Versicolorin A 是 Aflatoxin B1 (MS-I39014) 的生物合成前体,可诱导 p53 磷酸化,激活芳香烃受体 AhR 并显著诱导 CYP1A1 表达,发挥遗传毒性和细胞毒性作用,并通过促进黄曲霉毒素 B1 的 CYP450 介导的生物活化增强其在细胞中的遗传毒性,可用于结直肠癌和肝细胞癌的相关研究。
产品编号: MS-X45433 CAS No.: 6807-96-1 分子式: C18H10O7 分子量: 338.27
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Versicolorin A 是 Aflatoxin B1 (MS-I39014) 的生物合成前体,可诱导 p53 磷酸化,激活芳香烃受体 AhR 并显著诱导 CYP1A1 表达,发挥遗传毒性和细胞毒性作用,并通过促进黄曲霉毒素 B1 的 CYP450 介导的生物活化增强其在细胞中的遗传毒性,可用于结直肠癌和肝细胞癌的相关研究。

生物实验数据

生物活性 Versicolorin A is a biosynthetic precursor of Aflatoxin B1 (MS-I39014) that induces p53 phosphorylation, activates the aryl hydrocarbon receptor (AhR) and significantly induces CYP1A1 expression, exerts genotoxic and cytotoxic effects, and enhances the genotoxicity of Aflatoxin B1 in cells by promoting its CYP450-mediated bioactivation, making it useful for research related to colorectal cancer and hepatocellular carcinoma.
IC50 & Target

CYP1A1

 

体外研究
(In Vitro)

Versicolorin A (0.1-30 μM; 24-48 h) 在野生型 HepG2 细胞中表现出与黄曲霉毒素 B1 相似的细胞毒活性,孵育 48 h 后会引发显著的浓度依赖性细胞毒性 (10 μM 时效应最强),但孵育 24 h 后细胞毒性未超过 20% 的阈值。
Versicolorin A (0.1-10 μM; 24 h) 对野生型 HepG2 细胞具有遗传毒性,可诱导呈浓度依赖性的 H2AX 磷酸化,孵育 24 h 后的最低观察效应浓度 (LOEC) 为 10 μM。
Versicolorin A (0.01-10 μM; 24 h) 可在 HepG2-p53 CALUX 细胞中诱导呈浓度依赖性的 p53 转录活性,孵育 24 h 后的最低观测效应浓度 (LOEC) 为 1 μM,且诱导峰值水平与黄曲霉毒素 B1 相近。
Versicolorin A (1 μM; 24 h) 可提高野生型 HepG2 细胞中磷酸化 p53 (Ser15) 的水平,孵育 24 小时后即可观察到该效应,但该效应无统计学意义。
Versicolorin A (0.001-10 μM; 4 h) 可激活 DRhuman CALUX 细胞中的芳香烃受体,孵育 4 h 后的 EC50 为 0.9 μM,LOEC 为 0.2 μM,其诱导的最大转录激活水平可达 2,3,7,8-TCDD 诱导水平的 52%。
Versicolorin A (1 μM; 24 h) 在野生型 HepG2 细胞中孵育 24 h 后可显著诱导 CYP1A1 mRNA 转录水平升高 2.4 倍,但对 CYP1A2 或 CYP3A4 的表达无显著影响。
Versicolorin A (1 μM) 可增强黄曲霉毒素 B1 对野生型 HepG2 细胞的遗传毒性,联合暴露 24 小时后其引发的 H2AX 磷酸化水平显著高于单独处理组,在黄曲霉毒素 B1 浓度较低时 (0.1 μM to 3 μM) 该效应尤为明显。

Cell Cytotoxicity Assay

Cell Line: wild-type HepG2 human liver hepatocellular carcinoma cells
Concentration: 0.1-30 μM
Incubation Time: 24 h; 48 h
Result: Caused no decrease in cell viability greater than the 20% threshold after 24 h of incubation.
Caused a dose-dependent decrease in cell viability after 48 h of incubation, with concentrations above 1 μM reducing viability and maximal cytotoxicity observed at 10 μM (viability reduced to ~35% compared to DMSO control).
Induced an unspecific increase in cell viability at 30 μM after 48 h.

Western Blot Analysis

Cell Line: wild-type HepG2 human liver hepatocellular carcinoma cells
Concentration: 1 μM
Incubation Time: 24 h
Result: Increased the relative abundance of phosphorylated p53 (Ser15) compared to DMSO control, though this increase was not statistically significant (p=0.1762).
Showed lower induction than that caused by 1 μM aflatoxin B1.

Real Time qPCR

Cell Line: wild-type HepG2 human liver hepatocellular carcinoma cells
Concentration: 1 μM
Incubation Time: 24 h
Result: Significantly induced CYP1A1 mRNA expression by 2.4-fold relative to DMSO control.
Caused no significant induction of CYP1A2 or CYP3A4 mRNA.

化学信息

分子量 338.27
分子式 C18H10O7
CAS No. 6807-96-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础