| 生物活性 | JAK-IN-1 is a JAK1/2/3 inhibitor with IC50 values of 0.26, 0.8, and 3.2 nM for JAK1, JAK2, and JAK3, respectively, and exhibits higher selectivity for JAK3 over JAK1. |
| IC50 & Target | JAK1:0.26 nM , JAK2:0.8 nM , JAK3:3.2 nM |
| 体外研究 (In Vitro) |
JAK-IN-1 inhibits the proliferation of human CD4 and CD8 T cells in a dose-dependent manner upon stimulation by anti-CD3/anti-CD28 antibody-coated beads partially mimicking the activation signals brought to a Tcell by an antigen-presenting cell. JAK-IN-1 is active in both mechanistic and functional cell-based assays using T-cells, one of the major cell types in which JAK3 is potentially relevant. |
| 体内研究 (In Vivo) |
JAK-IN-1 is JAK3 selective in vivo, as judged by higher potency inhibiting JAK1/JAK3- vs JAK2- or JAK1/JAK2/TYK2-driven signaling in whole blood assays. JAK-IN-1 potently inhibits IL-2 stimulated plasma concentrations of JAK-IN-1 for each dose. JAK-IN-1 prevents IL-2-driven STAT5 phosphorylation in a dose- and concentration-dependent manner, with approximately 50% inhibition observed at the 10 mg/kg dose (plasma concentration ∼480 nM). |
| 性状 | 固体 |
| 颜色 | White to off-white |
| 分子量 | 380.44 |
| 分子式 | C20H24N6O2 |
| CAS No. | 1334673-53-8 |
| 储存方式 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 运输条件 | Room temperature in continental US; may vary elsewhere. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
溶液配制表
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DMSO 中的溶解度 : 66.67 mg/mL (175.24 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。
母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清
以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。
方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。
体内配方配制方法:取 μL DMSO母液,加入 μL Corn oil,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。
© 2026 MolStrong. 保留所有权利。粤ICP备2023004355号
可通过CAS号进行批量搜索,一行一个CAS号