| 生物活性 | Methylthiouracil is an antithyroid agent that inhibits the production of TNF-α and IL-6 as well as the activation of NF-κB and ERK1/2. | ||||
| IC50 & Target |
|
||||
| 体外研究 (In Vitro) |
HUVECs are treated with various concentrations of MTU (0-20 μM) for 6 h after the addition of LPS (100 ng/mL) for 4 h. MTU inhibits LPS-mediated hyperpermeability in endothelial cells, with the optimal effect occurring at a concentration above 5 μM. The effects of MTU are examined on HUVEC actin cytoskeletal arrangement by immunofluorescence staining of HUVEC monolayers with F-actin labeled fluorescein phalloidin. Control HUVECs exhibit a random distribution of F-actin throughout the cells, with some localization of actin filament bundles at the cell boundaries. Barrier disruption by LPS (100 ng/mL) is manifested by the formation of paracellular gaps in HUVECs. In addition, post-treatment with MTU (10 or 20 μM) results in inhibited formation of LPS-induced paracellular gaps with the formation of dense F-actin rings. To test the cytotoxicity of MTU, cellular viability assays are performed in HUVECs treated with MTU for 24 h. At concentrations up to 20 μM, MTU does not affect cell viability. |
||||
| 体内研究 (In Vivo) |
注意:
诱导神经系统缺陷
致病原理
Methylthiouracil 是一种抗甲状腺药物,通过抑制甲状腺功能,进而破坏中枢神经系统。
具体造模方法:
大鼠:白化病大鼠 • 雄性&雌性
给药方式:0.05-0.2 mL • 皮下注射 • 每日一次,给药方法详情见说明
Note
Methylthiouracil 给药方式:Methylthiouracil 悬浮于 2% 海藻酸钠 (MS-Z15789) 溶液,浓度为 4%。
(1). 出生后 0-10 天,皮下注射 0.05 mL 悬液; (2). 出生后 10-20 天,皮下注射 0.1 mL 悬液; (3). 出生后 20-24 天,皮下注射 0.2 mL 悬液。 造模成功指标
表型观测:大鼠体重下降,大脑重量减轻,生长速率减缓,对外界刺激的反应能力降低。
组织学变化:大鼠大脑皮层锥体细胞体积减小,数量增多,大脑皮层神经元之间存在的支持性或结构性物质 (细胞间物质) 在大鼠发育过程中增加减少。 相关产品:Sodium alginate (Viscosity 200±20mpa.s) (MS-Z15789)
|
||||
| 性状 | 固体 | ||||
| 颜色 | White to off-white |
| 分子量 | 142.18 |
| 分子式 | C5H6N2Os |
| CAS No. | 56-04-2 |
| 别名 | 甲硫氧嘧啶; MTU |
| 体内实验配方 | 10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2.00 mg/mL (14.07 mM), Sonication is recommended. 请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 储存方式 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 运输条件 | Room temperature in continental US; may vary elsewhere. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
溶液配制表
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DMSO 中的溶解度 : ≥ 50 mg/mL (351.67 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO) * "≥" means soluble, but saturation unknown.
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。
母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清
以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。
方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。