MG-262

Synonyms: Z-Leu-Leu-LeuB(OH)2; ZL3B
MG-262 (Z-Leu-Leu-LeuB(OH)2; ZL3B) 是一种可逆性蛋白酶体 (proteasome) 抑制剂,可下调 VEGF 受体 Flt-1、抑制恶性细胞生长并诱导细胞凋亡 (apoptosis) 和活性氧 (ROS),可用于癌症研究。
产品编号: MS-X04015 纯度: 95.0% CAS No.: 179324-22-2 分子式: C25H42BN3O6 分子量: 491.43
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价

产品描述

MG-262 (Z-Leu-Leu-LeuB(OH)2; ZL3B) 是一种可逆性蛋白酶体 (proteasome) 抑制剂,可下调 VEGF 受体 Flt-1、抑制恶性细胞生长并诱导细胞凋亡 (apoptosis) 和活性氧 (ROS),可用于癌症研究。

生物实验数据

生物活性 MG-262 (Z-Leu-Leu-LeuB(OH)2; ZL3B) is a reversible proteasome inhibitor that downregulates the VEGF receptor Flt-1, inhibits malignant cell growth, and induces apoptosis and reactive oxygen species (ROS), and can be used for cancer research.
体外研究
(In Vitro)

MG-262 (1 μM,16 小时) 下调鸡眼梳膜外植体中 VEGF 受体 Flt-1 (血管内皮生长因子受体 1) 的基因表达。
MG-262 (500 nM,12 小时) 下调人类微血管内皮细胞中的 Flt-1 基因表达。
MG-262 (500 nM,12 小时) 可抑制巨噬细胞中 Lipopolysaccharide (LPS) (MS-X54539) 诱导的 Flt-1,并在 LPS 诱导后下调 Flt-1 的表达。
MG-262 (0.1 nM-1 μM,24 h) 在 HEK293 细胞中以浓度依赖性方式增加 IL-8 启动子和激活蛋白-1 (AP-1) 的活性,但抑制细胞因子诱导的 NF-κB 活化 (IC50 = 1-3 nM)。
MG-262 (0.1 μM,5-180 min) 以时间依赖性方式增加 HEK293 细胞内的活性氧。
MG262 (0.125-1 μM,48 h) 抑制 H22 和 K562 细胞的生长,并与 Gambogic Acid (GA) (MS-O28328) 联合具有协同作用。。
MG262 (0.025 μM,24 h) 与 GA 联合使用可诱导 H22 和 K562 细胞凋亡。
MG262 (0.025 μM,12 或 24 h) 与 GA 联合使用可诱导 K562 细胞中 PARP 裂解以及 caspase 8 和 9 裂解/活化,但单独使用时则不会产生这种效果。

Cell Viability Assay

Cell Line: Murine hepatoma H22 and human leukemia K562 cells
Concentration: 0.125, 0.25, 0.5, 1 μM
Incubation Time: 48 h
Result: From 5% when treated with 6.25 nM alone to 82% when combined with GA in K562 cells.
The addition of GA boosted the inhibitory effects on cell viability/proliferation from 11% to 73%.

Apoptosis Analysis

Cell Line: Murine hepatoma H22 and human leukemia K562 cells
Concentration: 0.025 μM
Incubation Time: 24 h
Result: Showed that co-treatment of these malignant cells, especially K562 cells, dramatically increased the population of both Annexin V and propidium iodide (PI) stained cells, indicating that the combination with GA induced more cell death than each alone.

RT-PCR

Cell Line: explant cultures of whole pecten oculi
Concentration: 1 μM
Incubation Time: 16 h
Result: The level of Flt-1 transcripts markedly decreased in the presence of the proteasome inhibitor.
The level of the KDR, VEGF, Ang-1 and Ang-2 transcripts was not changed by the presence of the proteasome inhibitor.

RT-PCR

Cell Line: Human microvascular dermal neonatal endothelial cells (HMVEC-d-Neo)
Concentration: 500 nM
Incubation Time: 12 h
Result: The level of Flt-1 transcripts markedly decreased in the presence of the proteasome inhibitor.

Western Blot Analysis

Cell Line: K562 cells
Concentration: 25 nM
Incubation Time: 12 or 24 h
Result: The GA + proteasome inhibitor, but not GA or proteasome inhibitor alone, could induce cleavage of PARP as well as cleavage/activation of caspases 8 and 9.
体内研究
(In Vivo)

MG-262 (5 μmol/kg (2.5 mg/kg);静脉注射;收集组织样本前 20 小时) 使 GFPdgn 转基因小鼠中的 GFPdgn 蛋白积累。
MG-262 (1-5 μmol/kg (0.5-2.5 mg/kg);腹腔注射;测试前 20 小时) 会在 UbG76V-GFP/1 小鼠肝脏中积聚 GFP 报告基因,表明泛素/蛋白酶体系统受到严重损害。

Animal Model: UbG76V-GFP/1 mice (The transgenic construct was injected into fertilized CBA × C57BL/6 F1 oocytes. Transgenic founders were backcrossed to C57BL/6 mice)
Dosage: 1, 5 μmol/kg (0.5, 2.5 mg/kg)
Administration: Intraperitoneal injection (i.p.); 20 h before test
Result: Fluorescent cells were detected exclusively in the livers, resulted in accumulation of GFP in the vast majority of hepatocytes distributed throughout the live.
A dose-dependent decrease of the chymotrypsin-like activity of the proteasome was observed in lysates of the liver, kidney and spleen.
Animal Model: Transgenic mice (ubiquitously expresses a surrogate protein substrate for the Ubiquitin-proteasome system, referred to as GFPdgn)
Dosage: 5 μmol/kg (2.5 mg/kg)
Administration: Intravenous injection (i.v.); 20 h before the tissue samples were collected
Result: Inhibited chymotryptic activity in the heart, lungs, skeletal (Sk.) muscle, and liver by 50-75%.
GFPdgn levels in all the indicated organs clearly displayed significant increases.
性状 固体
颜色 White to off-white

化学信息

分子量 491.43
分子式 C25H42BN3O6
CAS No. 179324-22-2
别名 Z-Leu-Leu-LeuB(OH)2; ZL3B

储存&溶解度

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 5 mg/mL (10.17 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.0349 mL10.1744 mL20.3488 mL50.8719 mL
5 mM0.4070 mL2.0349 mL4.0698 mL10.1744 mL
10 mM0.2035 mL1.0174 mL2.0349 mL5.0872 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础