NHC-triphosphate tetrasodium

NHC-triphosphate tetrasodium 是 NHC(MS-P36460)的活性胞内磷酸盐代谢物,以三磷酸盐形式存在,作为病毒聚合酶(viral polymerase)的弱底物替代物,会被并入 HCV 复制子 RNA 中。
NHC-triphosphate tetrasodium
产品编号: MS-W49496 分子式: C9H12N3Na4O15P3 分子量: 587.08
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
询价
5mg
询价
询价

产品描述

NHC-triphosphate tetrasodium 是 NHC(MS-P36460)的活性胞内磷酸盐代谢物,以三磷酸盐形式存在,作为病毒聚合酶(viral polymerase)的弱底物替代物,会被并入 HCV 复制子 RNA 中。

生物实验数据

生物活性 NHC-triphosphate tetrasodium is the active intracellular phosphate metabolite of NHC (MS-P36460), existing as a triphosphate, and serves as a weak substrate surrogate for viral polymerase that is incorporated into HCV replicon RNA.
体外研究
(In Vitro)

In an intracellular metabolism assay, HCV replicon cells are treated with 10 μM 3H-labeled NHC, and intracellular nucleotide levels are determined after 1, 2 and 8 hours incubations. NHC is rapidly convered into the mono-, di-, and triphosphate forms, and NHC-TP reaches up to 71.12 pM after 8 hours.
NHC-triphosphate (NHC-TP) (5-40 μM) absence leads to full-length polymerization products, it can be a weak alternative substrate. In addition, incorporation of NHC-TP instead of CTP increases the molecular weight of the polymerization product by 16 (one extra oxygen) for each event and an obvious electrophoretic shift is observed in cell-free HCV NS5B polymerization reactions.
Huh-7 cells are incubated with (10-50 μM; 4 h) NHC or a McGuigan phosphoramidate prodrug of NHC. Intracellular levels of the parental compounds and phosphorylated metabolites are measured using LC-MS/MS. Small amounts of NHC-monophosphate (MP) and NHC-diphosphate (DP) can be observed, while NHC-triphosphate (MS-K73350) remains the most abundant metabolite.
NHC-triphosphate (NHC-TP) metabolite may directly target the viral polymerase and behave as a nonobligate chain terminator. It plays a prominent role in inhibiting early negative-strand RNA synthesis, either through chain termination or mutagenesis, which may in turn interfere with correct replicase complex formation.

性状 固体
颜色 White to off-white

化学信息

分子量 587.08
分子式 C9H12N3Na4O15P3

储存&溶解度

储存方式

-20°C, sealed storage, away from moisture and light

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

H2O 中的溶解度 : 100 mg/mL (170.33 mM; 超声助溶)

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O1 mM1.7033 mL8.5167 mL17.0335 mL42.5836 mL
5 mM0.3407 mL1.7033 mL3.4067 mL8.5167 mL
10 mM0.1703 mL0.8517 mL1.7033 mL4.2584 mL
15 mM0.1136 mL0.5678 mL1.1356 mL2.8389 mL
20 mM0.0852 mL0.4258 mL0.8517 mL2.1292 mL
25 mM0.0681 mL0.3407 mL0.6813 mL1.7033 mL
30 mM0.0568 mL0.2839 mL0.5678 mL1.4195 mL
40 mM0.0426 mL0.2129 mL0.4258 mL1.0646 mL
50 mM0.0341 mL0.1703 mL0.3407 mL0.8517 mL
60 mM0.0284 mL0.1419 mL0.2839 mL0.7097 mL
80 mM0.0213 mL0.1065 mL0.2129 mL0.5323 mL
100 mM0.0170 mL0.0852 mL0.1703 mL0.4258 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础