ICI 147798 是一种口服有效的 β-肾上腺素受体 (β-adrenoceptor) 拮抗剂,其 pKB 为 9.1 (豚鼠右心房) 和 8.8 (豚鼠气管),它作为一种利尿剂和眼内压降低剂,可阻断 β-肾上腺素受体,抑制异丙肾上腺素诱导的心动过速和血管降压反应,对 β-1 肾上腺素受体表现出缓慢解离、不可克服的拮抗作用,对 β-2 肾上腺素受体表现出可克服的竞争性拮抗作用,并可诱导利钠和利钾作用、抑制钠转运、降低眼内压2]。
产品编号: MS-X25220 CAS No.: 83812-65-1 分子式: C24H30ClN7O4 分子量: 515.99
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

ICI 147798 是一种口服有效的 β-肾上腺素受体 (β-adrenoceptor) 拮抗剂,其 pKB 为 9.1 (豚鼠右心房) 和 8.8 (豚鼠气管),它作为一种利尿剂和眼内压降低剂,可阻断 β-肾上腺素受体,抑制异丙肾上腺素诱导的心动过速和血管降压反应,对 β-1 肾上腺素受体表现出缓慢解离、不可克服的拮抗作用,对 β-2 肾上腺素受体表现出可克服的竞争性拮抗作用,并可诱导利钠和利钾作用、抑制钠转运、降低眼内压2]。

生物实验数据

生物活性 ICI 147798 is an orally effective β-adrenoceptor antagonist with pKB values of 9.1 (guinea pig right atrium) and 8.8 (guinea pig trachea); as a diuretic and intraocular pressure-lowering agent, it blocks β-adrenoceptors, inhibits isoproterenol-induced tachycardia and vasodepressor responses, exhibits slowly dissociating, insurmountable antagonism at β-1 adrenoceptors and surmountable competitive antagonism at β-2 adrenoceptors, and induces natriuresis and kaliuresis, inhibits sodium transport, and reduces intraocular pressure2].
IC50 & Target

β-adrenoceptor

8.8 (pkB)

体外研究
(In Vitro)

ICI 147798 可抑制离体蟾蜍膀胱标本中的 Na+ 转运,其黏膜侧和浆膜侧的 IC50 值分别为 56 μM 和 120 μM。
ICI 147798 是离体豚鼠右心房中的 β-肾上腺素受体拮抗剂,其 pKB 值为 9.1。
ICI 147798 是离体豚鼠气管中的 β-肾上腺素受体拮抗剂,其 pKB 值为 8.8。

体内研究
(In Vivo)

ICI 147798 (0.125-0.75%;滴眼;单次给药) 对未麻醉的新西兰兔在水负荷诱导的高眼压模型中可产生具有统计学意义、浓度依赖性的眼压降低效果,其降眼压的 ED50 为 0.27%,0.5% 剂量下的作用持续时间为 5 小时。
ICI 147798 (0.1-1.0 mg/kg;静脉注射) 可作为强效静脉用 β-肾上腺素受体拮抗剂作用于未麻醉的新西兰兔,其阻断异丙肾上腺素诱导的心动过速的 ED50 为 0.23 mg/kg。
ICI 147798 (0.5%;局部给药;单剂量,每日 2 次,连续 4 天) 对未麻醉的新西兰兔体内异丙肾上腺素诱导的心动过速无显著阻断作用,即使在每日给药 2 次、连续给药 4 天后也是如此。

Animal Model: New Zealand rabbits (adult, 2-5 kg, both sexes, water-load-induced ocular hypertension model)
Dosage: 300 μl, 0.5%; 200 μl, 0.5%; 200 μl, 0.125%; 200 μl, 0.25%; 100 μl, 0.5%; 200 μl, 0.75%; 100 μl, 0.75%
Administration: eye drop; single dose
Result: Reduced mean water-load-induced IOP increase to 4.0 mmHg at 1 hour, 5.3 mmHg at 3 hours, and 6.2 mmHg at 5 hours after 300 μl, 0.5% topical dosing to one eye.
Reduced mean water-load-induced IOP increase to 4.5 mmHg (left eye) and 4.0 mmHg (right eye) at 1 hour after 200 μl, 0.5% topical dosing to both eyes (P<0.05 vs control).
Exhibited concentration-dependent IOP-lowering effect with an ED50 of 0.27%.
Reduced mean water-load-induced IOP increase to 5.5 mmHg (left eye) and 5.5 mmHg (right eye) after 100 μl, 0.5% dosing in 5% PEG 400 + 5% Pluronic F127 vehicle.
Showed no enhanced IOP-lowering efficacy with 0.75% concentration or 200 μl volume, with mean ΔmmHg values ranging from 5.0 to 5.5 mmHg.

化学信息

分子量 515.99
分子式 C24H30ClN7O4
CAS No. 83812-65-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础