USP1-IN-9 (Compound 1m) 是一种可逆且非竞争性的泛素化特异性酶 (USP1) 抑制剂,IC50 值为 8.8 nM,是在 ML323 (MS-R11253) 和 KSQ-4279 (MS-B02297) 结构基础上设计合成的吡啶[2,3-d]嘧啶-7(8H)-1 衍生物,对 USP1/UAF 具有良好的抑制作用,并对乳腺癌细胞表现出很强的抗增殖活性,与 PARP 抑制剂奥拉帕利布 (MS-Y92542) 联合使用可增强对 MDA-MB-436/OP 细胞的杀伤作用,有望用于癌症领域的研究。
产品编号: MS-Y21333 CAS No.: 2925548-22-5
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

USP1-IN-9 (Compound 1m) 是一种可逆且非竞争性的泛素化特异性酶 (USP1) 抑制剂,IC50 值为 8.8 nM,是在 ML323 (MS-R11253) 和 KSQ-4279 (MS-B02297) 结构基础上设计合成的吡啶[2,3-d]嘧啶-7(8H)-1 衍生物,对 USP1/UAF 具有良好的抑制作用,并对乳腺癌细胞表现出很强的抗增殖活性,与 PARP 抑制剂奥拉帕利布 (MS-Y92542) 联合使用可增强对 MDA-MB-436/OP 细胞的杀伤作用,有望用于癌症领域的研究。

生物实验数据

生物活性 USP1-IN-9 (Compound 1m) is a reversible and non-competitive ubiquitin-specific protease (USP1) inhibitor with an IC50 value of 8.8 nM, designed and synthesized as a pyrido[2,3-d]pyrimidin-7(8H)-1 derivative based on the structures of ML323 (MS-R11253) and KSQ-4279 (MS-B02297), which exhibits potent inhibition of USP1/UAF and strong antiproliferative activity against breast cancer cells, and its combination with the PARP inhibitor olaparib (MS-Y92542) enhances the killing effect on MDA-MB-436/OP cells, showing promise for research in the field of cancer.
IC50 & Target

USP-1

8.8 nM (IC50)

体外研究
(In Vitro)

USP1-IN-9 (20,100,500 nM,24 h) 在非小细胞肺癌细胞 (NSCLC) 中以剂量依赖性的方式升高了单泛素化增殖细胞核抗原 (Ub-PCNA) 的水平,且 USP1-IN-9 在低至 20 nM 的浓度下也显示出Ub-增殖细胞核抗原的增加。
USP1-IN-9 (0.5 μM,7 days) 对 NSCLC 细胞的集落形成能力有显著的抑制作用。
USP1-IN-9 (1 nM,24 h) 在奥拉帕利布耐药的乳腺癌细胞中单独处理细胞周期轻微阻滞,而奥拉帕利布 (MS-Y92542) 和 USP1-IN-9 联合作用可引起细胞周期阻滞。
USP1-IN-9 (100 nM,7 days) 和奥拉帕利布联合使用能增强奥拉帕利布对乳腺癌细胞的杀伤作用。

Western Blot Analysis

Cell Line: NSCLC cells
Concentration: 20, 100, 500 nM
Incubation Time: 24 h
Result: Elevated the monoubiquitinated PCNA (Ub-PCNA) levels in a dose-dependent manner in NSCLC cells.

Cell Viability Assay

Cell Line: NSCLC cells
Concentration: 0.5 nM
Incubation Time: 7 days
Result: Exhibited a substantial inhibition of the colony forming capacity of breast cancer cells compared to the untreated control.

Cell Cycle Analysis

Cell Line: Breast cancer cells and olaparib-resistant breast cancer cells
Concentration: 1 nM
Incubation Time: 24 h
Result: Resulted in a minor increase in cells within the S phase, whereas the combination of olaparib and USP1-IN-9 led to an accumulation of cells within the S phase and G2/M phase.

Cell Viability Assay

Cell Line: Olaparib-resistant breast cancer cells
Concentration: 100 nM
Incubation Time: 7 days
Result: Alone exhibited a reduction of 30% and did not demonstrate significant cell killing. The inhibition rate of colony formation was further elevated to 50 % combined with USP1-IN-9 and olaparib(100 nM).
体内研究
(In Vivo)

USP1-IN-9 (10 mg/kg,i.g.) 在雄性ICR小鼠中被迅速吸收,并表现出良好的代谢稳定性。
合并列 符号

化学信息

CAS No. 2925548-22-5

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础