MTHFD2-IN-8 是一种选择性 MTHFD2 抑制剂(IC50 为 0.066 μM),可直接结合定位于细胞内线粒体的蛋白 MTHFD2 并选择性在肿瘤线粒体中累积,进而升高细胞内活性氧 (ROS) 水平、诱导线粒体膜电位去极化、将细胞周期阻滞于 G0/G1 期并促进癌细胞发生凋亡 (apoptosis),同时可抑制小鼠结肠癌移植模型中的肿瘤生长。
MTHFD2-IN-8
产品编号: MS-X07569 分子式: C41H40BrO5P 分子量: 723.63
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

MTHFD2-IN-8 是一种选择性 MTHFD2 抑制剂(IC50 为 0.066 μM),可直接结合定位于细胞内线粒体的蛋白 MTHFD2 并选择性在肿瘤线粒体中累积,进而升高细胞内活性氧 (ROS) 水平、诱导线粒体膜电位去极化、将细胞周期阻滞于 G0/G1 期并促进癌细胞发生凋亡 (apoptosis),同时可抑制小鼠结肠癌移植模型中的肿瘤生长。

生物实验数据

生物活性 MTHFD2-IN-8 is a selective MTHFD2 inhibitor with an IC50 of 0.066 μM that directly binds to the intracellular mitochondria-localized protein MTHFD2 and selectively accumulates in tumor mitochondria, thereby elevating intracellular reactive oxygen species (ROS) levels, inducing mitochondrial membrane potential depolarization, arresting the cell cycle at the G0/G1 phase, and promoting apoptosis in cancer cells, while also inhibiting tumor growth in a mouse colon cancer xenograft model.
IC50 & Target

MTHFD2

0.066 μM (IC50)

体外研究
(In Vitro)

MTHFD2-IN-8 (Compound 2c) (1.5625-100 μM; 48 h) 可强效抑制 A549、HCT116、SW620 和 CT26 肿瘤细胞的活力,其 IC50 值介于 5.17 μM 至 9.72 μM 之间;相较于正常 HEK293 细胞,该化合物对肿瘤细胞表现出选择性毒性 (IC50 = 17.69 μM)。
MTHFD2-IN-8 (5 μM; 10 h) 可选择性富集于 HCT116 结肠肿瘤细胞线粒体中,其水平比正常 HEK293 细胞线粒体高 9.16 倍。
MTHFD2-IN-8 (2.5-10 μM; 24 h) 可在 HCT116 结肠肿瘤细胞中诱导浓度依赖性凋亡。
MTHFD2-IN-8 (2.5-10 μM; 24 h) 可在 HCT116 结肠肿瘤细胞中诱导浓度依赖性 G0/G1 期细胞周期阻滞。
MTHFD2-IN-8 (2.5-10 μM; 24 h) 可在 HCT116 结肠肿瘤细胞中诱导浓度依赖性的线粒体膜电位去极化和 ROS 水平呈浓度依赖性升高。
MTHFD2-IN-8 可强效且选择性地抑制纯化的 MTHFD2 酶活性,其 IC50 为 0.066 μM,对 MTHFD2 的选择性比对 MTHFD1 (IC50 = 2.89 μM) 高 43.78 倍。
MTHFD2-IN-8 (10 μM; 48 h) 通过靶向 MTHFD2 介导的一碳代谢抑制 HCT116 结肠肿瘤细胞增殖,补充 Sodium formate (MS-R67970) 可部分逆转其抗增殖活性,这一结果证明了上述作用机制。
MTHFD2-IN-8 (3 h) 可直接与 HCT116 结肠肿瘤细胞内的 MTHFD2 结合,提高该蛋白的热稳定性。

Cell Viability Assay

Cell Line: A549, HCT116, SW620, CT26, HEK293 cells
Concentration: 1.5625,
3.125, 6.25, 12.5, 25, 50, 100 μM
Incubation Time: 48 h
Result: Potently inhibited viability of all tested tumor cell lines: A549 with an IC50 of 6.86 μM, HCT116 with an IC50 of 5.17 μM, SW620 with an IC50 of 7.84 μM, and CT26 with an IC50 of 9.72 μM.
Inhibited normal HEK293 cell viability with an IC50 of 17.69 μM, resulting in a selectivity index (SI, IC50 HEK293/IC50 HCT116) of ≈3.42.

Apoptosis Analysis

Cell Line: HCT116
Concentration: 2.5, 5, 10 μM
Incubation Time: 24 h
Result: Increased cell loss and induced apoptotic nuclear changes (intense blue fluorescence, crescent-shaped bands, discrete foci) in a concentration-dependent manner.\nIncreased total apoptotic cell proportion in a concentration-dependent manner: from 7.11% in the control group to 17.03% (2.5 μM), 21.89% (5 μM), and 30.2% (10 μM).
Increased the proportion of necrotic cells.

Cell Cycle Analysis

Cell Line: HCT116
Concentration: 2.5, 5, 10 μM
Incubation Time: 24 h
Result: Increased the proportion of cells in the G0/G1 phase in a concentration-dependent manner: from 45.6% in the control group to 50.3% (2.5 μM), 57.2% (5 μM), and 62.6% (10 μM).
体内研究
(In Vivo)

MTHFD2-IN-8 (Compound 2c) (20-40 mg/kg;腹腔注射;每 3 天 1 次;持续 2 周) 在小鼠皮下移植模型中以剂量依赖方式抑制结肠癌生长,在 40 mg/kg 剂量下的肿瘤抑制率达 62.64%,且未观察到对主要器官的体内毒性。

Animal Model: Colon cancer BALB/c mice (male, 6-8 weeks old, subcutaneous graft model via injection of 1×106 CT26 cells)
Dosage: 20 mg/kg; 40 mg/kg
Administration: i.p.; once every 3 days; 2 weeks
Result: Achieved a 49.70% tumor inhibition rate at 20 mg/kg.
Achieved a 62.64% tumor inhibition rate at 40 mg/kg.
Significantly decreased tumor growth curves compared with the control group.
Maintained stable body weight during treatment.
Showed no obvious abnormalities in major organs (myocardial fibers, hepatocytes, splenic lymphocytes, renal cells, alveolar structures) with no signs of degeneration, necrosis, inflammatory infiltration, or disorganized tissue structure.

化学信息

分子量 723.63
分子式 C41H40BrO5P

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础