TRAF-STOP inhibitor 6877002

TRAF-STOP inhibitor 6877002 是一种选择性 CD40-TRAF6 相互作用抑制剂,通过阻断 CD40-TRAF6 信号通路,抑制经典单核细胞活化、白细胞募集以及巨噬细胞活化和迁移,从而发挥抗动脉粥样硬化作用,并降低经典 NF-κB 通路中信号中间体的磷酸化水平。
产品编号: MS-Z00360 纯度: 99.67% CAS No.: 433249-94-6 分子式: C17H17NO 分子量: 251.32
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

TRAF-STOP inhibitor 6877002 是一种选择性 CD40-TRAF6 相互作用抑制剂,通过阻断 CD40-TRAF6 信号通路,抑制经典单核细胞活化、白细胞募集以及巨噬细胞活化和迁移,从而发挥抗动脉粥样硬化作用,并降低经典 NF-κB 通路中信号中间体的磷酸化水平。

生物实验数据

生物活性 TRAF-STOP inhibitor 6877002 is a selective CD40-TRAF6 interaction inhibitor that exerts anti-atherosclerotic effects by blocking the CD40-TRAF6 signaling pathway to inhibit classical monocyte activation, leukocyte recruitment, and macrophage activation and migration, and reduces the phosphorylation levels of signaling intermediates in the classical NF-κB pathway.
IC50 & Target

CD40-TRAF6 interaction; NF-κB

体外研究
(In Vitro)

TRAF-STOP inhibitor 6877002 (10 μM; 10 min-24 h) 在骨髓来源的巨噬细胞(BMDMs)实验中,降低了 CD40 诱导的 TNF-α、IL-1β、IL-6、IL-10、IL-12 和诱导型一氧化氮合酶(iNOS)的表达和 Tak1 和 NF-κB p65 的磷酸化水平。并且降低了 CCL2-CCR2 和 CCL5-CCR5 趋化因子-趋化因子受体对的表达。
TRAF-STOP inhibitor 6877002 (10 μM) 在骨髓来源的巨噬细胞(BMDMs)实验中,降低了 CD36 的表达,导致氧化低密度脂蛋白摄取减少和巨噬细胞泡沫细胞形成减少。

Western Blot Analysis

Cell Line: BMDMs
Concentration: 10 μM
Incubation Time: 10 min, 24 hours
Result: Reduced the CD40-induced phosphorylation of Tak1 and NF-κB p65, whereas the levels of NF-κB2 p52 and the phosphorylation of ERK1/2 were not affected.
体内研究
(In Vivo)

TRAF-STOP inhibitor 6877002(10 μmol/kg;腹腔注射;每天 1 次;6 周)在载脂蛋白 E 缺陷(Apoe-/-)小鼠中,减缓早期动脉粥样硬化发展,减少动脉粥样硬化斑块面积。
TRAF-STOP inhibitor 6877002(10 μmol/kg;腹腔注射;每天 1 次;6 周)在载脂蛋白 E 缺陷(Apoe-/-)小鼠中,阻止已形成的动脉粥样硬化进展,使斑块呈现稳定表型,减少斑块内巨噬细胞数量和增殖、减小坏死核心、减少中性粒细胞和 T 细胞数量,并增加胶原蛋白和 αSMA+ 平滑肌细胞含量。
TRAF-STOP inhibitor 6877002(10 μmol/kg;重组高密度脂蛋白纳米颗粒包裹给药;每周 2 次;6 周)在载脂蛋白 E 缺陷(Apoe-/-)小鼠中,减少主动脉根部斑块体积和斑块内巨噬细胞数量。

Animal Model: Male apolipoprotein E-deficient (Apoe-/-) mice (22 weeks old), with advanced atherosclerotic lesions already present in the aortic arch to establish an established atherosclerosis model.
Dosage: 10 μmol/kg (vehicle: PBS, 0.05% Tween 80, 5% dimethylsulfoxide)
Administration: Intraperitoneal injection, once a day, for 6 weeks
Result: Halted the progression of established atherosclerosis, reduced the total atherosclerotic plaque area in the aortic arch and aortic root. The atherosclerotic plaques exhibited a stable phenotype with decreased macrophage number and proliferation, smaller necrotic cores, fewer neutrophils and T cells, and increased collagen and αSMA+ smooth muscle cell content.
Animal Model: Male apolipoprotein E-deficient (Apoe-/-) mice (12 weeks old), fed a normal chow diet to establish an atherosclerosis-prone model.
Dosage: 10 μmol/kg (vehicle: PBS, 0.05% Tween 80, 5% dimethylsulfoxide)
Administration: Intraperitoneal injection, once a day, for 6 weeks
Result: Retarded the development of early atherosclerosis, reduced atherosclerotic plaque area in the aortic arch, and the plaques contained fewer macrophages, T cells, and neutrophils. There were no changes in the number of proliferating or apoptotic cells, plaque smooth muscle cell or collagen content.
Animal Model: Male apolipoprotein E-deficient (Apoe-/-) mice (12 weeks old) with atherosclerosis model.
Dosage: 10 μmol/kg (packaged in recombinant high-density lipoprotein nanoparticles)
Administration: Administered via recombinant high-density lipoprotein nanoparticles, twice a week, for 6 weeks
Result: Reduced plaque volume in the aortic root and the number of macrophages in plaques.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 251.32
分子式 C17H17NO
CAS No. 433249-94-6

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 4.00 mg/mL (15.92 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (397.90 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM3.9790 mL19.8950 mL39.7899 mL99.4748 mL
5 mM0.7958 mL3.9790 mL7.9580 mL19.8950 mL
10 mM0.3979 mL1.9895 mL3.9790 mL9.9475 mL
15 mM0.2653 mL1.3263 mL2.6527 mL6.6317 mL
20 mM0.1989 mL0.9947 mL1.9895 mL4.9737 mL
25 mM0.1592 mL0.7958 mL1.5916 mL3.9790 mL
30 mM0.1326 mL0.6632 mL1.3263 mL3.3158 mL
40 mM0.0995 mL0.4974 mL0.9947 mL2.4869 mL
50 mM0.0796 mL0.3979 mL0.7958 mL1.9895 mL
60 mM0.0663 mL0.3316 mL0.6632 mL1.6579 mL
80 mM0.0497 mL0.2487 mL0.4974 mL1.2434 mL
100 mM0.0398 mL0.1989 mL0.3979 mL0.9947 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础