WNY0824

Synonyms: PLK1/BRD4-IN-1
WNY0824 (PLK1/BRD4-IN-1) 是一种具有口服活性的 PLK1 和 BET 蛋白家族双重抑制剂,对 PLK1、BRD2、BRD3、BRD4 和 BRDT 的 IC50 值分别为 22、402.5、150.7、103.9 和 311.9 nmol/L,它通过抑制 AR 和 MYC 介导的转录过程来诱导细胞周期阻滞 (cell cycle arrest) 和凋亡 (apoptosis),此外还可抑制 Enzalutamide (MS-H61960) 耐药 CRPC 异种移植瘤模型的肿瘤生长。
产品编号: MS-X30325 CAS No.: 2412707-81-2 分子式: C31H43N9O2 分子量: 573.73
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

WNY0824 (PLK1/BRD4-IN-1) 是一种具有口服活性的 PLK1 和 BET 蛋白家族双重抑制剂,对 PLK1、BRD2、BRD3、BRD4 和 BRDT 的 IC50 值分别为 22、402.5、150.7、103.9 和 311.9 nmol/L,它通过抑制 AR 和 MYC 介导的转录过程来诱导细胞周期阻滞 (cell cycle arrest) 和凋亡 (apoptosis),此外还可抑制 Enzalutamide (MS-H61960) 耐药 CRPC 异种移植瘤模型的肿瘤生长。

生物实验数据

生物活性 WNY0824 (PLK1/BRD4-IN-1) is an orally active dual inhibitor of PLK1 and the BET protein family, with IC50 values of 22, 402.5, 150.7, 103.9 and 311.9 nmol/L against PLK1, BRD2, BRD3, BRD4 and BRDT, respectively; it induces cell cycle arrest and apoptosis by inhibiting AR- and MYC-mediated transcription, and additionally suppresses tumor growth in an Enzalutamide (MS-H61960)-resistant CRPC xenograft model.
IC50 & Target

PLK1

22 nM (IC50)

BRD2

402.5 nM (IC50)

BRD3

150.7 nM (IC50)

BRD4

103.9 nM (IC50)

BRDT

311.9 nM (IC50)

体外研究
(In Vitro)

Cell Viability Assay

Cell Line: MV4-11, LnCap, HT-29, A375, SKOV-3
Concentration: Cells were maintained in RPMI 1640 or DMEM medium supplemented with 10% FBS (v/v) in 5% CO2, except for MV4-11 cells, which were cultured in IMDM medium.
Incubation Time: 72 h
Result: Showed broad-spectrum antiproliferative activities with IC50 values of 0.13, 0.14, 1.10, 2.82 and 2.51 µM against MV4-11, LnCap, SKOV-3, A375 and HT29 cells, respectively.

Cell Cycle Analysis

Cell Line: MV4-11
Concentration: 0.1, 0.3, 1, 3, 9 µM
Incubation Time: 24 h
Result: Induced obvious G2/M arrest in a concentration-dependent manner

Apoptosis Analysis

Cell Line: MV4-11
Concentration: 0.1, 0.3, 1, 3, 9 µM
Incubation Time: 48 h
Result: Significantly increased the number of Annexin V/PI-positive MV4-11 cells in a concentration-dependent manner.

RT-PCR

Cell Line: MV4-11
Concentration: 0.1, 0.3, 1, 3, 9 µM
Incubation Time: 24 h
Result: Reduced the transcription of c-MYC and MYCN as well as BCL-2, in a concentration-dependent manner.

Western Blot Analysis

Cell Line: MV4-11
Concentration: 0.1, 0.3, 1, 3, 9 µM
Incubation Time: 48 h
Result: Decreased the expression of c-Myc and Bcl-2 in a concentration dependent-manner and upregulated cleaved caspase-3 and cleaved PARP.
体内研究
(In Vivo)
Animal Model: Five weeks old male NOD-SCID mice.
Dosage: 60 mg/kg/d
Administration: Oral gavage, 18 days; tumor xenograft models were established by subcutaneously injecting 100 µL of 1×108 cell/mL MV4-11 cell suspension into NOD-SCID mice.
Result: Resulted in a significant decrease in average tumor size, with 66% tumor growth inhibition, and didn’t obviously affect the body weight of mice.

化学信息

分子量 573.73
分子式 C31H43N9O2
CAS No. 2412707-81-2
别名 PLK1/BRD4-IN-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础