m-Carboxycinnamic acid bishydroxamide

m-Carboxycinnamic acid bishydroxamide (CBHA) 是一种组蛋白去乙酰化酶 (HDAC) 抑制剂,可通过调控组蛋白乙酰化位点、改变 DNA 甲基化和表观遗传状态来提升整体组蛋白乙酰化水平,从而缓解转录抑制并促进染色质重塑,因此可用于克隆胚胎发育及表观遗传调控相关研究。
产品编号: MS-Z71817 纯度: 98.0% CAS No.: 174664-65-4 分子式: C10H10N2O4 分子量: 222.20
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5mg
询价
3-5 天
10mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

m-Carboxycinnamic acid bishydroxamide (CBHA) 是一种组蛋白去乙酰化酶 (HDAC) 抑制剂,可通过调控组蛋白乙酰化位点、改变 DNA 甲基化和表观遗传状态来提升整体组蛋白乙酰化水平,从而缓解转录抑制并促进染色质重塑,因此可用于克隆胚胎发育及表观遗传调控相关研究。

生物实验数据

生物活性 m-Carboxycinnamic acid bishydroxamide (CBHA) is a histone deacetylase (HDAC) inhibitor that modulates histone acetylation sites, alters DNA methylation and epigenetic states, and elevates global histone acetylation levels, thereby alleviating transcriptional repression and promoting chromatin remodeling, and is therefore applicable to research on cloned embryo development and epigenetic regulation.
体外研究
(In Vitro)

m-Carboxycinnamic acid bishydroxamide (20 μM; 6 小时) 处理重构雄核胚胎可提高囊胚形成率,支持获得具有正常核型、多能性标志物表达的 Ca2+ES 细胞系,且相对于合子来源的 R1 ES 细胞,其印记基因表达及 DNA 甲基化模式发生改变。
m-Carboxycinnamic acid bishydroxamide (5-50 μM;10 小时) 处理人工克隆水牛胚胎后,可显著提高囊胚率至 63.77%;当浓度为 10 μM 时,可将凋亡指数降至 4.36;5 μM 浓度可使总细胞数增加至 396.85,而 20 μM 浓度则会促进细胞凋亡。
m-Carboxycinnamic acid bishydroxamide (5-50 μM;10 小时) 处理人工克隆水牛胚胎可使整体 H3K9ac 水平提升至体外受精 (IVF) 囊胚的水平,而 10 μM 的该试剂可特异性降低整体 H3K27me3 水平 (尽管未达到 IVF 水平)。
m-Carboxycinnamic acid bishydroxamide (10 μM;10 小时) 处理人工克隆水牛胚胎可上调 OCT-4、NANOG 和 BCL-XL 的表达,下调 BAX 的表达,且不改变 p53、CASPASE3、DNMT1、DNMT3a 或 HDAC1 的表达。
m-Carboxycinnamic acid bishydroxamide (20 μM;10 小时) 处理小鼠 1 细胞卵丘细胞体细胞核移植 (SCNT) 胚胎可加快并增强 H3K9、H3K18 和 H4K5 位点的组蛋白乙酰化水平,且不会改变 DNA 甲基化水平。
m-Carboxycinnamic acid bishydroxamide (20 μM;10 小时) 处理小鼠卵丘细胞体细胞核移植 (SCNT) 胚胎可显著增强体外的突起形成、细胞增殖及 Oct4 阳性细胞丰度。

Real Time qPCR

Cell Line: hand-made cloned buffalo embryos
Concentration: 10 μM
Incubation Time: 10 h
Result: Upregulated OCT-4, NANOG, and BCL-XL expression.
Downregulated BAX expression.
Did not alter expression of p53, CASPASE3, DNMT1, DNMT3a, or HDAC1.

Cell Proliferation Assay

Cell Line: mouse cumulus cell SCNT embryos
Concentration: 20 μM
Incubation Time: 10 h
Result: Significantly enhanced outgrowth formation, proliferation, and Oct4-positive cell abundance.
体内研究
(In Vivo)

m-Carboxycinnamic acid bishydroxamide (CBHA) (20 μM;孵育 6 小时) 可将雄激素胚胎的囊胚率提升至 18.1%,改善衍生 CaES 细胞中印记基因的表达模式,并支持嵌合体形成,嵌合体形成率最高可达 2.6%且具有多组织贡献。
m-Carboxycinnamic acid bishydroxamide (1-300 μM;体外暴露10 小时) 可改善小鼠体细胞核移植 (SCNT) 胚胎的植入前及植入后发育,将足月活产率提升至 3.6-3.8%,并通过提高囊胚质量、减少细胞凋亡及促进增殖性生长,将核移植胚胎干细胞 (NT-ES) 的分离效率提升至 59%。

Animal Model: B6D2F1 (8-week-old female; C57BL/6J×DBA/2); 129S2/SvPasCrl (male; 129Sv); SCID Beige (6-week-old male); CD-1
Dosage: 20 μM
Administration: incubation; 6 hours
Result: Increased the blastocyst rate of androgenetic embryos to 18.1%.
Enabled derived CaES cell lines to show a normal 40, XY karyotype, and express pluripotent markers (Oct4, Sox2, Nanog, SSEA-1) at levels similar to zygote-derived R1 ES cells.
Supported derived CaES cell lines to form teratomas containing all three germ layers when injected into SCID Beige mice.
Improved imprinted gene expression patterns in derived CaES cells, with paternal genes Dio3 and U2af1-rs1 and maternal gene H19 matching R1 ES cell levels.
Supported CaES-1 cells to yield a 2.6% chimera rate (11 chimeras from 421 manipulated embryos) with contribution to 9 tissues.
Supported CaES-2 cells to yield a 1.8% chimera rate (8 chimeras from 445 manipulated embryos).
Animal Model: B6D2F1 (female, 8-12 weeks old); ICR (female, 8-12 weeks old, foster)
Dosage: 0.1 μM; 1 μM; 5 μM; 20 μM; 100 μM; 300 μM
Administration: in vitro exposure; 10 h post-reconstruction
Result: Increased blastocyst rates to 71.2% (1 μM) and 69.5% (20 μM) from 2-cell embryos, compared to 32.9% in untreated controls and 54.8% in TSA-treated embryos.
Increased total blastocyst cell count to 63.59 and inner cell mass (ICM) cell count to 18.14 (20 μM), compared to 46.47 and 11.73 in untreated controls.
Reduced apoptotic cell percentage to 7.1% (20 μM), compared to 13.9% in untreated controls.
Increased embryo implantation rate to >60% (1 μM, 20 μM), compared to 28% in untreated controls.
Increased embryo recovery rate at E7.5 to 30% (1 μM, 20 μM), compared to 15% in untreated controls.
Increased gastrulating embryo percentage to 87.5% (1 μM) and 82% (20 μM), compared to 60% in untreated controls.
Yielded live offspring rates of 3.7% (1 μM), 3.8% (5 μM), and 3.6% (20 μM) from transferred 2-cell embryos, compared to 0.8% in untreated controls.
Increased outgrowth formation rate to 86% and NT-ES cell derivation rate to 59% (20 μM), compared to 23% and 10% in untreated controls, respectively.
Increased outgrowth total cell count to 744.7 and Oct4-positive cell count to 74.7 at day 4 (20 μM), compared to 246.4 and 44.1 in untreated controls.
Enhanced outgrowth area expansion over days 2-4 post-plating (20 μM).
性状 固体
颜色 White to off-white

化学信息

分子量 222.20
分子式 C10H10N2O4
CAS No. 174664-65-4
别名 CBHA

储存&溶解度

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 25 mg/mL (112.51 mM; 超声加热助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM4.5005 mL22.5023 mL45.0045 mL112.5113 mL
5 mM0.9001 mL4.5005 mL9.0009 mL22.5023 mL
10 mM0.4500 mL2.2502 mL4.5005 mL11.2511 mL
15 mM0.3000 mL1.5002 mL3.0003 mL7.5008 mL
20 mM0.2250 mL1.1251 mL2.2502 mL5.6256 mL
25 mM0.1800 mL0.9001 mL1.8002 mL4.5005 mL
30 mM0.1500 mL0.7501 mL1.5002 mL3.7504 mL
40 mM0.1125 mL0.5626 mL1.1251 mL2.8128 mL
50 mM0.0900 mL0.4500 mL0.9001 mL2.2502 mL
60 mM0.0750 mL0.3750 mL0.7501 mL1.8752 mL
80 mM0.0563 mL0.2813 mL0.5626 mL1.4064 mL
100 mM0.0450 mL0.2250 mL0.4500 mL1.1251 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础