STAT3-IN-11 (7a) 是一种选择性 STAT3 抑制剂,可抑制 STAT3 pTyr705 位点的磷酸化,抑制下游基因 Survivin 和 Mcl-1 的磷酸化,且不影响上游酪氨酸激酶 Src 和 JAK2 及 p-STAT1 的表达,并能诱导癌细胞凋亡,有望用于 STAT3 抑制剂和抗肿瘤试剂的发现。
产品编号: MS-X59341 纯度: 98.29% CAS No.: 2503096-50-0 分子式: C20H17NO4 分子量: 335.35
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

STAT3-IN-11 (7a) 是一种选择性 STAT3 抑制剂,可抑制 STAT3 pTyr705 位点的磷酸化,抑制下游基因 Survivin 和 Mcl-1 的磷酸化,且不影响上游酪氨酸激酶 Src 和 JAK2 及 p-STAT1 的表达,并能诱导癌细胞凋亡,有望用于 STAT3 抑制剂和抗肿瘤试剂的发现。

生物实验数据

生物活性 STAT3-IN-11 (7a) is a selective STAT3 inhibitor that inhibits phosphorylation at the STAT3 pTyr705 site, suppresses phosphorylation of the downstream genes Survivin and Mcl-1 without affecting the expression of the upstream tyrosine kinases Src and JAK2 or p-STAT1, and induces cancer cell apoptosis, showing promise for the discovery of STAT3 inhibitors and antitumor agents.
IC50 & Target

IC50: 1.93 μM (SIP), ≥ 30 μM (SphK1), ≈ 30 μM (SphK2).

体外研究
(In Vitro)

STAT3-IN-11 (20 μM, 48 h) has 97.86% inhibitory effect on MDA-MB-231 cells.
STAT3-IN-11 (0-30 μM, 48 h) inhibits several cancer cells with IC50 values of 6.01 μM (MDA-MB-231), 7.02μM (HepG2, A549), and normal human cells with IC50 values of 26.54 μM (MDA-MB-10A), 26.69 μM (PBMCs), 12.52 μM (HFL-1).
STAT3-IN-11 (2.5-10 μM, 6 h) inhibits the phosphorylation of STAT3 (stimulated by IL-6 in MDA-MB-231) at site pTyr705 in a dose-dependent manner.
STAT3-IN-11 (2.5-10 μM, 6 h) inhibits the expression of the downstream gene (Survivin and Mcl-1) of STAT3 in a concentration-dependent manner.
STAT3-IN-11 (2.5-10 μM, 6 h) has no effects on the typical upstream kinases of STAT3 such as p-JAK2 and p-Src and the phosphorylation of STAT1 (a STAT isoform).
STAT3-IN-11 (2.5-10 μM, 48 h) can induce cell apoptosis in a dose-manner.

Cell Cytotoxicity Assay

Cell Line: MDA-MB-231 cells
Concentration: 20 μM
Incubation Time: 48 hours
Result: The antiproliferative activity reached 97.86%.

Cell Cytotoxicity Assay

Cell Line: MDA-MB231, A549, MDA-MB-10A, PBMCs and HFL-1 cells
Concentration: 20 μM
Incubation Time: 48 hours
Result: Inhibited with IC50 values of 6.01, 7.20, 7.02, 26.54, 25.69 and 12.52 μM for MDA-MB231, A549, MDA-MB-10A, PBMCs and HFL-1 cells, respectively.

Western Blot Analysis

Cell Line: MDA-MB-231 cells
Concentration: 2.5,5 and 10 μM
Incubation Time: 6 hours
Result: Decrease the level of p-STAT3 at site pTyr705 in a concentration dependent manner.

Western Blot Analysis

Cell Line: MDA-MB-231 cells
Concentration: 2.5,5 and 10 μM
Incubation Time: 6 hours
Result: Down-regulated the level of STAT3 downstream genes.

Apoptosis Analysis

Cell Line: MDA-MB-231 cells
Concentration: 5, 10 and 15 μM
Incubation Time: 48 hours
Result: The percentage of apoptotic cells was 24.4% at a concentration of 15 μM.
性状 固体
颜色 Yellow to orange

化学信息

分子量 335.35
分子式 C20H17NO4
CAS No. 2503096-50-0

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (298.20 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.9820 mL14.9098 mL29.8196 mL74.5490 mL
5 mM0.5964 mL2.9820 mL5.9639 mL14.9098 mL
10 mM0.2982 mL1.4910 mL2.9820 mL7.4549 mL
15 mM0.1988 mL0.9940 mL1.9880 mL4.9699 mL
20 mM0.1491 mL0.7455 mL1.4910 mL3.7274 mL
25 mM0.1193 mL0.5964 mL1.1928 mL2.9820 mL
30 mM0.0994 mL0.4970 mL0.9940 mL2.4850 mL
40 mM0.0745 mL0.3727 mL0.7455 mL1.8637 mL
50 mM0.0596 mL0.2982 mL0.5964 mL1.4910 mL
60 mM0.0497 mL0.2485 mL0.4970 mL1.2425 mL
80 mM0.0373 mL0.1864 mL0.3727 mL0.9319 mL
100 mM0.0298 mL0.1491 mL0.2982 mL0.7455 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础