PROTAC KDM4 degrader-1

PROTAC KDM4 degrader-1 是一种 KDM4 PROTAC 降解剂,可降解 KDM4A-C(DC50 分别为 37.53、39.93 和 49.41 nM)并保留 KDM4D,可诱导食管癌细胞发生细胞周期阻滞、凋亡 (apoptosis) 及抗增殖活性,可用于食管癌的研究(粉色:KDM4A 和 KDM4B 和 KDM4C 配体 (MS-C74321);蓝色:VHL 配体 (MS-R95960);黑色:连接子 (MS-K59328))。
产品编号: MS-V94573 CAS No.: 3102423-10-6 分子式: C56H71N7O8S 分子量: 1002.27
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
询价
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

PROTAC KDM4 degrader-1 是一种 KDM4 PROTAC 降解剂,可降解 KDM4A-C(DC50 分别为 37.53、39.93 和 49.41 nM)并保留 KDM4D,可诱导食管癌细胞发生细胞周期阻滞、凋亡 (apoptosis) 及抗增殖活性,可用于食管癌的研究(粉色:KDM4A 和 KDM4B 和 KDM4C 配体 (MS-C74321);蓝色:VHL 配体 (MS-R95960);黑色:连接子 (MS-K59328))。

生物实验数据

生物活性 PROTAC KDM4 degrader-1 is a KDM4 PROTAC degrader that degrades KDM4A-C with DC50 values of 37.53, 39.93, and 49.41 nM, respectively, while sparing KDM4D; it induces cell cycle arrest, apoptosis, and antiproliferative activity in esophageal cancer cells and can be used for esophageal cancer research (pink: KDM4A and KDM4B and KDM4C ligand (MS-C74321); blue: VHL ligand (MS-R95960); black: linker (MS-K59328)).
IC50 & Target

KDM4A

37.53 nM (DC50)

KDM4B

39.93 nM (DC50)

KDM4C

49.41 nM (DC50)

体外研究
(In Vitro)

PROTAC KDM4 degrader-1 (Compound 11) (50 nM; 24 h) 可通过蛋白酶体依赖、Neddylation 依赖、VHL 依赖的泛素-蛋白酶体途径机制介导 KYSE-150 食管癌细胞中 KDM4A 的降解。
PROTAC KDM4 degrader-1 (12.3-1000 nM; 24 h) 可在处理 24 小时后以剂量依赖方式上调 KYSE-150 食管癌细胞中的 H3K36me3 水平,证实了其靶标结合活性。
PROTAC KDM4 degrader-1 (0.0001-10 μM; 7 days) 可强效抑制 KYSE-150 食管癌细胞的增殖,其 IC50 为 16 nM。
PROTAC KDM4 degrader-1 (12.3-1000 nM; 24 h) 可在处理 24 h 后诱导 KYSE-150 食管癌细胞和 MOLT-4 T 淋巴母细胞发生 G0/G1 期细胞周期阻滞。
PROTAC KDM4 degrader-1 (12.3-1000 nM; 72 h) 经 72 h 处理后,可剂量依赖性地诱导 KYSE-150 食管癌细胞和 MOLT-4 T 淋巴母细胞发生凋亡;在 1000 nM 浓度下,KYSE-150 细胞的早期凋亡率为 29%,晚期凋亡率为 48%。

Western Blot Analysis

Cell Line: KYSE-150 esophageal cancer cells
Concentration: 50 nM (with 2 h pre-treatment of 10 μM bortezomib, 1 μM MLN4924, or 5 μM Ac-VHL-Me)
Incubation Time: 24 h
Result: Had its induced degradation of KDM4A attenuated by pre-treatment with bortezomib, MLN4924, or Ac-VHL-Me.
Increased the ubiquitination level of KDM4A compared to DMSO control at 50 nM for 24 h.

Western Blot Analysis

Cell Line: KYSE-150 esophageal cancer cells
Concentration: 12.3 nM, 37 nM, 111.1 nM, 333.3 nM, 1000 nM
Incubation Time: 24 h
Result: Induced a dose-dependent increase in H3K36me3 levels.
Increased H3K36me3 levels to approximately two-fold higher than the DMSO control at 1000 nM for 24 h.

Cell Cycle Analysis

Cell Line: KYSE-150 esophageal cancer cells, MOLT-4 T lymphoblast cells
Concentration: 12.3 nM, 37 nM, 111.1 nM, 333.3 nM, 1000 nM
Incubation Time: 24 h
Result: Increased the G0/G1-phase population in KYSE-150 cells from 65% (DMSO control) to 74% at 1000 nM for 24 h.
Induced similar G0/G1-phase arrest in MOLT-4 cells.

Apoptosis Analysis

Cell Line: KYSE-150 esophageal cancer cells, MOLT-4 T lymphoblast cells
Concentration: 12.3 nM, 37 nM, 111.1 nM, 333.3 nM, 1000 nM
Incubation Time: 72 h
Result: Induced dose-dependent apoptosis in KYSE-150 cells, with obvious apoptosis observed at 12.3 nM.
Reached 29% early-stage apoptosis and 48% late-stage apoptosis in KYSE-150 cells at 1000 nM for 72 h.
Induced similar apoptotic effects in MOLT-4 cells.

化学信息

分子量 1002.27
分子式 C56H71N7O8S
CAS No. 3102423-10-6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础