Ceralifimod

Synonyms: ONO-4641
Ceralifimod (ONO-4641) 是一种对 1-磷酸鞘氨醇受体 1 和 5(S1P1 和 S1P5)具有强效选择性的激动剂,其对人类 S1P1 和 S1P5 的 EC50 值分别为 27.3 pM 和 334 pM。
产品编号: MS-Z43432 纯度: 99.29% CAS No.: 891859-12-4 分子式: C27H33NO4 分子量: 435.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

Ceralifimod (ONO-4641) 是一种对 1-磷酸鞘氨醇受体 1 和 5(S1P1 和 S1P5)具有强效选择性的激动剂,其对人类 S1P1 和 S1P5 的 EC50 值分别为 27.3 pM 和 334 pM。

生物实验数据

生物活性 Ceralifimod (ONO-4641) is a potent and selective agonist of sphingosine-1-phosphate receptors 1 and 5 (S1P1 and S1P5), with EC50 values of 27.3 pM and 334 pM for human S1P1 and S1P5, respectively.
IC50 & Target S1P1 (human):(EC50)27.3 pM, S1P5 (human):334 pM(EC50)
体外研究
(In Vitro)

Ceralifimod (ONO-4641) has an agonistic action for S1P1 and S1P5, and there is no difference between human and rat in the agonistic action of Ceralifimod (ONO-4641) for S1P1. Ceralifimod (ONO-4641) also induces S1P1 down-regulation in a concentration-dependent manner and by approximately 90% at concentration of 25 nM.

体内研究
(In Vivo)

The clinical scores of the Ceralifimod (ONO-4641) 0.03 and 0.1 mg/kg groups remain lower than that in the control group. The maximum clinical scores decrease dose-dependently in the Ceralifimod (ONO-4641) groups and those in the Ceralifimod (ONO-4641) 0.03 and 0.1 mg/kg groups are significantly lower than that in the control group. Specifically, paralysis is inhibited completely in seven of eight animals in the Ceralifimod (ONO-4641) 0.1 mg/kg group.
In normal NOD mice, the number of peripheral blood lymphocytes is decreased by approximately 20, 60 and 80% at 24 h after a single oral dose of 0.01, 0.03 and 0.1 mg/kg of Ceralifimod (ONO-4641), respectively. In the control group of the NOD mouse model of relapsing-remitting EAE, the relapse rate is 90.0%, and two of the nine animals die. The cumulative clinical score in the control group is 65.4±18.50. In contrast, none of animals in the Ceralifimod (ONO-4641) 0.1 mg/kg group have a relapse; that is, Ceralifimod completely prevents relapse at a dose of 0.1 mg/kg. In the Ceralifimod (ONO-4641) groups, two of the nine animals in the 0.01 mg/kg die.

性状 固体
颜色 White to off-white

化学信息

分子量 435.56
分子式 C27H33NO4
CAS No. 891859-12-4
别名 ONO-4641

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 2.86 mg/mL (6.57 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.2959 mL11.4795 mL22.9589 mL57.3974 mL
5 mM0.4592 mL2.2959 mL4.5918 mL11.4795 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础