PI3Kδ-IN-28 是一种具有口服活性和选择性的 PI3Kδ 抑制剂(IC50 为 6.1 nM),可抑制促炎性 M1 巨噬细胞极化、促进抗炎性 M2 表型、减轻肺水肿与炎性浸润,并可用于急性肺损伤的相关研究。
PI3Kδ-IN-28
产品编号: MS-W96756 分子式: C29H25F3N6O2 分子量: 546.54
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PI3Kδ-IN-28 是一种具有口服活性和选择性的 PI3Kδ 抑制剂(IC50 为 6.1 nM),可抑制促炎性 M1 巨噬细胞极化、促进抗炎性 M2 表型、减轻肺水肿与炎性浸润,并可用于急性肺损伤的相关研究。

生物实验数据

生物活性 PI3Kδ-IN-28 is an orally active and selective PI3Kδ inhibitor with an IC50 of 6.1 nM that inhibits pro-inflammatory M1 macrophage polarization, promotes the anti-inflammatory M2 phenotype, alleviates pulmonary edema and inflammatory infiltration, and can be used for research related to acute lung injury.
IC50 & Target

PI3Kδ

 

MMP-9

 

MMP-12

 

Akt

 

IL-4

 

体外研究
(In Vitro)

PI3Kδ-IN-28 (compound 48) 可强效且选择性地抑制重组 PI3Kδ,其 IC50 为 6.1 nM,对其他 I 类 PI3K 亚型的选择性超过 344 倍。
PI3Kδ-IN-28 (10 μM) 可通过抑制 M1 促炎反应并促进 M2 抗炎极化,在 LPS 刺激的 RAW 264.7 细胞中表现出强效抗炎活性。
PI3Kδ-IN-28 (0.1-10 μM) 可呈剂量依赖性地抑制 LPS 刺激的 RAW 264.7 细胞中 MMP2、MMP9 和 MMP12 在 mRNA 及蛋白水平的表达;抑制 PI3K/AKT 信号通路,且其效力高于 idelalisib (MS-Y92518)。

体内研究
(In Vivo)

PI3Kδ-IN-28 (compound 48) (5-20 mg/kg;口服;每日) 可剂量依赖性地减轻雄性 C57BL/6J 小鼠中 LPS 诱导的急性肺损伤、脓毒性肺损伤,其中 20 mg/kg 剂量的疗效优于 idelalisib。

Animal Model: C57BL/6J (male, 6-8 weeks old, intratracheal LPS-induced)
Dosage: 5 mg/kg; 10 mg/kg; 20 mg/kg
Administration: p.o.; daily
Result: Suppressed lung index notably, and 20 mg/kg exhibited better therapeutic potency than idelalisib.
Dropped lung wet/dry ratio significantly, matching the efficacy of idelalisib.
Exerted no aggravating impacts on LPS-elicited weight loss.
Alleviated pulmonary edema and hemorrhage in a dose-responsive fashion.
Lessened peripheral monocyte quantities at 20 mg/kg, with negligible shifts in total leukocytes, lymphocytes and neutrophils.
Maintained intact alveolar structure, inhibited inflammatory cell infiltration and lowered lung injury scores dose-dependently; the 20 mg/kg dosage outperformed idelalisib.
Animal Model: C57BL/6J (male, 6-8 weeks old, intraperitoneal LPS-induced)
Dosage: 5 mg/kg; 10 mg/kg; 20 mg/kg
Administration: p.o.; daily
Result: Reduced lung index markedly, with 20 mg/kg exerting stronger effects than idelalisib.
Lowered lung wet-to-dry ratio at 20 mg/kg and displayed better edema relief than idelalisib.
Rescued LPS-triggered acute body weight loss at 20 mg/kg.
Suppressed pulmonary edema and hemorrhage dose-dependently, with peak protection at 20 mg/kg.
Cut total white blood cell and monocyte counts at 20 mg/kg, whereas 5 mg/kg elevated neutrophil levels.
Alleviated inflammatory infiltration, parenchymal injury and lung inflammation scores, and maintained alveolar structure in a dose-dependent fashion; 20 mg/kg outperformed idelalisib.

化学信息

分子量 546.54
分子式 C29H25F3N6O2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础