RANKL-IN-1 是一种选择性核因子-κB 配体受体激活剂配体 (RANKL) 抑制剂,其 KD 值为 7.6 μM,对破骨细胞生成具有抑制活性和选择性,IC50 值为 0.07 μM,SI 为 82.57,可直接与 RANKL 结合并阻断 RANKL 诱导的 NF-κB 和 MAPK 通路激活,可用于骨质疏松症等代谢性疾病的研究。
产品编号: MS-Z12639 CAS No.: 3108878-05-0 分子式: C40H55N5O 分子量: 621.90
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
询价
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

RANKL-IN-1 是一种选择性核因子-κB 配体受体激活剂配体 (RANKL) 抑制剂,其 KD 值为 7.6 μM,对破骨细胞生成具有抑制活性和选择性,IC50 值为 0.07 μM,SI 为 82.57,可直接与 RANKL 结合并阻断 RANKL 诱导的 NF-κB 和 MAPK 通路激活,可用于骨质疏松症等代谢性疾病的研究。

生物实验数据

生物活性 RANKL-IN-1 is a selective receptor activator of nuclear factor-κB ligand (RANKL) inhibitor with a KD value of 7.6 μM, exhibits inhibitory activity and selectivity against osteoclastogenesis with an IC50 value of 0.07 μM and an SI of 82.57, directly binds to RANKL and blocks RANKL-induced activation of the NF-κB and MAPK pathways, and can be used for research on metabolic diseases such as osteoporosis.
IC50 & Target

MMP-9

 

体外研究
(In Vitro)

RANKL-IN-1 (Compound 19u) (50-400 nM, 4 days) 在 RAW264.7 细胞中无明显细胞毒性。
RANKL-IN-1 (50-400 nM, 4 days) 在 RAW264.7 细胞中可抑制 RANKL 诱导的破骨细胞生成,且不影响成骨细胞分化。
RANKL-IN-1 (50-400 nM, 4 days) 能降低 RAW264.7 细胞中 RANKL 诱导的活性氧 (ROS) 水平,并抑制骨吸收。
RANKL-IN-1 (50-400 nM, 4 days) 可抑制 RAW264.7 细胞中与 RANKL 诱导的破骨细胞分化相关的蛋白表达。

Immunofluorescence

Cell Line: RAW264.7 cells
Concentration: 50, 100, 200 and 400 nM
Incubation Time: 4 days
Result: Decreased the size of the F-actin ring.
Reduced ROS levels.

Western Blot Analysis

Cell Line: RAW264.7 cells
Concentration: 50, 100, 200 and 400 nM
Incubation Time: 4 days
Result: Downregulated the protein expression of TRAF6 and phosphorylation of p65, p38, ERK and JNK.
Downregulated the activity of the c-Fos/NFATc1 signaling and inhibited the expression of CTSK and MMP-9.
体内研究
(In Vivo)

RANKL-IN-1 (Compound 19u) (0.313-1.25 μg/mL, 96 h) 减轻了斑马鱼骨质疏松模型中的骨丢失。
RANKL-IN-1 (0.5-2 mg/kg,口服,每 2 天一次,持续 11 周) 可防止卵巢切除诱导的骨质疏松小鼠模型中的全身性骨丢失。

Animal Model: Zebrafish osteoporosis models
Dosage: 0.313, 0.625 and 1.25 μg/mL
Administration: 96 h
Result: Increased zebrafish skull bone mass.
Animal Model: Ovariectomy-induced osteoporosis mice models
Dosage: 0.5, 1 and 2 mg/kg
Administration: Orally administration, every 2 days for 11 weeks
Result: Increased the bone mineral density, bone volume fraction, trabecular number and the trabecular thickness.
Reduced the trabecular separation and expanded the marrow cavity and trabecular spacing.
Reduced total cholesterol and triglyceride levels and increased high-density lipoprotein cholesterol levels.
Had no significant changes in ALT, AST and BUN levels.

化学信息

分子量 621.90
分子式 C40H55N5O
CAS No. 3108878-05-0

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础