PD-1/PD-L1-IN-63

PD-1/PD-L1-IN-63 是一种具有口服活性的 PD-1/PD-L1 抑制剂(IC50 为 9.1 nM),可通过阻断 PD-1/PD-L1 相互作用诱导癌细胞死亡并抑制肿瘤生长,可用于黑色素瘤的研究。
产品编号: MS-Z72208 纯度: 98.03% CAS No.: 2691796-92-4 分子式: C37H41Cl3N4O3 分子量: 696.11
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

PD-1/PD-L1-IN-63 是一种具有口服活性的 PD-1/PD-L1 抑制剂(IC50 为 9.1 nM),可通过阻断 PD-1/PD-L1 相互作用诱导癌细胞死亡并抑制肿瘤生长,可用于黑色素瘤的研究。

生物实验数据

生物活性 PD-1/PD-L1-IN-63 is an orally active PD-1/PD-L1 inhibitor with an IC50 of 9.1 nM that blocks the PD-1/PD-L1 interaction, induces cancer cell death and inhibits tumor growth, and can be used for melanoma research.
体外研究
(In Vitro)

PD-1/PD-L1-IN-63 (compound P18) 可强效抑制 PD-1/PD-L1 蛋白相互作用,在 HTRF 结合实验中的 IC50 为 9.1 nM。
PD-1/PD-L1-IN-63 可结合纯化的人源 PD-L1 (KD = 88.3 nM) 和鼠源 PD-L1 (KD = 174 nM) 蛋白。
PD-1/PD-L1-IN-63 (0.05-5 μM) 可剂量依赖性结合纯化的人源 PD-L1 (KD = 202 nM) 和鼠源 PD-L1 (KD = 471 nM) 蛋白,该结果由 SPR 检测得出。
PD-1/PD-L1-IN-63 (37-1000 nM; 48 h) 在 HepG2/hPD-L1 与 Jurkat/hPD-1 共培养细胞模型中以剂量依赖方式促进 HepG2 细胞死亡,在 1000 nM 浓度下可使 HepG2 细胞死亡率提升 58.2%。
PD-1/PD-L1-IN-63 (48 h) 可在体外抑制 MCF-7、H1299、HeLa、HepG2 和 Jurkat 细胞的增殖,其 IC50 值范围为 2.3 μM 至 4.1 μM。

Cell Cytotoxicity Assay

Cell Line: HepG2/hPD-L1, Jurkat/hPD-1
Concentration: 37, 111, 333, 1000 nM
Incubation Time: 48 h
Result: Promoted HepG2 cell death in a dose-dependent manner.
At 1000 nM, elevated the mortality rate of HepG2 cells by 58.2%, which was significantly higher than the positive control BMS-202.

Cell Viability Assay

Cell Line: MCF-7, H1299, HeLa, HepG2, Jurkat
Concentration: /
Incubation Time: 48 h
Result: Had IC50 values of MCF-7 (3.2 μM), H1299 (3.7 μM), HeLa (4.1 μM), HepG2 (2.3 μM), Jurkat (2.8 μM).
体内研究
(In Vivo)

PD-1/PD-L1-IN-63 (50-100 mg/kg; 灌胃; 14 天) 在接种 B16-F10 黑色素瘤的人源化 PD-1 C57BL/6J 小鼠中展现出强效的剂量依赖性抗肿瘤活性。
PD-1/PD-L1-IN-63 (50-100 mg/kg; 灌胃; 14 天) 在健康 BALB/c 小鼠中以 50 或 100 mg/kg 的剂量每日灌胃给药 14 天时,不会引发心脏毒性或骨髓抑制。

Animal Model: C57BL/6J-Pdcdem1(hPDCD1)/Smoc (n=5 per group)
Dosage: 50 mg/kg; 100 mg/kg
Administration: i.g.; daily; 14 days
Result: Reduced tumor weight by 69.7% and tumor volume by 89.6% at 50 mg/kg compared to vehicle control.
Reduced tumor weight by 78.1% and tumor volume by 94.1% at 100 mg/kg compared to vehicle control.
Did not cause significant changes in body weight, spleen weight, or thymus weight compared to vehicle control.
Significantly increased tumor mRNA expression of CXCR3, CXCL9, and CXCL10 in the 100 mg/kg group.
Significantly reduced PD-L1 mRNA expression in both treatment groups.
Significantly increased tumor-infiltrating CD3+CD4+ and CD3+CD8+ T cell percentages in a dose-dependent manner in tumor tissue (but not spleen).
Significantly reduced tumor PD-L1 protein expression in both treatment groups.
Showed no morphological aberrations in liver and kidney via H&E staining compared to vehicle control.
Showed no significant differences in serum liver and kidney function markers compared to vehicle control.
性状 粉末
颜色 White to off-white

化学信息

分子量 696.11
分子式 C37H41Cl3N4O3
CAS No. 2691796-92-4

储存&溶解度

储存方式

4°C, stored under nitrogen, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (stored under nitrogen, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础