Valsartan methyl ester

Synonyms: CGP 48933 methyl ester
Valsartan (CGP 48933) methyl ester 是 Valsartan (MS-I15777) 的甲酯衍生物,而 Valsartan 是一种选择性且口服有效的血管紧张素 II 1 型 (AT1) 受体阻滞剂 (ARB),具有强效的抗高血压和心保护作用,它通过竞争性结合 AT1 受体、抑制血管紧张素 II 与 AT1 受体的结合,从而阻断血管紧张素 II 介导的血管收缩、钠潴留和心肌肥厚信号通路,并可降低 L-NAME 诱导的高血压大鼠的收缩压,因此可用于动脉高血压、高血压性心脏病和心力衰竭的研究。
产品编号: MS-X68618 纯度: 99.39% CAS No.: 137863-17-3 分子式: C25H31N5O3 分子量: 449.55
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价
(0.1 - 0.2mg)
询价
询价

产品描述

Valsartan (CGP 48933) methyl ester 是 Valsartan (MS-I15777) 的甲酯衍生物,而 Valsartan 是一种选择性且口服有效的血管紧张素 II 1 型 (AT1) 受体阻滞剂 (ARB),具有强效的抗高血压和心保护作用,它通过竞争性结合 AT1 受体、抑制血管紧张素 II 与 AT1 受体的结合,从而阻断血管紧张素 II 介导的血管收缩、钠潴留和心肌肥厚信号通路,并可降低 L-NAME 诱导的高血压大鼠的收缩压,因此可用于动脉高血压、高血压性心脏病和心力衰竭的研究。

生物实验数据

生物活性 Valsartan (CGP 48933) methyl ester is the methyl ester derivative of Valsartan (MS-I15777), a selective and orally active angiotensin II type 1 (AT1) receptor blocker (ARB) with potent antihypertensive and cardioprotective effects that competitively binds to the AT1 receptor and inhibits the binding of angiotensin II to the AT1 receptor, thereby blocking angiotensin II-mediated vasoconstriction, sodium retention, and cardiac hypertrophy signaling pathways, reduces systolic blood pressure in L-NAME-induced hypertensive rats, and can be used for research on arterial hypertension, hypertensive heart disease, and heart failure.
IC50 & Target Ang II receptor:0.06μM
体内研究
(In Vivo)

Valsartan methyl ester (68 mg/kg,口服给药,每日,溶于饮用水中,4 周) 显著降低 L-NAME 诱导的高血压成年雄性 Wistar 大鼠的收缩压。

Animal Model: Adult (12-week-old) male Wistar rats were administered Nω-nitro-L-arginine methyl ester (L-NAME) at a dose of 40 mg/kg/day dissolved in drinking water for 4 weeks to induce hypertension and hypertensive heart disease
Dosage: 68 mg/kg
Administration: p.o., daily, dissolved in drinking water, 4 weeks
Result: Achieved systolic blood pressure (SBP) reduction.
Showed no significant changes in body weight.
Reduced left ventricular weight (LVW).
Appeared increases in left ventricular ejection fraction (LVEF) and left ventricular fractional shortening (LVFS).
Reduced hydroxyproline concentration in insoluble collagen and total collagen.
Reduced the volume of type I collagen and type III collagen.
Reduced serum prolactin level and serum prolactin receptor level.
Showed decreases in E/A ratio, deceleration time (DecT), and isovolumic relaxation time.
性状 固体
颜色 White to off-white

化学信息

分子量 449.55
分子式 C25H31N5O3
CAS No. 137863-17-3
别名 CGP 48933 methyl ester

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 175 mg/mL (389.28 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.2244 mL11.1222 mL22.2445 mL55.6112 mL
5 mM0.4449 mL2.2244 mL4.4489 mL11.1222 mL
10 mM0.2224 mL1.1122 mL2.2244 mL5.5611 mL
15 mM0.1483 mL0.7415 mL1.4830 mL3.7074 mL
20 mM0.1112 mL0.5561 mL1.1122 mL2.7806 mL
25 mM0.0890 mL0.4449 mL0.8898 mL2.2244 mL
30 mM0.0741 mL0.3707 mL0.7415 mL1.8537 mL
40 mM0.0556 mL0.2781 mL0.5561 mL1.3903 mL
50 mM0.0445 mL0.2224 mL0.4449 mL1.1122 mL
60 mM0.0371 mL0.1854 mL0.3707 mL0.9269 mL
80 mM0.0278 mL0.1390 mL0.2781 mL0.6951 mL
100 mM0.0222 mL0.1112 mL0.2224 mL0.5561 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础