β-Aminoarteether

Synonyms: SM934 free base
β-Aminoarteether(SM934 free base)是一种具有口服活性的 Artemisinin 衍生物,可用于炎症和自身免疫性疾病(如狼疮疾病)的研究。
产品编号: MS-Z34811 纯度: 99.29% CAS No.: 133162-24-0 分子式: C17H29NO5 分子量: 327.42
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

β-Aminoarteether(SM934 free base)是一种具有口服活性的 Artemisinin 衍生物,可用于炎症和自身免疫性疾病(如狼疮疾病)的研究。

生物实验数据

生物活性 β-Aminoarteether (SM934 free base) is an orally active Artemisinin derivative that can be used for research on inflammatory and autoimmune diseases, such as lupus disease.
体外研究
(In Vitro)

β-Aminoarteether (SM934;10 µM; 24 hours) treatment directly enhances IL-10 production and suppresses IL-12/23p40 production in primary peritoneal macrophages with IFN-γ stimulation.
In vitro, β-Aminoarteether (SM934) could suppress the Th1 and Th17 polarization, but exerted no influence on Treg differentiation.

体内研究
(In Vivo)

β-Aminoarteether (SM934; 1-10 mg/kg; oral administration; daliy; for 3 months) treatment significantly delays the progression of glomerulonephritis and increases the survival rate of NZB/W F1 mice. β-Aminoarteether treatment promots the IL-10 production of macrophages from NZB/W F1 mice.

Animal Model: Female NZB/W F1 mice (Six and half months old)
Dosage: 1 mg/kg, 3 mg/kg, and 10 mg/kg
Administration: Oral administration; daliy; for 3 months
Result: Significantly delayed the progression of glomerulonephritis and increased the survival rate of NZB/W F1 mice.
性状 油状物
颜色 Light yellow to yellow

化学信息

分子量 327.42
分子式 C17H29NO5
CAS No. 133162-24-0
别名 SM934 free base

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (6.11 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Pure form -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (152.71 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM3.0542 mL15.2709 mL30.5418 mL76.3545 mL
5 mM0.6108 mL3.0542 mL6.1084 mL15.2709 mL
10 mM0.3054 mL1.5271 mL3.0542 mL7.6355 mL
15 mM0.2036 mL1.0181 mL2.0361 mL5.0903 mL
20 mM0.1527 mL0.7635 mL1.5271 mL3.8177 mL
25 mM0.1222 mL0.6108 mL1.2217 mL3.0542 mL
30 mM0.1018 mL0.5090 mL1.0181 mL2.5452 mL
40 mM0.0764 mL0.3818 mL0.7635 mL1.9089 mL
50 mM0.0611 mL0.3054 mL0.6108 mL1.5271 mL
60 mM0.0509 mL0.2545 mL0.5090 mL1.2726 mL
80 mM0.0382 mL0.1909 mL0.3818 mL0.9544 mL
100 mM0.0305 mL0.1527 mL0.3054 mL0.7635 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础