LY2409881 是一种选择性 IκB 激酶 β (IKK2) 抑制剂,其 IC50 为 30 nM。
产品编号: MS-X10429 CAS No.: 946518-61-2 分子式: C24H29ClN6Os 分子量: 485.04
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
2mg
询价
询价
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

LY2409881 是一种选择性 IκB 激酶 β (IKK2) 抑制剂,其 IC50 为 30 nM。

生物实验数据

生物活性 LY2409881 is a selective IκB kinase β (IKK2) inhibitor with an IC50 of 30 nM.
IC50 & Target IKKβ:30 nM (IC50)
体外研究
(In Vitro)

LY2409881 is an IKK2 inhibitor that inhibits TNFα-induced activation of NF-κB. By in vitro kinase assay, LY2409881 potently inhibits IKK2, with an IC50 of 30 nM. In contrast, the IC50 for IKK1 and other common kinases is at least one log higher. The specificity of LY2409881 for NF-κB signaling is further studied in a cell-based assay, by examining the effect of LY2409881 in the TNFα-dependent antiapoptosis function. TNFα is a well-characterized upstream stimulus of NF-κB. In the ovarian cancer cell line SKOV3, LY2409881 demonstrates moderate cytotoxicity, whereas TNFα at 10 ng/mL does not cause any cytotoxicity. In contrast, coadministration of LY2409881 and TNFα results in markedly higher cell killing compared with LY2409881. This is because TNFα-dependent activation of antiapoptotic signals mediated by NF-κB is blocked by LY2409881, while the proapoptotic TNF receptor-associated death domain (TRADD) and FAS-associated death domain (FADD) cascade pathways activated by TNFα are not affected by LY2409881.

体内研究
(In Vivo)

A well-established xenograft model of DLBCL is used to confirm the activity of LY2409881 in vivo. SCID-beige mice implanted with LY10 cell-derived tumors are given intraperitoneal injections of LY2409881 twice weekly at three different doses: 50, 100, and 200 mg/kg. The treatments are well tolerated, resulting in no death or severe morbidity of the mice. The average tumor volume is graphed as a function of time for each treatment group. The rates of tumor volume growth of the treatment groups are all significantly slower than the untreated control group (P≤0.01).

化学信息

分子量 485.04
分子式 C24H29ClN6Os
CAS No. 946518-61-2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : ≥ 37 mg/mL (76.28 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.0617 mL10.3084 mL20.6169 mL51.5421 mL
5 mM0.4123 mL2.0617 mL4.1234 mL10.3084 mL
10 mM0.2062 mL1.0308 mL2.0617 mL5.1542 mL
15 mM0.1374 mL0.6872 mL1.3745 mL3.4361 mL
20 mM0.1031 mL0.5154 mL1.0308 mL2.5771 mL
25 mM0.0825 mL0.4123 mL0.8247 mL2.0617 mL
30 mM0.0687 mL0.3436 mL0.6872 mL1.7181 mL
40 mM0.0515 mL0.2577 mL0.5154 mL1.2886 mL
50 mM0.0412 mL0.2062 mL0.4123 mL1.0308 mL
60 mM0.0344 mL0.1718 mL0.3436 mL0.8590 mL
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础