FGFR1/VEGFR2-IN-2

FGFR1/VEGFR2-IN-2(compound 6)是一种 VEGFR2/FGFR1 双重抑制剂,对 VEGFR2 和 FGFR1 的 IC50 值分别为 0.025 µM 和 0.026 µM,对 EGFR 和 PDGFR-β 的 IC50 值分别为 0.106 μM 和 0.077 µM,对 NCI-60 细胞系表现出显著抗癌活性(GI=60.38%),在 T-47D 细胞株中 IC50 为 8.51 µM,具有抗迁移作用,可使细胞停滞于 G1 期并促进凋亡和坏死,对 MCF-7 细胞株 IC50 超过 100 µM,对 MDA-MB-231 的 IC50 为 69.17 µM,且对正常细胞无毒性。
FGFR1/VEGFR2-IN-2
产品编号: MS-W32751 分子式: C21H15ClF3NO4S 分子量: 469.86
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

FGFR1/VEGFR2-IN-2(compound 6)是一种 VEGFR2/FGFR1 双重抑制剂,对 VEGFR2 和 FGFR1 的 IC50 值分别为 0.025 µM 和 0.026 µM,对 EGFR 和 PDGFR-β 的 IC50 值分别为 0.106 μM 和 0.077 µM,对 NCI-60 细胞系表现出显著抗癌活性(GI=60.38%),在 T-47D 细胞株中 IC50 为 8.51 µM,具有抗迁移作用,可使细胞停滞于 G1 期并促进凋亡和坏死,对 MCF-7 细胞株 IC50 超过 100 µM,对 MDA-MB-231 的 IC50 为 69.17 µM,且对正常细胞无毒性。

生物实验数据

生物活性 FGFR1/VEGFR2-IN-2 (compound 6) is a dual VEGFR2/FGFR1 inhibitor with IC50 values of 0.025 µM and 0.026 µM against VEGFR2 and FGFR1, respectively, and IC50 values of 0.106 μM and 0.077 µM against EGFR and PDGFR-β, respectively; it exhibits significant anticancer activity against the NCI-60 cell line panel (GI=60.38%), has an IC50 of 8.51 µM in the T-47D cell line, exerts anti-migratory effects, induces G1 phase cell cycle arrest and promotes apoptosis and necrosis, shows an IC50 of over 100 µM in the MCF-7 cell line and an IC50 of 69.17 µM against MDA-MB-231, and is non-toxic to normal cells.
IC50 & Target

FGFR1

0.026 μM (IC50)

VEGFR2

0.025 μM (IC50)

PDGFRβ

0.077 μM (IC50)

FGFR

0.106 μM (IC50)

体外研究
(In Vitro)

FGFR1/VEGFR2-IN-2 (10 μM) 具有抗肿瘤增殖活性,平均 GI 为 60.38%。
FGFR1/VEGFR2-IN-2 对乳腺癌细胞系 T-47D,MCF-7 和 MDA-MB-231 有较好的细胞毒性,对正常细胞 Vero 没有影响。
FGFR1/VEGFR2-IN-2 (10,20 μM) 将 T-47D 细胞阻滞在 G1 期。
FGFR1/VEGFR2-IN-2 (2.12,4.25 μM) 促进 T-47D 细胞早期和晚期细胞凋亡,促进细胞坏死。
FGFR1/VEGFR2-IN-2 (3.7-4.8 μM) 促进细胞坏死,提高了 BAX 和 Caspase-3 的表达,降低了 BCL-2 的表达。
FGFR1/VEGFR2-IN-2 (6 μM;24,48 h) 在 T-47D 中有抗迁移作用。

Cell Cytotoxicity Assay

Cell Line: T-47D, MCF-7, MDA-MB-231, Vero
Concentration: 10 μM
Incubation Time:
Result: Had no cytotoxicity to Vero cells and the IC50 for T-47D was 8.51 μM, the IC50 for MCF-7 was greater than 100 μM, and the IC50 for MDA-MB-231 was 69.17 μM.

Cell Proliferation Assay

Cell Line: NCI-60
Concentration: 10 μM
Incubation Time:
Result: Inhibited lung cancer (NCI-H460), colon cancer (HCC-2998), central nervous system cancer (SF-295), melanoma (UACC-62), ovarian cancer (OVCAR-5), kidney cancer (UO-31), and breast cancer (MDA-MB-231), GI were 89.11%, 81.73%, 82.33%, 97.59%, 81.63%, 87.08% and 82.85%.

Cell Cycle Analysis

Cell Line: T-47D
Concentration: 10, 20 μM
Incubation Time:
Result: Increased the number of T-47D cells in the G1 phase from 60.81% to 72.62%.

Cell Migration Assay

Cell Line: T-47D
Concentration: 6.0 μM
Incubation Time: 0, 24, 48 h
Result: Increased the wound healing rate from 25.2% to 19.8% after 24 hours and from 42.2% to 31.2% after 48 hours.

Apoptosis Analysis

Cell Line: T-47D
Concentration: 2.12, 4.25 μM
Incubation Time:
Result: Increased the early apoptosis rate of T-47D cells by 25% and 20% at 2.12 and 4.25 μM, and the late apoptosis rate by 10% and 16%. At 2.12 μM, the apoptosis rate increased by 8%, and at 4.25 μM, the apoptosis rate increased by 16%. At 2.12 and 4.25 μM, the necrotic cells increased from 5% to 12%.

RT-PCR

Cell Line: T-47D
Concentration: 1/2 × IC50 (T-47D), IC50=8.5 μM
Incubation Time:
Result: Increased the expression level of BAX by 5.82 times, decreased the expression level of BCL-2 by 0.243 times, and increased the expression level of Caspase-3 by 8.2 times.

化学信息

分子量 469.86
分子式 C21H15ClF3NO4S

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础