YM-202074 是一种高亲和力、选择性的变构代谢型谷氨酸受体1型 (mGluR1) 拮抗剂,其结合大鼠 mGluR1 变构位点的 Ki 值为 4.8 nM,也能抑制 mGluR1 介导的大鼠小脑颗粒细胞肌醇磷酸产生,IC50 值为 8.6 nM,并在短暂性大脑中动脉 (tMCA) 闭塞大鼠模型中具有强效的神经保护作用。
产品编号: MS-X52828 CAS No.: 299900-83-7 分子式: C22H30N4O2S 分子量: 414.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

YM-202074 是一种高亲和力、选择性的变构代谢型谷氨酸受体1型 (mGluR1) 拮抗剂,其结合大鼠 mGluR1 变构位点的 Ki 值为 4.8 nM,也能抑制 mGluR1 介导的大鼠小脑颗粒细胞肌醇磷酸产生,IC50 值为 8.6 nM,并在短暂性大脑中动脉 (tMCA) 闭塞大鼠模型中具有强效的神经保护作用。

生物实验数据

生物活性 YM-202074 is a high-affinity, selective allosteric metabotropic glutamate receptor 1 (mGluR1) antagonist that binds to the allosteric site of rat mGluR1 with a Ki value of 4.8 nM, inhibits mGluR1-mediated inositol phosphate production in rat cerebellar granule cells with an IC50 value of 8.6 nM, and exhibits potent neuroprotective effects in a rat model of transient middle cerebral artery (tMCA) occlusion.
IC50 & Target

rat mGluR1

4.8 nM (Ki)

体外研究
(In Vitro)

YM-202074 显著抑制大鼠小脑颗粒细胞中 mGluR1 介导的肌醇磷酸生成,IC50 为 8.6 nM。
YM-202074 显示出对其他 mGluR 的特异性选择性,例如在 HEK 细胞和 CHO 细胞中,对 mGluR2、mGluR3、mGluR4a、mGluR6 或 mGluR7b (≤ 10 μM) 既无激动剂也无拮抗剂活性,但对 mGluR5 (10 μM) 具有反向激动剂活性。
YM-202074 对离子型谷氨酸受体 (≤ 10 μM) 没有亲和力,对少数受体有中等程度的脱靶活性,例如对肾上腺素 α2C 受体、多巴胺转运体、乙酰胆碱 M2/M4 受体、sigma2 受体、钠通道位点 2 的抑制率 均 >60%,对其他 74 个位点的抑制率 ≤ 50%。

体内研究
(In Vivo)

YM-202074 (静脉输注,5 mg/kg/h 输注 8 小时,或 20 mg/kg/h 输注 0.5 小时,随后 5 mg/kg/h 输注 7.5 小时) 可迅速到达脑部,在 12 分钟内达到约 0.3 μM 的游离浓度,并以 20 mg/kg/h 输注 0.5 小时的负荷剂量输注,在 1.5 小时内达到稳态。
YM-202074 (静脉输注,10-20 mg/kg/h 输注 0.5 小时,随后 2.5-5 mg/kg/h 输注 0.5-6 小时) 在 tMCA 闭塞大鼠模型中可提供不受低温等非特异性因素影响的神经保护作用,且未观察到显著的生理变化。
YM-202074 (静脉输注,10-20 mg/kg/h,持续 0.5 小时,随后 2.5-5 mg/kg/h,持续 23.5 小时) 剂量依赖性地改善 tMCA 闭塞大鼠模型中的神经功能缺损,并减少半球和皮质的梗死体积,高剂量时疗效更佳。
YM-202074 (静脉输注,20 mg/kg/h,持续 0.5 小时,随后在 tMCA 闭塞后 2 或 3 小时至 24 小时以 5 mg/kg/h 输注) 在 tMCA 闭塞大鼠模型中缺血发生 2 小时后给药,能显著维持神经保护作用。
YM-202074 (静脉输注,20 mg/kg/h,持续 0.5 小时,随后在 tMCA 闭塞后 2 小时至 24 小时以 5 mg/kg/h 输注) 在 tMCA 闭塞大鼠模型中在缺血发生后 1 周给药,显著维持神经功能缺损的改善和梗死体积的减少以及大鼠体重的增加。

Animal Model: Male SD rats firstly given a left jugular vein cannulation at the dorsal neck with chloral hydrate anesthesia (i.p., 350 mg/kg,), and 24 h later, a 3-0 poly-L-lysine-coated suture was advanced about 17 mm intracranially from the common carotid artery bifurcation via the right and internal external carotid artery with halothane (0.5-1.5%) for 3 h.
Dosage: 10 or 20 mg/kg/h (loading infusion), 2.5 or 5 mg/kg/h (maintenance infusion)
Administration: i.v. infusion, loading infusion for 0.5 h followed by maintenance infusion for 23.5 h
Result: Dose-dependently improved neurological deficit and reduces the infarct volume in both the hemisphere and cortex in tMCA occlusion rat models.
Significantly reduced infarct volume in the hemisphere and the cortex by 55% and 70%, and improved neurological scores in tMCA occlusion rat models with 20 mg/kg/h for 0.5 h followed by 5 mg/kg/h for 23.5 h.
Animal Model: Male SD rats firstly given a left jugular vein cannulation at the dorsal neck with chloral hydrate Anesthesia (i.p., 350 mg/kg,), and24 h later, a 3-0 poly-L-lysine-coated suture was advanced about 17 mm intracranially from the common carotid artery bifurcation via the right and internal external carotid artery with halothane (0.5–1.5%) for 3 h.
Dosage: 20 mg/kg/h (loading infusion), 5 mg/kg/h (maintenance infusion)
Administration: i.v. infusion, loading infusion for 0.5 h followed by maintenance infusion from 2 or 3 h to 24 h after tMCA occlusion, and then measured infarct volume of ischemic damage.
Result: Significantly maintained neuroprotection even when given 2 h after the onset of ischemia in tMCA occlusion rat models, with the degree of protection against hemisphere and subcortical infarct volume by 34% and 37%, respectively.
Notably sustained the improvement of neurological deficit and the reduction of infarct volume (especially cortex by 39%) as well as increase of rat body weight for 1 week following the onset of ischemia in tMCA occlusion rat models.

化学信息

分子量 414.56
分子式 C22H30N4O2S
CAS No. 299900-83-7

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础