PARP1/ERK IN-1 是一种双重 PARP1/ERK 抑制剂,对 PARP1 的 IC50 为 0.9 nM,对 ERK2 的 IC50 为 1.8 nM,可抑制多种癌细胞系的增殖与迁移、诱导细胞凋亡 (apoptosis) 和 DNA 损伤,并在结直肠癌小鼠模型中抑制肿瘤生长、降低 Ki‑67、BRCA1 与 Rad51 表达,可用于结直肠癌、三阴性乳腺癌和胰腺癌的研究。
PARP1/ERK IN-1
产品编号: MS-X34119 分子式: C23H19FN8O2 分子量: 458.45
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PARP1/ERK IN-1 是一种双重 PARP1/ERK 抑制剂,对 PARP1 的 IC50 为 0.9 nM,对 ERK2 的 IC50 为 1.8 nM,可抑制多种癌细胞系的增殖与迁移、诱导细胞凋亡 (apoptosis) 和 DNA 损伤,并在结直肠癌小鼠模型中抑制肿瘤生长、降低 Ki‑67、BRCA1 与 Rad51 表达,可用于结直肠癌、三阴性乳腺癌和胰腺癌的研究。

生物实验数据

生物活性 PARP1/ERK IN-1 is a dual PARP1/ERK inhibitor with an IC50 of 0.9 nM for PARP1 and 1.8 nM for ERK2 that inhibits the proliferation and migration of multiple cancer cell lines, induces apoptosis and DNA damage, suppresses tumor growth and reduces Ki‑67, BRCA1, and Rad51 expression in a mouse model of colorectal cancer, and can be used for research on colorectal cancer, triple-negative breast cancer, and pancreatic cancer.
IC50 & Target

ERK2

1.8 nM (IC50)

PARP1

0.9 nM (IC50)

体外研究
(In Vitro)

PARP1/ERK IN-1 (I-16) (7 days) 可抑制多种癌细胞系的增殖,HCT116 (IC50 = 0.41 μM)、HT29 (IC50 = 2.58 μM)、CFPAC-1 (IC50 = 5.51 μM)、W1990 (IC50 = 2.13 μM),且对正常 MCF-10A 和 AML-12 细胞的毒性极低。
PARP1/ERK IN-1 (0.25-1 μM; 7 days) 可浓度依赖性地降低 PARP1 和 p-ERK1/2 蛋白水平,并损伤 HCT116 细胞中的 DNA 修复通路。
PARP1/ERK IN-1 (100 μM; 6-8 h) 可直接结合 HCT116 细胞裂解物中的 PARP1 和 ERK 蛋白,提高它们的热稳定性。
PARP1/ERK IN-1 (0.25-1 μM; 0-14 days) 可抑制 HCT116 细胞的长期集落形成,抑制 HCT116 细胞的定向迁移。
PARP1/ERK IN-1 (0.25-1 μM; 7 days) 呈剂量依赖性诱导 HCT116 细胞凋亡,将细胞阻滞于细胞周期的 G2/M 期,诱导显著的 DNA 损伤。

Western Blot Analysis

Cell Line: HCT116
Concentration: 0.25, 0.5, 1 μM
Incubation Time: 7 days
Result: Concentration-dependently reduced PARP1, p-ERK1/2, p-p90RSK1, BRCA1, and Rad51 protein levels, while increasing γH2AX protein levels.

Cell Proliferation Assay

Cell Line: HCT116
Concentration: 0.25, 0.5, 1 μM
Incubation Time: 14 days
Result: Markedly inhibited colony formation in a dose-dependent manner, with greater potency than Olaparib, BVD-523, or their combination.

Cell Migration Assay

Cell Line: HCT116
Concentration: 0.25, 0.5, 1 μM
Incubation Time: Up to 48 h;12, 24, or 48 h
Result: Concentration-dependently inhibited wound closure, with effects at 1 μM surpassing those of the Olaparib and BVD-523 combination.
Potently suppressed cell migration in a time- and dose-dependent manner, with stronger efficacy than Olaparib or BVD-523 alone at tested concentrations in a Transwell model.

Apoptosis Analysis

Cell Line: HCT116
Concentration: 0.25, 0.5, 1 μM
Incubation Time: 7 days
Result: Induced dose-dependent increase in apoptosis, with an apoptosis rate of 39.67% at 1 μM, significantly higher than the Olaparib-BVD-523 combination.

Cell Cycle Analysis

Cell Line: HCT116
Concentration: 0.25, 0.5, 1 μM
Incubation Time: 7 days
Result: Arrested cells in the G2/M phase in a dose-dependent manner, with 1 μM treatment resulting in 30.25% of cells in G2/M phase.
体内研究
(In Vivo)

PARP1/ERK IN-1 (5-20 mg/kg;腹腔注射;每日一次;21 天) 在 HCT116 异种移植小鼠模型中呈剂量依赖性抑制结直肠癌肿瘤生长。

Animal Model: BALB/c nude (male, 6-week-old, 18-22 g, HCT116 cell xenograft)
Dosage: 5 mg/kg; 10 mg/kg; 20 mg/kg
Administration: i.p.; daily; 21 days
Result: Achieved tumor growth inhibition (TGI) rate of 57.7% at 20 mg/kg, superior to Olaparib (50 mg/kg, TGI=37.0%) and BVD-523 (5 mg/kg, TGI=45.8%), and comparable to Olaparib + BVD-523 combination (TGI=54.2%).
Showed no significant body weight loss across all treatment groups.
Reduced Ki-67 expression in 20 mg/kg group tumor tissues, indicating inhibited tumor cell proliferation.
Reduced BRCA1 and Rad51 expression in 20 mg/kg group tumor tissues.
Markedly reduced PARP1 and p-ERK1/2 fluorescence signal intensity in 20 mg/kg group tumor tissues.

化学信息

分子量 458.45
分子式 C23H19FN8O2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础