Etaracizumab

Synonyms: 埃达组单抗; LM609; MEDI-522
Etaracizumab (LM 609) 是一种靶向 αvβ3 整合素的 IgG 单克隆抗体,旨在通过 NK 细胞介导的细胞毒作用靶向 αvβ3+ 癌细胞,其在空间上阻碍大配体进入 RGD 结合位点但不阻断该位点,可在体外降低 p-Akt,降低癌细胞的增殖和侵袭能力,诱导肿瘤细胞凋亡,并抑制 αvβ3 介导的细胞粘附、内皮细胞迁移和破骨细胞介导的骨吸收,可用于卵巢癌、转移性黑色素瘤以及晚期实体瘤等癌症的抗肿瘤研究,推荐同型对照为 Human IgG1 kappa, Isotype Control (MS-E04981)。
产品编号: MS-X98581 纯度: 99.81% CAS No.: 892553-42-3
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

Etaracizumab (LM 609) 是一种靶向 αvβ3 整合素的 IgG 单克隆抗体,旨在通过 NK 细胞介导的细胞毒作用靶向 αvβ3+ 癌细胞,其在空间上阻碍大配体进入 RGD 结合位点但不阻断该位点,可在体外降低 p-Akt,降低癌细胞的增殖和侵袭能力,诱导肿瘤细胞凋亡,并抑制 αvβ3 介导的细胞粘附、内皮细胞迁移和破骨细胞介导的骨吸收,可用于卵巢癌、转移性黑色素瘤以及晚期实体瘤等癌症的抗肿瘤研究,推荐同型对照为 Human IgG1 kappa, Isotype Control (MS-E04981)。

生物实验数据

生物活性 Etaracizumab (LM 609) is an IgG monoclonal antibody against αvβ3 integrin that is designed to target αvβ3+ cancer cells through NK cell-mediated cytotoxicity, sterically hinders large ligand access to the RGD binding site without blocking it, reduces p-Akt in vitro, decreases cancer cell proliferation and invasion, induces tumor cell apoptosis, and inhibits αvβ3-mediated cell adhesion, endothelial cell migration, and osteoclast-mediated bone resorption, and can be used for antitumor research in cancers such as ovarian cancer, metastatic melanoma, and advanced solid tumors, with the recommended isotype control being Human IgG1 kappa, Isotype Control (MS-E04981).
IC50 & Target

Integrin aVb3

体外研究
(In Vitro)

Etaracizumab (24 小时) 可使 SKOV3ip1 细胞中的 p-Akt 水平降低 39%。
Etaracizumab (100 μg/mL, 5 天) 在 Vitronectin (MS-M91795) 涂层存在的情况下,可显著抑制卵巢癌细胞的生长。
Etaracizumab (1-10 μg/mL, 24 小时) 可显著抑制卵巢癌细胞的侵袭。

体内研究
(In Vivo)

Etaracizumab (10 mg/kg,腹腔注射,每周两次) 可抑制卵巢癌原位小鼠模型中的肿瘤生长。

Animal Model: Orthotopic mouse model of advanced ovarian cancer in three cell lines (SKOV3ip1, A2780ip2, and Hey8)
Dosage: 10 mg/kg
Administration: Intraperitoneal injection (i.p.), twice per week
Result: Reduced tumor growth by 48.8% compared to IgG control in the SKOV3ip1 model.
Significantly reduced tumor growth by 83.3% when combined with Paclitaxel (HY-B0015) compared to control IgG alone in the SKOV3ip1 model.
Significantly reduced tumor growth by 86.4% when combined with Paclitaxel compared to control in the A2780ip2 model.
Significantly reduced tumor weight by 35.6% in the HeyA8 model.
Clinical Trial
NCT NumberSponsorConditionStart DatePhase
NCT00684996National Cancer Institute (NCI)
Recurrent Renal Cell Cancer|Renal Cell Carcinoma|Stage III Renal Cell Cancer|Stage IV Renal Cell Cancer
2008-06PHASE1|PHASE2
NCT00027729Memorial Sloan Kettering Cancer Center|National Cancer Institute (NCI)
Colorectal Cancer
2001-06PHASE1|PHASE2
NCT00049712University of Wisconsin, Madison|National Cancer Institute (NCI)
Lymphoma|Small Intestine Cancer|Unspecified Adult Solid Tumor, Protocol Specific
2002-10PHASE1
性状 液体
颜色 Colorless to light yellow

化学信息

CAS No. 892553-42-3
别名 埃达组单抗; LM609; MEDI-522

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Shipping with dry ice.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础