Microtubule destabilizing agent-3

Microtubule destabilizing agent-3 是 B32B3 (MS-C33576) 的类似物,作为一种微管去稳定剂,它通过去稳定微管并促进有丝分裂阻滞而发挥抗骨髓瘤表型,最终导致细胞死亡,并可诱导 G2/M 期阻滞和 caspase 依赖性细胞凋亡 (apoptosis),可用于多发性骨髓瘤的研究。
Microtubule destabilizing agent-3
产品编号: MS-V95765 分子式: C20H21N5S 分子量: 363.48
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Microtubule destabilizing agent-3 是 B32B3 (MS-C33576) 的类似物,作为一种微管去稳定剂,它通过去稳定微管并促进有丝分裂阻滞而发挥抗骨髓瘤表型,最终导致细胞死亡,并可诱导 G2/M 期阻滞和 caspase 依赖性细胞凋亡 (apoptosis),可用于多发性骨髓瘤的研究。

生物实验数据

生物活性 Microtubule destabilizing agent-3, an analog of B32B3 (MS-C33576), is a microtubule destabilizing agent that exerts its anti-myeloma phenotype by destabilizing microtubules and promoting mitotic arrest, ultimately leading to cell death, and it induces G2/M phase arrest and caspase-dependent apoptosis (apoptosis), making it applicable for research on multiple myeloma.
体外研究
(In Vitro)

Microtubule destabilizing agent-3 (VPR8) (500 nM;24-48 小时) 在 JJN3 细胞系中表现出显著的细胞死亡 (IC50 值约为 190 nM) 和 G2M 期阻滞,并诱导细胞凋亡。
Microtubule destabilizing agent-3 (500 nM;1-24 小时) 上调 G2/M 期和自噬相关信号,并下调 MYC 信号。
Microtubule destabilizing agent-3 (0.25-20 μM;24 小时) 不会降低多发性骨髓瘤细胞中 H2AT120P、EZH2 或 H3K27me3 的水平。Microtubule destabilizing agent-3 在 CETSA 实验中表现出对 DCAF1 的热稳定性增强作用。

Cell Cycle Analysis

Cell Line: JJN3 cells
Concentration: 500 nM
Incubation Time: 24 h, 48 h
Result: Reduced cell viability in multiple myeloma cell lines, with an IC50 of approximately 190 nM.
Induced G2M cell cycle arrest. G2M phase was significantly prolonged, and cells spent more time in G2M before dying.

Apoptosis Analysis

Cell Line: JJN3 cells
Concentration: 500 nM
Incubation Time: 24 h, 48 h
Result: Triggered cell surface phosphatidylserine exposure and accumulation of cells in a sub-G1 peak, features of apoptotic cell death.
体内研究
(In Vivo)

Microtubule destabilizing agent-3 (VPR8) (15 mg/kg,腹腔注射,连续给药 5 天,休息 2 天) 在多发性骨髓瘤和淋巴瘤异种小鼠移植模型中显著延迟了肿瘤进展并提高了生存率。

Animal Model: NOD.Cg-Prkdcscid IL2rgtmIWjl/Szj (NSG) mice bearing JJN3Luc2 myeloma cells
Dosage: 15 mg/kg
Administration: i.p., five daily doses followed by 2 days of rest
Result: Tumor progression was significantly delayed in NSG mice bearing luciferase-tagged JJN3 xenografts and overall survival was significantly prolonged (median 27 days for vehicle vs. 33 days). No overt hematopoietic toxicity was observed, as evidenced by preserved peripheral blood leukocyte and platelet counts and hemoglobin concentration.
Animal Model: Ptprca mice bearing EμMyc lymphoma cells
Dosage: 15 mg/kg
Administration: i.p., five daily doses followed by 2 days of rest
Result: Tumor progression was significantly suppressed in Ptprca mice transplanted with EμMyc lymphoma cells, as indicated by reduced spleen weight, peripheral blood, and nodal tumor burden. Continued treatment (10 days) significantly improved overall survival (median 17 days for vehicle vs. 22 days).

化学信息

分子量 363.48
分子式 C20H21N5S

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础