GSI526 是一种基于 VHL 泛素-蛋白酶体系统的 IRAK4 PROTAC 降解剂(DC50=40.17 nM,Dmax=97%;THP-1),可抑制 IRAK4 介导的 NF-κB 和 MAPK 炎症信号通路并诱导髓系细胞中 IRAK4 的降解,因此可用于炎症相关研究(粉色:IRAK4 配体 (MS-S91544);蓝色:VHL 配体 (MS-R95960);黑色:连接子)。
GSI526
产品编号: MS-Y57967 分子式: C51H62N10O7S 分子量: 959.17
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

GSI526 是一种基于 VHL 泛素-蛋白酶体系统的 IRAK4 PROTAC 降解剂(DC50=40.17 nM,Dmax=97%;THP-1),可抑制 IRAK4 介导的 NF-κB 和 MAPK 炎症信号通路并诱导髓系细胞中 IRAK4 的降解,因此可用于炎症相关研究(粉色:IRAK4 配体 (MS-S91544);蓝色:VHL 配体 (MS-R95960);黑色:连接子)。

生物实验数据

生物活性 GSI526 is an IRAK4 PROTAC degrader based on the VHL ubiquitin-proteasome system (DC50=40.17 nM, Dmax=97%; THP-1) that inhibits IRAK4-mediated NF-κB and MAPK inflammatory signaling pathways and induces IRAK4 degradation in myeloid cells, making it suitable for inflammation-related research (pink: IRAK4 ligand (MS-S91544); blue: VHL ligand (MS-R95960); black: linker).
IC50 & Target

VHL

 

IRAK4

 

体外研究
(In Vitro)

GSI526 可在 HEK293T 细胞中诱导 IRAK4 呈剂量依赖性降解,其 DC50 为 50.89 nM,Dmax 超过 80%。
GSI526 (0.01-30 μM; 24 h) 在浓度高达 30 μM、孵育 24 h 的条件下,对 THP-1 细胞无细胞毒性。
GSI526 (0.01-30 μM; 48 h) 在孵育 48 h 后,浓度高达 30 μM 时对 HEK293T 细胞也无细胞毒性。
GSI526 (1000 nM; 8 h) 在 THP-1 细胞中对 IRAK4 表现出显著的选择性,经 1000 nM GSI526 处理 8 h 后,IRAK4 出现具有统计学意义的下调。
GSI526 (1-5 μM; 1 h+6 h LPS) 可通过降解 IRAK4,抑制 THP-1 细胞中 LPS 诱导的 IRAK4-NF-κB/MAPK 信号通路激活。
GSI526 (0.3-3 μM; 1 h+24 h LPS) 可通过抑制 IRAK4-NF-κB/MAPK 信号通路,以剂量依赖方式抑制 THP-1 细胞中 LPS 诱导的 TNF-α 和 CXCL8 表达。

Western Blot Analysis

Cell Line: THP-1 human monocytic leukemia cells
Concentration: 1-10000 nM (dose-response); 1 μM (time-course)
Incubation Time: 24 h (dose-response); 2-24 h (time-course)
Result: Induced dose-dependent degradation of IRAK4 with a DC50 of 40.17 nM and a maximum degradation (Dmax) of 97%.
Resulted in detectable IRAK4 degradation within 2 h, with maximal degradation achieved by 8 h, and the degradative effect was sustained for up to 24 h.

Western Blot Analysis

Cell Line: HEK293T human embryonic kidney cells
Concentration: 1-10000 nM
Incubation Time: 24 h
Result: Induced dose-dependent degradation of IRAK4 with a DC50 of 50.89 nM and a Dmax greater than 80%.

Cell Viability Assay

Cell Line: THP-1 human monocytic leukemia cells
Concentration: 0.01-30 μM
Incubation Time: 24 h
Result: Did not induce cytotoxic cell death at concentrations up to 30 μM.

Cell Viability Assay

Cell Line: HEK293T human embryonic kidney cells
Concentration: 0.01-30 μM
Incubation Time: 48 h
Result: Did not induce cytotoxic cell death at concentrations up to 30 μM.

Western Blot Analysis

Cell Line: THP-1 human monocytic leukemia cells
Concentration: 1-5 μM
Incubation Time: 1 h pretreatment, followed by 6 h LPS stimulation
Result: Inhibited LPS-induced phosphorylation of JNK, p38, ERK, and p65 (NF-κB) in a concentration-dependent manner via IRAK4 degradation.

Real Time qPCR

Cell Line: THP-1 human monocytic leukemia cells
Concentration: 0.3-3 μM
Incubation Time: 1 h pretreatment, followed by 24 h LPS stimulation
Result: Significantly inhibited LPS-induced secretion of pro-inflammatory cytokine TNF-α and chemokine CXCL8, with the inhibitory effect particularly evident at 1 and 3 μM.

化学信息

分子量 959.17
分子式 C51H62N10O7S

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础