Calactin 是一种可从 Asclepias curassavica L. 中分离得到的糖苷,可激活 caspase-3、caspase-8、caspase-9 并使 ERK 发生磷酸化,还可诱导 DNA 损伤、细胞凋亡 (apoptosis)、PARP 裂解、G2/M 期细胞周期阻滞,改变 Bax/Bcl-2 表达水平,并在白血病细胞中表现出抗增殖作用,因此可用于白血病相关研究。
产品编号: MS-Y30189 CAS No.: 20304-47-6 分子式: C29H40O9 分子量: 532.63
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Calactin 是一种可从 Asclepias curassavica L. 中分离得到的糖苷,可激活 caspase-3、caspase-8、caspase-9 并使 ERK 发生磷酸化,还可诱导 DNA 损伤、细胞凋亡 (apoptosis)、PARP 裂解、G2/M 期细胞周期阻滞,改变 Bax/Bcl-2 表达水平,并在白血病细胞中表现出抗增殖作用,因此可用于白血病相关研究。

生物实验数据

生物活性 Calactin is a glycoside isolated from Asclepias curassavica L. that activates caspase-3, caspase-8, and caspase-9 and induces ERK phosphorylation, and it also induces DNA damage, apoptosis, PARP cleavage, and G2/M cell cycle arrest, alters Bax/Bcl-2 expression levels, and exhibits antiproliferative effects in leukemia cells, making it useful for leukemia-related research.
IC50 & Target

Caspase-3

 

Caspase-8

 

Caspase-9

 

CDK1/cyclinB1

 

Bcl-2

 

Bax

 

体外研究
(In Vitro)

Calactin (0.065-1 μM; 0-24 h) 对人白血病 K562 和 Molt-4 细胞表现出剂量依赖性和时间依赖性的细胞毒性。
Calactin (0.15 μM; 0-24 h) 通过降低 Cyclin B1、Cdk1 和 Cdc25C 的表达,诱导人白血病 K562 和 Molt-4 细胞发生 G2/M 期细胞周期阻滞。
Calactin (0.15 μM; 0-24 h) 可诱导人白血病 K562 和 Molt-4 细胞发生 DNA 损伤。
Calactin (0.15 μM; 0-24 h) 可诱导人白血病 K562 和 Molt-4 细胞发生细胞凋亡,且该凋亡过程不依赖于 caspase-3 的活性。
Calactin (0.15 μM; 0-24 h) 通过内源性和外源性凋亡通路诱导人白血病 K562 和 Molt-4 细胞发生凋亡。
Calactin (0.15 μM; 12 h) 通过 ERK 信号通路上调 K562 和 Molt-4 细胞中的 c-Fos mRNA 表达。

Cell Viability Assay

Cell Line: human leukemia K562 and Molt-4 cells
Concentration: 0.065, 0.125, 0.15, 0.25, 0.5, 1 μM
Incubation Time: 0, 6, 12, 24 h
Result: Reduced cell viability in a dose-dependent and time-dependent manner.
Exhibited a LD50 of 0.161 μM for K562 cells after 12 h treatment.
Exhibited a LD50 of 0.142 μM for Molt-4 cells after 12 h treatment.
Caused progressively decreased cell viability relative to untreated controls when used at 0.15 μM for 6, 12, 18, and 24 h.

Cell Cycle Analysis

Cell Line: human leukemia K562 and Molt-4 cells
Concentration: 0.15 μM
Incubation Time: 0, 6, 12, 24 h
Result: Induced a significant increase in the percentage of K562 cells arrested at the G2/M phase, from 12.8% at 0 h to 34.4% at 24 h.
Reduced the expression levels of Cyclin B1, Cdk1, and Cdc25C in both cell lines over the 24 h treatment period.

Western Blot Analysis

Cell Line: human leukemia K562 and Molt-4 cells
Concentration: 0.15 μM
Incubation Time: 0, 6, 12, 24 h
Result: Increased phosphorylation levels of Chk2 and H2AX in a time-dependent manner.
Showed no change in total Chk2 or H2AX protein expression.

Apoptosis Analysis

Cell Line: human leukemia K562 and Molt-4 cells
Concentration: 0.15 μM
Incubation Time: 0, 6, 12, 24 h
Result: Caused a significant increase in apoptotic cells after treatment.
Did not block calactin-induced phosphatidylserine exposure when cells were pretreated with Z-DEVD-FMK, indicating no reduction in apoptotic cell levels.

Western Blot Analysis

Cell Line: human leukemia K562 and Molt-4 cells
Concentration: 0.15 μM
Incubation Time: 0, 6, 12, 24 h
Result: Induced PARP cleavage in both cell lines over the 24 h treatment period.
Increased levels of active caspase-3, caspase-8, caspase-9, and Bax in both cell lines over the 24 h treatment period.
Decreased levels of procaspase-3, procaspase-8, procaspase-9, and Bcl-2 in both cell lines over the 24 h treatment period.
Increased phosphorylation levels of ERK and Elk-1 in a time-dependent manner, with no change in total ERK or Elk-1 protein expression.

化学信息

分子量 532.63
分子式 C29H40O9
CAS No. 20304-47-6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础