ADP-β-S trilithium

Synonyms: Adenosine 5'-β-thiodiphosphate trilithium
ADP-β-S(Adenosine 5'-(β-thiodiphosphate) trilithium)是一种不可水解的 ADP 类似物和 P2Y12 受体激活剂,可激活小胶质细胞的 P2Y12 受体以触发下游炎症信号通路,也可激活大鼠胰腺 β 细胞的 P2Y 嘌呤能受体以增强葡萄糖诱导的胰岛素分泌,因此可用于炎症、糖尿病等疾病的研究。
产品编号: MS-Z09031 纯度: 94.9% CAS No.: 73536-95-5 分子式: C10H12Li3N5O9P2S 分子量: 461.07
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in Water
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

ADP-β-S(Adenosine 5'-(β-thiodiphosphate) trilithium)是一种不可水解的 ADP 类似物和 P2Y12 受体激活剂,可激活小胶质细胞的 P2Y12 受体以触发下游炎症信号通路,也可激活大鼠胰腺 β 细胞的 P2Y 嘌呤能受体以增强葡萄糖诱导的胰岛素分泌,因此可用于炎症、糖尿病等疾病的研究。

生物实验数据

生物活性 ADP-β-S (Adenosine 5'-(β-thiodiphosphate) trilithium) is a non-hydrolyzable ADP analog and P2Y12 receptor activator that activates P2Y12 receptors on microglia to trigger downstream inflammatory signaling pathways and activates P2Y purinergic receptors on rat pancreatic β cells to enhance glucose-induced insulin secretion, and is therefore useful for research on diseases such as inflammation and diabetes.
IC50 & Target

P2Y12 Receptor

 

IL-6

 

IL-1β

 

Caspase-1

 

体外研究
(In Vitro)

ADP-β-S (0.2-2 mM; 30 min) trilithium 可通过 P2Y12 受体促进原代培养小鼠小胶质细胞产生 IL-1β,当与 LPS 或 LPS 联合 ATP 刺激联用时,在 0.2 mM 和 2 mM 浓度下可观察到显著效应。
ADP-β-S (0.2 mM; 30 min) trilithium 可增强野生型 MG6 小鼠小胶质细胞中 LPS 联合 ATP 诱导的 IL-1β 产生,但在 P2ry12 敲除型 MG6 细胞中无此作用,证实该效应依赖于 P2Y12 受体。
ADP-β-S (0.2 mM; 24 h) trilithium 可通过 P2Y12 受体增强 MG6 小鼠小胶质细胞中 LPS 诱导的 IL-6 产生。
ADP-β-S (0.2 mM; 24 h) trilithium 可通过 P2Y12 受体增强原代培养小鼠小胶质细胞中 LPS 诱导的 IL-6 生成。
ADP-β-S (0.2 mM; 24 h) trilithium 可增强野生型 MG6 小鼠小胶质细胞中 LPS 诱导的 IL-6 产生,但在 P2ry12 敲除型 MG6 细胞中无此作用,证实该效应依赖于 P2Y12 受体。
ADP-β-S (0.2 mM; 24 h) trilithium 可增强 MG6 小鼠小胶质细胞中 LPS 诱导的 NF-κB 活化,包括核转位与磷酸化。
ADP-β-S (0.2-2 mM; 30 min) trilithium 在 2 mM 浓度下激活 caspase-1,在 0.2 mM 浓度下增强 LPS 联合 ATP 诱导的 MG6 小鼠小胶质细胞中 caspase-1 的激活。
ADP-β-S (0.2 mM; 30 min) trilithium 可增强 LPS 联合 ATP 诱导的 MG6 小鼠小胶质细胞线粒体膜电位破坏。

ELISA Assay

Cell Line: primary cultured murine microglia
Concentration: 0.2 mM, 2 mM
Incubation Time: 30 min
Result: Induced significant IL-1β release when paired with LPS at 2 mM, which was partially blocked by PSB0739.
Induced modest but significant IL-1β release when paired with LPS at 0.2 mM.
Significantly augmented ATP-induced IL-1β production when added alongside LPS plus 1 or 2 mM ATP at 0.2 mM, and this augmentation was suppressed by PSB0739.

ELISA Assay

Cell Line: wild-type and P2ry12 KO MG6 immortalized murine microglial cells
Concentration: 0.2 mM
Incubation Time: 30 min
Result: Significantly increased IL-1β production in wild-type MG6 cells stimulated with LPS plus ATP.
Had no effect on IL-1β production in P2ry12 KO MG6 cells under the same conditions.

ELISA Assay

Cell Line: MG6 immortalized murine microglial cells
Concentration: 0.2 mM
Incubation Time: 24 h
Result: Significantly increased LPS-induced IL-6 production in MG6 cells, and this increase was abrogated by the P2Y12 receptor antagonist PSB0739.

ELISA Assay

Cell Line: primary cultured murine microglia
Concentration: 0.2 mM
Incubation Time: 24 h
Result: Significantly increased LPS-induced IL-6 production in primary microglia, and this increase was reduced by the P2Y12 receptor antagonist PSB0739.

ELISA Assay

Cell Line: wild-type and P2ry12 KO MG6 immortalized murine microglial cells
Concentration: 0.2 mM
Incubation Time: 24 h
Result: Significantly increased LPS-induced IL-6 production in wild-type MG6 cells.
Had no effect on IL-6 production in P2ry12 KO MG6 cells under the same conditions.

Western Blot Analysis

Cell Line: MG6 immortalized murine microglial cells
Concentration: 0.2 mM, 2 mM
Incubation Time: 30 min
Result: Activated caspase-1 when paired with LPS at 2 mM, as shown by presence of cleaved caspase-1 in culture supernatants.
Strongly enhanced caspase-1 activation when paired with LPS plus 1 mM ATP at 0.2 mM compared to LPS plus ATP alone.
性状 固体
颜色 White to off-white

化学信息

分子量 461.07
分子式 C10H12Li3N5O9P2S
CAS No. 73536-95-5
别名 Adenosine 5'-β-thiodiphosphate trilithium

储存&溶解度

储存方式

-20°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

H2O 中的溶解度 : 20 mg/mL (43.38 mM; 超声加热助溶)

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O1 mM2.1689 mL10.8443 mL21.6887 mL54.2217 mL
5 mM0.4338 mL2.1689 mL4.3377 mL10.8443 mL
10 mM0.2169 mL1.0844 mL2.1689 mL5.4222 mL
15 mM0.1446 mL0.7230 mL1.4459 mL3.6148 mL
20 mM0.1084 mL0.5422 mL1.0844 mL2.7111 mL
25 mM0.0868 mL0.4338 mL0.8675 mL2.1689 mL
30 mM0.0723 mL0.3615 mL0.7230 mL1.8074 mL
40 mM0.0542 mL0.2711 mL0.5422 mL1.3555 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础