Lactacystin 是一种有效的、口服活性、不可逆的、细胞渗透性、选择性的 20S 蛋白酶体 (proteasome) 抑制剂 (IC50 = 4.8 μM),还能抑制溶酶体酶组织蛋白酶 A (cathepsin A),可抑制细胞生长、诱导细胞凋亡 (apoptosis) 和周期阻滞,并具有抗病毒和抗氧化活性,能诱导神经突生长并诱发高血压,在癌症、神经系统疾病、高血压和疟疾等方面具有研究潜力。
产品编号: MS-W72091 纯度: 99.21% CAS No.: 133343-34-7 分子式: C15H24N2O7S 分子量: 376.43
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50μg
询价
3-5 天
100μg
询价
3-5 天
500μg
询价
询价

产品描述

Lactacystin 是一种有效的、口服活性、不可逆的、细胞渗透性、选择性的 20S 蛋白酶体 (proteasome) 抑制剂 (IC50 = 4.8 μM),还能抑制溶酶体酶组织蛋白酶 A (cathepsin A),可抑制细胞生长、诱导细胞凋亡 (apoptosis) 和周期阻滞,并具有抗病毒和抗氧化活性,能诱导神经突生长并诱发高血压,在癌症、神经系统疾病、高血压和疟疾等方面具有研究潜力。

生物实验数据

生物活性 Lactacystin is a potent, orally active, irreversible, cell-permeable, and selective 20S proteasome inhibitor (IC50 = 4.8 μM) that also inhibits the lysosomal enzyme cathepsin A, suppresses cell growth, induces apoptosis and cell cycle arrest, exhibits antiviral and antioxidant activities, induces neurite outgrowth, and elicits hypertension, showing research potential in cancer, neurological disorders, hypertension, and malaria.
IC50 & Target Proteasome:4.8 μM
体外研究
(In Vitro)

Lactacystin (浓度高达 25.6 µM,作用 1 小时) 对 HeLa 细胞或 SH-SY5Y 细胞无细胞毒性,并可使 HeLa 细胞中的 RVP 感染降低 63.8%,SH-SY5Y 细胞中的 RVP 感染降低 74.5%。
Lactacystin (2.5 μM) 与 Parthenolide (MS-T47851) (5 μM) 联合使用,可协同增加耐药 L1210 细胞的凋亡率。
Lactacystin (2.5、5 和 10 µM,24 小时) 可抑制 C6 细胞增殖 (IC50 值为 10 μ M) 并增加其凋亡。
Lactacystin (10 μM,24 小时) 可增加 Cisplatin (MS-E94993) 诱导的 Hela 细胞内质网应激相关细胞凋亡。
Lactacystin (7.5 μM,4-48 小时) 可增加 HT-29 细胞中的活性氧和 GSH 水平。
Lactacystin (1、2.5、5 μM,24 小时) 可诱导新生大鼠皮质星形胶质细胞星状化。
Lactacystin (10 μM, 8-24 小时) 诱导 PC12 细胞凋亡、G2/M 细胞周期停滞。

Cell Viability Assay

Cell Line: C6 cells
Concentration: 0, 2.5, 5, 10 µM
Incubation Time: 24 h
Result: Suppressed cell growth and viability to 28.9%, and increased the apoptotic in C6 cells.

Cell Viability Assay

Cell Line: PC12
Concentration: 5, 10, 20 µM
Incubation Time: 24 h
Result: Declined cell viability in a concentration-dependent manner (79.47% at 5 mM, 49.31% at 10 μM and 31.20% at 20 μM.

Apoptosis Analysis

Cell Line: PC12
Concentration: 10 μM
Incubation Time: 4, 8, 16, 24h
Result: Increased significantly apoptotic in a time-dependent manner from 8 to 24 h (14.10% at 8 h, 24.90% at 16 h and 39.41% at 24 h).

Cell Cycle Analysis

Cell Line: PC12
Concentration: 10 μM
Incubation Time: 4, 8, 16, 24h
Result: Reduced in the number of cells in the G2-phase (from 17.45% to 30.94%, 31.80% and 32.18%, respectively.) of the cell cycle for 8, 16 and 24h.

RT-PCR

Cell Line: C6 cells, HT-29 cells
Concentration: 0, 2.5, 5, and 10 µM (C6 cells), 7.5 μM in HT-29 cells
Incubation Time: 24-48 h
Result: Increased the mRNA in the ratio of Bax to Bcl-2 in C6cells.
Increased the expression of GGT, GCLC, xCT and Nrf2 in HT-29 cells.

Western Blot Analysis

Cell Line: C6 cells, HT-29 cells
Concentration: 0, 2.5, 5, and 10 µM (C6 cells), 7.5 μM in HT-29 cells
Incubation Time: 24-48h
Result: Increased the expression in the ratio of Bax to Bcl-2 in C6cells.
Increased protein levels of GGT, GCLC, xCT in HT-29 cells.
体内研究
(In Vivo)

注意:
请勿仅参考一篇文章来确定实验条件。建议在正式实验前,通过预实验确定最佳实验条件 (动物品系、年龄、剂量、频率及周期、检测时间及指标等)。

Lactacystin (显微注射; 2 μg) 在年轻和成年小鼠注射 5-7 天后诱导帕金森病样运动表型。

Animal Model: Male C57Bl/6RccHsd mice with 8-9 weeks (young) and 12-14 months (adult) old
Dosage: 2 µg
Administration: Microinjection
Result: Induced a Parkinson’s disease-like motor phenotype 5-7 days after injection in young and adult mice.
Animal Model: Male C57Bl/6RccHsd mice
Dosage: 2 μg, 7days
Administration: Intracerebroventricular injection (ICV)
Result: Induced spontaneous contralateral rotating behavior.
Animal Model: C6 orthotopic xenograft tumor models
Dosage: 1.0 µg or 5.0  µg/20g for 7days
Administration: Intravenous injection (i.p.)
Result: Reduced the tumor volume.
Showed polygonal condensed nuclei with brown Tunnel staining indicating apoptosis in tumor tissue.
Increased the mRNA and protein level in the ratio of Bax to Bcl-2 in tumor tissue.
性状 固体
颜色 White to off-white

化学信息

分子量 376.43
分子式 C15H24N2O7S
CAS No. 133343-34-7

储存&溶解度

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 20 mg/mL (53.13 mM; 超声加热助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.6565 mL13.2827 mL26.5654 mL66.4134 mL
5 mM0.5313 mL2.6565 mL5.3131 mL13.2827 mL
10 mM0.2657 mL1.3283 mL2.6565 mL6.6413 mL
15 mM0.1771 mL0.8855 mL1.7710 mL4.4276 mL
20 mM0.1328 mL0.6641 mL1.3283 mL3.3207 mL
25 mM0.1063 mL0.5313 mL1.0626 mL2.6565 mL
30 mM0.0886 mL0.4428 mL0.8855 mL2.2138 mL
40 mM0.0664 mL0.3321 mL0.6641 mL1.6603 mL
50 mM0.0531 mL0.2657 mL0.5313 mL1.3283 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础