Lss-11 是一种拓扑异构酶 (topoisomerase) 抑制剂,通过提升 DR5 蛋白水平并诱导 PARP1 裂解来触发细胞凋亡 (apoptosis),从而增强癌细胞死亡,同时可剂量依赖性地降低 STAT3 的磷酸化水平、下调其靶基因 MDR1 和 MRP1、降低 P-gp 蛋白表达且不影响 P-gp 的转运功能;作为一种化学增敏剂,Lss-11 与 Paclitaxel 联用可产生协同抗癌效应,并可用于紫杉醇耐药性肺癌的研究。
产品编号: MS-W80491 CAS No.: 1392014-36-6 分子式: C21H27N7O2 分子量: 409.48
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Lss-11 是一种拓扑异构酶 (topoisomerase) 抑制剂,通过提升 DR5 蛋白水平并诱导 PARP1 裂解来触发细胞凋亡 (apoptosis),从而增强癌细胞死亡,同时可剂量依赖性地降低 STAT3 的磷酸化水平、下调其靶基因 MDR1 和 MRP1、降低 P-gp 蛋白表达且不影响 P-gp 的转运功能;作为一种化学增敏剂,Lss-11 与 Paclitaxel 联用可产生协同抗癌效应,并可用于紫杉醇耐药性肺癌的研究。

生物实验数据

生物活性 Lss-11 is a topoisomerase inhibitor that triggers apoptosis by elevating DR5 protein levels and inducing PARP1 cleavage, thereby enhancing cancer cell death; it dose-dependently reduces STAT3 phosphorylation, downregulates its target genes MDR1 and MRP1, and decreases P-gp protein expression without affecting P-gp transport function; as a chemosensitizer, Lss-11 produces synergistic anticancer effects in combination with Paclitaxel and can be used for the study of paclitaxel-resistant lung cancer.
IC50 & Target

STAT3

 

PARP1

 

体外研究
(In Vitro)

Lss-11 (0.5-2 μM; 72 h) 在 Paclitaxel (HY-B0015) 耐药的 A549/T 肺癌细胞中的 IC50 为 6.87 μM,在 Paclitaxel 敏感型 A549 肺癌细胞中则大于 10 μM,且可与 Paclitaxel 协同降低 A549/T 细胞的存活率。
Lss-11 (0.5 μM; 6-24 h) 以时间依赖的方式提高 Paclitaxel 耐药性 A549/T 肺癌细胞的凋亡率,处理 24 h 后凋亡率达到 16.50%。
Lss-11 (0.5-2 μM; 24 h) 在 Paclitaxel 耐药的 A549/T 肺癌细胞中可上调 DR5 和剪切型 PARP1 的蛋白水平,且不改变 Bax 或 Bcl2 的蛋白水平,同时下调 MRP1 的蛋白水平。
Lss-11 (0.5-2 μM; 24 h) 可降低 Paclitaxel 耐药性 A549/T 肺癌细胞中磷酸化 STAT3 蛋白水平,同时提升总 STAT3 蛋白水平,且 p-STAT3 的下调与 MDR1 和 MRP1 的表达下调呈显著相关性。
Lss-11 (0.5-2 μM; 24 h) 可显著下调 Paclitaxel 耐药性 A549/T 肺癌细胞中 MDR1 和 MRP1 的 mRNA 水平。
Lss-11 (0.5-2 μM; 24 h) 可降低 Paclitaxel 耐药性 A549/T 肺癌细胞中 P-gp 蛋白的表达。
Lss-11 (24 h) 可抑制 Paclitaxel 耐药性 A549/T 肺癌细胞中 STAT3 与 MDR1 及 MRP1 启动子的结合。

Apoptosis Analysis

Cell Line: paclitaxel-resistant A549/T lung cancer cells
Concentration: 0.5 μM
Incubation Time: 6 h, 24 h
Result: Increased the percentage of Annexin V+/PI+ apoptotic A549/T cells from 3.87% (untreated) to 11.23% after 6 h and 16.50% after 24 h.

Western Blot Analysis

Cell Line: paclitaxel-resistant A549/T lung cancer cells
Concentration: 0.5 μM, 2 μM
Incubation Time: 24 h
Result: Dose-dependently increased protein levels of DR5 and cleaved PARP1 in A549/T cells relative to vehicle-treated controls.
Had no significant effect on Bax or Bcl2 protein levels.
Reduced MRP1 protein levels to 0.7 relative to the vehicle control (set at 1.0) at 2 μM.\nSignificantly reduced phosphorylated STAT3 (p-STAT3) protein levels in A549/T cells relative to vehicle-treated controls, while increasing total STAT3 protein levels.
Showed a strong positive correlation between reduction in p-STAT3 and downregulation of MDR1 (r=0.94) and MRP1 (r=0.89) mRNA levels.

Real Time qPCR

Cell Line: paclitaxel-resistant A549/T lung cancer cells
Concentration: 0.5 μM, 2 μM
Incubation Time: 24 h
Result: Downregulated MDR1 mRNA levels by 9-fold and MRP1 mRNA levels by 26-fold in A549/T cells relative to vehicle-treated controls at 0.5 μM.
Significantly downregulated MDR1 and MRP1 mRNA levels at 2 μM.

Immunofluorescence

Cell Line: paclitaxel-resistant A549/T lung cancer cells
Concentration: 0.5 μM, 2 μM
Incubation Time: 24 h
Result: Reduced P-gp protein abundance in A549/T cells treated with 0.5 μM or 2 μM LSS-11 relative to vehicle-treated controls.

化学信息

分子量 409.48
分子式 C21H27N7O2
CAS No. 1392014-36-6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础