| 生物活性 | BMS-066 is an inhibitor of IKKβ/Tyk2 with IC50 values of 9 nM and 72 nM, respectively. |
| IC50 & Target | IKKβ:9 nM, TYK2:72 nM |
| 体外研究 (In Vitro) |
BMS-066 is shown to inhibit IKKβ-catalyzed phosphorylation of IKKβ in vitro with an IC50 of 9 nM and is more than 500-fold selective for IKKβ over the closely related IKKα. To understand the selectivity on a more comprehensive scale, BMS-066 is assayed against 155 additional kinases at 10 μM, and only six of these kinases are inhibited more than 75%. This indicates that BMS-066 is more than 400-fold selective for IKKβ over more than 95% of the kinases tested. For the six kinases showing more than 75% inhibition at 10 μM, IC50 values are determined in dose-response assays and BMS-066 is shown to be more than 30-fold selective against even the next most potently inhibits kinase (Brk). BMS-066 inhibits LPS-stimulated cytokine production in human peripheral blood mononuclear cells, both at the protein and message level, with IC50 values of approximately 200 nM against these endpoints. BMS-066 inhibits the IKKβ-catalyzed phosphorylation of IkBα in LPS stimulated cells with a similar IC50 value. BMS-066 shows IC50 values of 72 and 1020 nM against the Tyk2 pseudokinase domain probe displacement and IL-23-stimulated reporter assays, respectively. |
| 体内研究 (In Vivo) |
Once daily oral doses of 5 and 10 mg/kg starting at the time of adjuvant injection on day 1 significantly reduces paw swelling compared with vehicle-treated rats at the end of the study, with the high dose showing nearly complete suppression. The talocrural (ankle) joint space is narrowed. Inflammatory exudates containing neutrophils and cell debris are also evident within the joint space. The joints from animals receiving 10 mg/kg BMS-066 are normal or show minimal changes in both inflammation and bone resorption. Clear reduction of inflammation is also evident in the low dose of BMS-066 (5 mg/kg) and the bone resorption seems to be more focal and less severe compared with the control. Microcomputed tomography of the hind limbs also show that BMS-066 provides a dose-dependent protection against the pitting, loss of bone mass, woven porous bone, and fusion of the small bones evident in the rats. Bone density measurements also show a clear dose-dependent benefit of treatment with BMS-066. Serum drug level measurements in satellite animals on the first day of dosing show that a single dose provides coverage for approximately 3 h (6 h daily with twice daily dosing) of the mouse whole-blood IC50 value against LPS-induced TNF-α. It is also showed that IKKβ inhibitors suppress TNF-α and IL-1β production within these tissues in experimental arthritis model. |
| 性状 | 固体 |
| 颜色 | Off-white to light yellow |
| 分子量 | 379.42 |
| 分子式 | C19H21N7O2 |
| CAS No. | 914946-88-6 |
| 储存方式 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 运输条件 | Room temperature in continental US; may vary elsewhere. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
溶液配制表
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DMSO 中的溶解度 : 100 mg/mL (263.56 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。
母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清
以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。
方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。