SBP-5147 是一种具有口服活性的 ULK1/ULK2 抑制剂,对 ULK1 的 IC50 为 2 nM、对 ULK2 的 IC50 为 53 nM,可抑制 Beclin-1 和 Vps34 的磷酸化、减少自噬 (autophagy) 流、下调 ATG13 和 ATG101 的表达、上调 MHC-I 的表达、诱导半胱天冬酶 (caspase) 依赖性细胞凋亡 (apoptosis) 并降低非小细胞肺癌细胞的存活率,可用于非小细胞肺癌的相关研究。
产品编号: MS-W60859 CAS No.: 1884222-37-0 分子式: C17H18F3N5 分子量: 349.35
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

SBP-5147 是一种具有口服活性的 ULK1/ULK2 抑制剂,对 ULK1 的 IC50 为 2 nM、对 ULK2 的 IC50 为 53 nM,可抑制 Beclin-1 和 Vps34 的磷酸化、减少自噬 (autophagy) 流、下调 ATG13 和 ATG101 的表达、上调 MHC-I 的表达、诱导半胱天冬酶 (caspase) 依赖性细胞凋亡 (apoptosis) 并降低非小细胞肺癌细胞的存活率,可用于非小细胞肺癌的相关研究。

生物实验数据

生物活性 SBP-5147 is an orally active ULK1/ULK2 inhibitor with an IC50 of 2 nM for ULK1 and 53 nM for ULK2 that inhibits the phosphorylation of Beclin-1 and Vps34, reduces autophagic flux, downregulates ATG13 and ATG101 expression, upregulates MHC-I expression, induces caspase-dependent apoptosis, and decreases the viability of non-small cell lung cancer cells, and can be used for research related to non-small cell lung cancer.
IC50 & Target ULK2:53 nM
体外研究
(In Vitro)

SBP-5147 (Compound 5) 在 NanoBRET 实验中可与 HEK293T 细胞内的 ULK1 结合,其 IC50 为 47 nM。
SBP-5147 (10 μM; 1 h) 在转染的 HEK293T 细胞中可将 ULK1 下游底物 Beclin-1 (Ser15) 和 Vps34 (Ser249) 的磷酸化水平抑制约 80%。
SBP-5147 (10 μM; 18 h) 可抑制营养饥饿状态下 A549 细胞中的自噬流,减少高自噬流细胞群体。
SBP-5147 (72 h) 可降低 A549、HCC827、H1373、H1975 细胞的活力,IC50 分别为91、49、40、35 nM。
SBP-5147 (1 μM; 8-24 h) 可诱导 A549 细胞发生 caspase 依赖性凋亡。
SBP-5147 (15-30 nM; 72 h) 可显著上调 H1373、HCC827 和 A549 细胞中总 MHC-I 蛋白的表达。
SBP-5147 可在生化 ADP-Glo 实验中强效抑制 ULK1 激酶活性 (IC50 = 2 nM) 和 ULK2 激酶活性 (IC50 = 53 nM)。
SBP-5147 (48 h) 可诱导 A549 非小细胞肺癌 (NSCLC) 细胞中 ATG13 降解,IC50 为 4.5 μM。

Western Blot Analysis

Cell Line: HEK293T cells transfected with Myc-tagged WT ULK1 and Flag-tagged Beclin-1 or Vps34
Concentration: 10 μM
Incubation Time: 1 h
Result: Inhibited phosphorylation of Beclin-1 at Ser15 by roughly 80% relative to DMSO-treated cells.
Inhibited phosphorylation of Vps34 at Ser249 by roughly 80% relative to DMSO-treated cells.

Cell Autophagy Assay

Cell Line: A549 NSCLC cells expressing mCherry-GFP-LC3 reporter
Concentration: 10 μM
Incubation Time: 18 h
Result: Reduced the percentage of cells exhibiting high autophagic flux, shifting populations to intermediate and low flux relative to EBSS-only treated cells.

Apoptosis Analysis

Cell Line: A549, H1975 NSCLC cells
Concentration: 1 μM
Incubation Time: 24 h (imaging); 8 h (Western blot)
Result: Induced caspase-dependent apoptotic cell death in A549 cells, with cell death abrogated by Emricasan and partially inhibited by zVAD-fmk.
Induced cleavage of PARP and caspase-3, blocked by apoptosis inhibitors.

Western Blot Analysis

Cell Line: H1373, HCC827, A549, H1975 NSCLC cell lines
Concentration: 15 nM, 30 nM
Incubation Time: 72 h
Result: Significantly increased total MHC-I protein expression at 30 nM in H1373, HCC827, and A549 cells.
Increased expression in H1373 and HCC827 cells also at 15 nM.
Had no significant effect on H1975 cells.
体内研究
(In Vivo)

SBP-5147 (10 mg/kg;灌胃;单次给药) 可使 C57BL/6J 小鼠肝脏和肺组织中的 ATG13 与 ATG101 蛋白水平降低,表明其可持久地靶向抑制自噬。

Animal Model: C57BL/6J (8-week-old female)
Dosage: 10 mg/kg
Administration: p.o.; single dose
Result: Caused progressive, significant decrease in ATG13 and ATG101 protein levels in liver and lung tissues.
Maintained significantly reduced ATG13 and ATG101 levels at 24 hours postdosing (plasma SBP-5147 almost completely eliminated) compared to vehicle-treated samples.
Confirmed statistically significant reductions in both proteins at 4, 8, and 24 hours postdosing relative to vehicle controls.

化学信息

分子量 349.35
分子式 C17H18F3N5
CAS No. 1884222-37-0

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础