PI3K/mTOR-IN-20

PI3K/mTOR-IN-20 是一种选择性双重 PI3K/mTOR 抑制剂,在 MRC-5 和 Mlg2908 细胞中展现出纳摩尔级抗增殖效果,IC50 值分别为 0.380 和 0.090 μM,在 Bleomycin 诱导的肺纤维化模型中能够降低 Ashcroft 评分、减少羟脯氨酸含量和胶原沉积、下调纤维化相关蛋白表达并修复肺组织结构,同时表现出良好的安全性,小鼠体重稳定恢复且未出现明显的肝、肾毒性,可用于肺成纤维细胞的相关研究。
PI3K/mTOR-IN-20
产品编号: MS-Y80131 分子式: C29H24F2N8O4S 分子量: 618.61
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PI3K/mTOR-IN-20 是一种选择性双重 PI3K/mTOR 抑制剂,在 MRC-5 和 Mlg2908 细胞中展现出纳摩尔级抗增殖效果,IC50 值分别为 0.380 和 0.090 μM,在 Bleomycin 诱导的肺纤维化模型中能够降低 Ashcroft 评分、减少羟脯氨酸含量和胶原沉积、下调纤维化相关蛋白表达并修复肺组织结构,同时表现出良好的安全性,小鼠体重稳定恢复且未出现明显的肝、肾毒性,可用于肺成纤维细胞的相关研究。

生物实验数据

生物活性 PI3K/mTOR-IN-20 is a selective dual PI3K/mTOR inhibitor that exhibits nanomolar-level antiproliferative activity in MRC-5 and Mlg2908 cells with IC50 values of 0.380 and 0.090 μM, respectively, and in a Bleomycin-induced pulmonary fibrosis model it reduces the Ashcroft score, decreases hydroxyproline content and collagen deposition, downregulates fibrosis-related protein expression, and restores lung tissue structure, while demonstrating a favorable safety profile with stable body weight recovery in mice and no obvious hepatotoxicity or nephrotoxicity, making it suitable for research on lung fibroblasts.
IC50 & Target

PI3Kα

 

PI3Kβ

 

PI3Kγ

 

PI3Kδ

 

PI3K

 

体外研究
(In Vitro)

PI3K/mTOR-IN-20 (compound 11) (处理 72 小时) 对 MRC-5 和 Mlg2908 细胞展现出纳摩尔级抗增殖活性,其 IC50值分别为 0.38 和 0.09 μM。
PI3K/mTOR-IN-20 (1 μM) 可有效抑制 mTOR 及 I 类 PI3K 亚型 (α、β 和 γ),同时对 PI3Kδ 的抑制活性较弱 (对 PI3Kα、PI3Kβ、PI3Kγ 和 mTOR 的抑制率分别为 94.89%、79.24%、42.60% 和 42.99%)。
PI3K/mTOR-IN-20 (1 μM,处理 48 小时) 能有效抑制 MRC-5 细胞中的 PI3K 活性并减弱成纤维细胞活化。

Western Blot Analysis

Cell Line: MRC-5 cells
Concentration: 1 μM
Incubation Time: 48h
Result: Significantly reduced AKT phosphorylation (pAKT).
Suppressed the expression of key pulmonary fibrosis-associated proteins, fibroblast activation protein (FAP), fibronectin (FN), and α-smooth muscle actin (α-SMA).
体内研究
(In Vivo)

PI3K/mTOR-IN-20 (compound 11) (15 mg/kg,腹腔注射,每日一次,持续 11 天) 在 Bleomycin (BLM) 诱导的肺纤维化小鼠模型中表现出强大的抗纤维化效应,可减轻胶原沉积、恢复肺组织结构、抑制促纤维化过程并改善生理指标,且安全性良好。
PI3K/mTOR-IN-20 (15-60 mg/kg,腹腔注射,每日一次,持续 3 天) 在 Bleomycin (BLM) 诱导的肺纤维化小鼠模型中未表现出明显的肝毒性或肾毒性。

Animal Model: Bleomycin (HY-108345A) (0.75 U/kg, i.p.) induced-male C57BL/6 mice (8-10 weeks)
Dosage: 15 mg/kg
Administration: i.p., daily for 11 days
Result: Significantly attenuated the pathological changes, partially restoring normal lung structure and extensiving fibrotic remodeling.
Reduced Ashcroft scores, a quantitative measure of fibrosis severity.
Reversed the BLM-induced increase in the lung index (lung-to-body weight ratio), which reflects edema and fibrotic mass accumulation.
Robustly suppressed BLM-induced increase in d collagen deposition (a hallmark of fibrosis progression).
Mitigated BLM-induced weight loss and maintained steady weight recovery.
Significantly inhibited fibroblast activation protein (FAP) expression.
Animal Model: ICR mice (8 weeks)
Dosage: 15, 30, or 60 mg/kg
Administration: i.p., once daily for 3 days
Result: Revealed minimal toxicity in liver and kidney function.
Remained Serum levels of alanine transaminase (ALT) and aspartate transaminase (AST) within the normal range at doses of 15 and 30 mg/kg.
Unchanged serum creatinine (CREA) and uric acid (UA) levels (markers of kidney function).
No Obvious structure changes occur in the livers.

化学信息

分子量 618.61
分子式 C29H24F2N8O4S

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础