Simeprevir sodium

Synonyms: 西咪匹韦钠; TMC435 sodium; TMC435350 sodium
Simeprevir (TMC435; TMC435350) sodium 是一种有效、高特异性且具有口服活性的丙型肝炎病毒 (HCV) NS3/4A 蛋白酶抑制剂,Ki 值为 0.36 nM,可通过 EC50 值为 7.8 nM 抑制 HCV 复制,同时还能有效抑制 SARS-CoV-2 复制并与瑞德西韦 (Remdesivir) 产生协同作用,以及抑制 SARS-CoV-2 主要蛋白酶 (Mpro) 和 RNA 依赖性 RNA 聚合酶 (RdRp) 并调节宿主免疫反应。
产品编号: MS-Y66793 CAS No.: 1241946-89-3 分子式: C38H47N5NaO7S2
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Simeprevir (TMC435; TMC435350) sodium 是一种有效、高特异性且具有口服活性的丙型肝炎病毒 (HCV) NS3/4A 蛋白酶抑制剂,Ki 值为 0.36 nM,可通过 EC50 值为 7.8 nM 抑制 HCV 复制,同时还能有效抑制 SARS-CoV-2 复制并与瑞德西韦 (Remdesivir) 产生协同作用,以及抑制 SARS-CoV-2 主要蛋白酶 (Mpro) 和 RNA 依赖性 RNA 聚合酶 (RdRp) 并调节宿主免疫反应。

生物实验数据

生物活性 Simeprevir (TMC435; TMC435350) sodium is a potent, highly specific, and orally active hepatitis C virus (HCV) NS3/4A protease inhibitor with a Ki of 0.36 nM that inhibits HCV replication with an EC50 of 7.8 nM, and it also effectively inhibits SARS-CoV-2 replication, acts synergistically with Remdesivir, inhibits SARS-CoV-2 main protease (Mpro) and RNA-dependent RNA polymerase (RdRp), and modulates host immune responses.
IC50 & Target

RNA Polymerase

 

体外研究
(In Vitro)

Simeprevir (TMC435) inhibits HCV in a dose-dependent manner in Huh7-Luc cells, with EC50 and EC90 values of 8 nM and 24 nM, respectively.
Simeprevir (TMC435) inhibits NS3/4A proteases from HCV genotypes 1 to 6 with IC50s of 1/0.9/7/30/1.5/2.2/1.6 nM for 1a/1b/2b/3a/4/5/6, respectively.
Simeprevir inhibits SARS-CoV-2 in Vero E6 cells with an IC50 of 9.6±2.3 μM and 5.5±0.2 μM for Mpro and RdRp, respectively.

体内研究
(In Vivo)

Simeprevir (TMC435) has moderate terminal elimination half-life (t1/2=1.5 h and 4.1 h for rat (3 mg/kg, p.o.), monkey (3 mg/kg, p.o.)).
Simeprevir (TMC435350) exhibits a medium-slow rate of absorption, well distribution with the high concentration observed in the liver, and a low clearance.
Pharmacokinetic Parameters of Simeprevir (TMC435350) in male Sprague-Dawley rats.

IV (2 mg/kg) PO (10 mg/kg)
CL (L/h/kg) 0.505
Vdss (h) 0.49
AUC0-24 (μM·h) 5.21 2.79
Cmax (μM) 0.73
Tmax (h) 3.0
T1/2 (h) 2.8
F (%) 11
Liver/plasma ratio at 6 h 63.5 32

Animal Model: Sprague-Dawley (SD) rats and cynomolgus monkeys
Dosage: 3 mg/kg
Administration: PO; single dosage
Result: Time at which peak concentration (Tmax) of 1 hour and 2 hour for rat and monkey, respectively.
Concentration at 24 h after dosing (C24 h) of 0.9 and 2.3 ng/mL for rat and monkey, respectively.
AUC0-24h=1173 and 1409 ng·h/mL for rat and monkey, respectively.

化学信息

分子式 C38H47N5NaO7S2
CAS No. 1241946-89-3
别名 西咪匹韦钠; TMC435 sodium; TMC435350 sodium

储存&溶解度

溶解度信息
DMSO: Soluble
储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础