Batiraxcept

Synonyms: AVB-500; AVB-S6-500
Batiraxcept (AVB-500; AVB-S6-500) 是一种选择性、可溶性 AXL 受体和 GAS6 抑制剂,靶向 GAS6-AXL 信号轴,无口服活性且无法通过血脑屏障,它通过竞争性结合 GAS6 (KD <1 nM) 阻止其与 AXL 受体酪氨酸激酶相互作用,从而抑制下游 PI3K/AKT 和 MAPK 信号通路,减少肿瘤细胞糖酵解、血管生成和转移潜力,并在子宫内膜癌、胆管癌和卵巢癌等临床前模型中通过抑制肿瘤生长、侵袭和转移展现抗肿瘤活性。
产品编号: MS-Y96300 纯度: 99.91% CAS No.: 2268717-61-7
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价

产品描述

Batiraxcept (AVB-500; AVB-S6-500) 是一种选择性、可溶性 AXL 受体和 GAS6 抑制剂,靶向 GAS6-AXL 信号轴,无口服活性且无法通过血脑屏障,它通过竞争性结合 GAS6 (KD <1 nM) 阻止其与 AXL 受体酪氨酸激酶相互作用,从而抑制下游 PI3K/AKT 和 MAPK 信号通路,减少肿瘤细胞糖酵解、血管生成和转移潜力,并在子宫内膜癌、胆管癌和卵巢癌等临床前模型中通过抑制肿瘤生长、侵袭和转移展现抗肿瘤活性。

生物实验数据

生物活性 Batiraxcept (AVB-500; AVB-S6-500) is a selective, soluble AXL receptor and GAS6 inhibitor targeting the GAS6-AXL signaling axis that is not orally active and cannot cross the blood-brain barrier; it competitively binds GAS6 (KD <1 nM), preventing its interaction with the AXL receptor tyrosine kinase, thereby inhibiting downstream PI3K/AKT and MAPK signaling pathways, reducing tumor cell glycolysis, angiogenesis, and metastatic potential, and demonstrating antitumor activity by inhibiting tumor growth, invasion, and metastasis in preclinical models of endometrial cancer, cholangiocarcinoma, and ovarian cancer.
IC50 & Target

Axl

 

体外研究
(In Vitro)

Batiraxcept (2 μM;24 h) 抑制化疗耐药子宫内膜癌细胞 (ARK1、PUC198) 活力,并与 12.5 nM Paclitaxel (HY-B0015) 协同作用,减少糖酵解代谢物及 pAKT 信号。
Batiraxcept (100 μg/mL;24 h) 在 Matrigel 侵袭和划痕实验中降低胆管癌细胞 (SNU1196、HUCCT1) 的侵袭和迁移能力。

Cell Viability Assay

Cell Line: ARK1, PUC198 (human endometrial cancer)
Concentration: 2 μM
Incubation Time: 24 h
Result: Showed a 40-60% reduction in viability compared to control, with synergistic effect when combined with Paclitaxel.
体内研究
(In Vivo)

Batiraxcept (30 mg/kg;腹腔注射;每周两次;4 周) 在小鼠子宫内膜癌 (ARK1 细胞) 异种移植模型中显著抑制肿瘤生长和转移,减少肿瘤体积,减少转移结节。
Batiraxcept (50 mg/kg,100 mg/kg;腹腔注射;每 2 天 1 次;25 天) 在小鼠子宫内膜癌 (SNU1196 细胞) 异种移植模型中显著减少胆管肿瘤细胞在腹腔内的播散,且不会影响免疫缺陷小鼠的体重。

Animal Model: BALB/c nude mice (female, 6-8 weeks old, 18-22 g), ARK1 cell-derived endometrial cancer xenograft model
Dosage: 30 mg/kg
Administration: Intraperitoneal injection (i.p.), twice weekly for 4 weeks, starting 1 week after tumor cell inoculation
Result: -Tumor Growth:
Tumor volume was measured by caliper every 3 days. At the end of the treatment, the average tumor volume in the Batiraxcept group was 60% smaller than that in the control group.
-Metastasis:
Lung metastasis was evaluated by counting the number of metastatic nodules after sacrifice. The number of metastatic nodules in the Batiraxcept group was reduced by 80% compared to the control group.
Clinical Trial
NCT NumberSponsorConditionStart DatePhase
NCT04019288M.D. Anderson Cancer Center|Aravive Biologics Inc|AstraZeneca
Platinum-Resistant Fallopian Tube Carcinoma|Platinum-Resistant Ovarian Carcinoma|Platinum-Resistant Primary Peritoneal Carcinoma|Recurrent Fallopian Tube Carcinoma|Recurrent Ovarian Carcinoma|Recurrent Primary Peritoneal Carcinoma|Refractory Fallopian Tube Carcinoma|Refractory Ovarian Carcinoma|Refractory Primary Peritoneal Carcinoma
2019-12-03PHASE1|PHASE2
NCT04300140Aravive, Inc.
Clear Cell Renal Cell Carcinoma
2021-02-26PHASE1|PHASE2
NCT04983407Aravive, Inc.
Pancreatic Adenocarcinoma
2021-07-28PHASE1|PHASE2
性状 液体
颜色 Colorless to light yellow

化学信息

CAS No. 2268717-61-7
别名 AVB-500; AVB-S6-500

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Shipping with dry ice.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础