NLRP3-IN-83 是一种选择性且口服有效的 NLRP3 炎症小体激活抑制剂,通过阻断 NLRP3 表现出良好的抑制 IL-1β 活性(IC50 为 1.4 μM)且不依赖 NF-κB 信号传导,对 AIM2 炎症小体通路仅有轻微抑制作用、对 NLRC4 炎症小体无影响,可预防细胞焦亡 (pyroptosis),并在溃疡性结肠炎模型中表现出显著的抗炎功效,可用于炎症性肠病 (IBD) 的研究。
NLRP3-IN-83
产品编号: MS-Y25311 分子式: C17H16N2O2 分子量: 280.32
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

NLRP3-IN-83 是一种选择性且口服有效的 NLRP3 炎症小体激活抑制剂,通过阻断 NLRP3 表现出良好的抑制 IL-1β 活性(IC50 为 1.4 μM)且不依赖 NF-κB 信号传导,对 AIM2 炎症小体通路仅有轻微抑制作用、对 NLRC4 炎症小体无影响,可预防细胞焦亡 (pyroptosis),并在溃疡性结肠炎模型中表现出显著的抗炎功效,可用于炎症性肠病 (IBD) 的研究。

生物实验数据

生物活性 NLRP3-IN-83 is a selective and orally active inhibitor of NLRP3 inflammasome activation that blocks NLRP3 to exhibit potent inhibition of IL-1β activity with an IC50 of 1.4 μM in an NF-κB signaling-independent manner, shows only slight inhibition of the AIM2 inflammasome pathway but no effect on the NLRC4 inflammasome, prevents pyroptosis, and demonstrates significant anti-inflammatory efficacy in a ulcerative colitis model, making it useful for research on inflammatory bowel disease (IBD).
IC50 & Target

NLRP3 inflammasome

 

IL-1β

1.4 μM (IC50)

体外研究
(In Vitro)

NLRP3-IN-83 (Compound 10) (0.625-5 μM, 1-25 h) 在 LPS (MS-X54539) 预处理的 J774A.1 细胞、LPS 预处理的小鼠 BMDMs 细胞 (使用 Nigericin (MS-O56514) 或 SiO2 刺激) 以及 PMA (MS-C34076) 诱导分化的人 THP-1 巨噬细胞模型中,均能显著抑制 IL-1β 的释放,且呈现浓度依赖性。
NLRP3-IN-83 (1-5 μM, 2 h) 显著降低 LPS 预处理的 J774A.1 细胞上清中 caspase-1 (p20) 和 IL-1β 的水平,同时不影响细胞内 pro-caspase-1、pro-IL-1β、NLRP3 和 ASC 的表达水平。
NLRP3-IN-83 (1-5 μM) 通过抑制 GSDMD 的切割和减少 LDH 的释放,能够有效预防 LPS 预处理的 J774A.1 细胞发生焦亡。
NLRP3-IN-83 (2.5-10 μM, 24 h) 对 J774A.1 巨噬细胞和人胚胎肾细胞 HEK-293T 均未显示出显著毒性。
NLRP3-IN-83 (1-5 μM, 2-6 h) 能够抑制 NLRP3 炎症小体的激活,同时对 NF-κB 信号通路没有显著影响。

ELISA Assay

Cell Line: LPS-primed J774A.1 or BMDMs, THP-1 cells
Concentration: 0.625, 1.25 and 2.5 μM (J774A.1 cells); 1,2, and 5 μM (others)
Incubation Time: 1 h and stimulated with Nigericin for 1 h; with SiO2 for 8 h; with PMA for 24 h
Result: Significantly inhibited the release of IL-1β, showing a clear concentration-dependent effect.

Western Blot Analysis

Cell Line: LPS-primed J774A.1 cells
Concentration: LPS-primed J774A.1 cells
Incubation Time: 1 h and stimulated with Nigericin for 1 h
Result: Reduced the production of caspase-1 (p20) and decreased the level of mature IL-1β (p17).
Did not affect the expression levels of pro-caspase-1, pro-IL-1β, NLRP3 and ASC.
Inhibited the self-oligomerization process of NLRP3.
Reduced the binding of NLRP3 to the adaptor protein ASC.
Significantly inhibited the formation of ASC oligomers.
体内研究
(In Vivo)

NLRP3-IN-83 (Compound 10) (10-20 mg/kg, i.g., 每日一次,连续 7 天) 在 DSS (MS-A45736) 诱导的溃疡性结肠炎模型中表现出显著的抗炎效果。

Animal Model: DSS-induced ulcerative colitis model established in 6-8-week-old C57BL/6 mice
Dosage: 10 and 20 mg/kg
Administration: Intragastric administration (i.g.), once daily for 7 days
Result: Significantly improved symptoms of weight loss and rectal bleeding and shortening.
Significantly alleviated the pathological changes in the tissue (such as mucosal ulcers, crypt loss, inflammatory infiltration, etc.).
Dose-dependently reduced IL-1β, down-regulated NLRP3 and caspase-1 expression.

化学信息

分子量 280.32
分子式 C17H16N2O2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础