AlDeSense AM 是一种可透过细胞膜的 ALDH1A1 选择性荧光报告剂,可被 ALDH1A1 氧化从而消除光诱导电子转移淬灭作用并增强荧光信号,可用于检测具有癌症干细胞特性的细胞、在细胞培养体系和动物模型中监测癌症干细胞的可塑性,以及研究与癌症干细胞相关的癌症,包括慢性髓系白血病、黑色素瘤和乳腺癌。
产品编号: MS-Y20146 CAS No.: 2243148-62-9 分子式: C24H16F2O6 分子量: 438.38
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

AlDeSense AM 是一种可透过细胞膜的 ALDH1A1 选择性荧光报告剂,可被 ALDH1A1 氧化从而消除光诱导电子转移淬灭作用并增强荧光信号,可用于检测具有癌症干细胞特性的细胞、在细胞培养体系和动物模型中监测癌症干细胞的可塑性,以及研究与癌症干细胞相关的癌症,包括慢性髓系白血病、黑色素瘤和乳腺癌。

生物实验数据

生物活性 AlDeSense AM is a cell-permeable ALDH1A1-selective fluorescent reporter that is oxidized by ALDH1A1 to eliminate photoinduced electron transfer quenching and enhance the fluorescent signal, and it can be used to detect cells with cancer stem cell properties, monitor cancer stem cell plasticity in cell culture systems and animal models, and study cancers associated with cancer stem cells, including chronic myeloid leukemia, melanoma, and breast cancer.
体外研究
(In Vitro)

AlDeSense AM (1.5-2 μM; 30 min) 可选择性标记具有活性 ALDH1A1 的人慢性髓系白血病 K562 细胞,这些细胞对应 CD34+/CD38−/CD133+ 白血病干细胞群。
AlDeSense AM (2 μM; 1 h) 可检测 MDA-MB-231 乳腺癌乳腺球 (富集癌症干细胞) 中升高的 ALDH1A1 活性,且随着乳腺球在 36 h 内分化,荧光信号会下降。
AlDeSense AM (2 μM; 1 h) 在富集 CSC 的 B16F0 e-CSC 中的荧光信号比非 CSC 的 B16F0 细胞高 11.3 倍,证实 e-CSC 中 ALDH1A1 活性升高。

Immunofluorescence

Cell Line: K562 human chronic myeloid leukemia cells
Concentration: 1.5 μM (flow cytometry staining); 2 μM (confocal imaging staining)
Incubation Time: 30 min at room temperature (confocal imaging staining)
Result: Identified a population of brightly fluorescent cells corresponding to the CD34+/CD38-/CD133+ leukemic stem cell profile.
Showed a small population of highly fluorescent cells via confocal imaging.
Completely abolished the fluorescence signal after ALDH1A1 siRNA knockdown.

Immunofluorescence

Cell Line: MDA-MB-231 breast cancer mammospheres (CSC-enriched) and differentiating mammospheres
Concentration: 2 μM
Incubation Time: 1 h at room temperature (at 1, 6, 12, 24, 36 h time points during differentiation)
Result: Exhibited 3-fold brighter fluorescence in freshly isolated mammospheres compared to control-stained mammospheres.
Gradually decreased fluorescence signal over 36 h of differentiation.

Immunofluorescence

Cell Line: B16F0 murine melanoma e-CSCs (CSC-enriched via spiral-patterned hydrogel culture) and non-CSCs (standard culture)
Concentration: 2 μM
Incubation Time: 1 h at room temperature
Result: Showed 11.3-fold brighter fluorescence in e-CSCs than in non-CSCs.
Showed 9.0-fold brighter fluorescence in e-CSCs than in e-CSCs stained with control reagent.
Colocalized with the CD271 melanoma stem cell marker in e-CSCs.
体内研究
(In Vivo)

AlDeSense AM (15 μM; 肺灌注; 单次给药) 可在 C57BL/6J 小鼠中选择性检测上皮性癌症干细胞 (e-CSC) 来源的肺转移灶中升高的 ALDH1A1 活性,产生的荧光信号显著高于非癌症干细胞来源的转移灶。

Animal Model: C57BL/6J (female, 6 to 8 weeks old)
Dosage: 15 μM
Administration: lung perfusion; single dose
Result: Produced a mean fluorescence signal of ~1×1011 a.u.
in lungs with e-CSC metastases.
Showed a significantly higher mean fluorescence signal (~1×1011 a.u.) than the ~7×1010 a.u.
measured in lungs with non-CSC metastases.
Demonstrated significantly higher fluorescence in e-CSC metastases than e-CSC metastases treated with Ctrl-AlDeSense AM.

化学信息

分子量 438.38
分子式 C24H16F2O6
CAS No. 2243148-62-9

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础