CXCR4

 

体外研究
(In Vitro)

UCUF-965 (0.1-10 μM) 可促进 β- 抑制蛋白募集,其 EC50 为 0.02 μM。
UCUF-965 是 CXCR4 过表达 CHO 细胞中 CXCR4 介导的 cAMP 抑制的部分激动剂,其 EC50 为 0.05 μM。
UCUF-965 (3 h) 可通过激活 CXCR4 诱导人淋巴母细胞系 CEM-CCRF 发生迁移,其 EC50 为 0.4 μM。
UCUF-965 (10 μM) 可在人淋巴母细胞系 CEM-CCRF 中诱导由 CXCR4 介导的钙内流。
UCUF-965 (0.1-10 μM; 24 h) 可调节小鼠糖尿病及非糖尿病成纤维细胞中与伤口愈合相关的微小 RNA 表达,降低 miR-15b 和 miR-29a 的水平,并升高 miR-146a 的水平。

Cell Migration Assay

Cell Line: CEM-CCRF human lymphoblast cells
Concentration: 0.4 μM
Incubation Time: 3 h
Result: Induced CEM-CCRF cell migration with an EC50 of 0.4 μM and an average Eₘₐₓ of 31%.

Real Time qPCR

Cell Line: murine diabetic (Db/Db) fibroblasts; murine non-diabetic (HZ) fibroblasts
Concentration: 0.1, 1, 10 μM
Incubation Time: 24 h
Result: Decreased the expression of miR-15b in both diabetic and non-diabetic fibroblasts in a dose-dependent manner.
Decreased miR-29a levels and increased miR-146a levels in both cell types, with responses observed at concentrations as low as 0.1 μM.
体内研究
(In Vivo)

UCUF-965 (10 μM;皮内注射;单次给药) 可使糖尿病小鼠的伤口愈合时间缩短 36%,并增强其血管生成。

Animal Model: Db/Db mice (10-week-old female, diabetic model)
Dosage: 10 μM
Administration: intradermal injection; single dose (immediately after wounding)
Result: Reduced wound surface area compared to controls starting at post-injury day 6.
Achieved full wound closure at day 14, representing a 36% reduction in wound healing time compared to day 22 in PBS-treated controls.
Showed a significant increase in CD31-positive endothelial cells at day 7 post-wounding, reaching levels similar to non-diabetic control wounds.

化学信息

分子量 405.52
分子式 C22H23N5Os
CAS No. 2965316-77-0

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础