Braco-19 是一种有效的端粒酶/端粒 (telomerase/telomere) 抑制剂,可防止端粒酶的催化作用,作为四联体 (GQ) 结合配体稳定 GQ 四联体在 3V 端粒 DNA 处的形成,并可导致快速衰老或选择性细胞死亡,同时也是一种 HAdV 病毒复制抑制剂。
产品编号: MS-V92649 纯度: 98.01% CAS No.: 351351-75-2 分子式: C35H43N7O2 分子量: 593.76
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

Braco-19 是一种有效的端粒酶/端粒 (telomerase/telomere) 抑制剂,可防止端粒酶的催化作用,作为四联体 (GQ) 结合配体稳定 GQ 四联体在 3V 端粒 DNA 处的形成,并可导致快速衰老或选择性细胞死亡,同时也是一种 HAdV 病毒复制抑制剂。

生物实验数据

生物活性 Braco-19 is a potent telomerase/telomere inhibitor that prevents the catalytic action of telomerase, acts as a G-quadruplex (GQ)-binding ligand to stabilize GQ quadruplex formation at the 3V telomeric DNA, and can induce rapid senescence or selective cell death, and it is also an inhibitor of HAdV viral replication.
IC50 & Target

IC50: telomerase/telomere

体外研究
(In Vitro)

Braco-19, as a well-known GQ binding ligand, interacts specifically with the HAdV GQs and increases their stability, and blocks the HAdV multiplication.
BRACO-19 (1.0-10 μM; 5 day) cause zero growth inhibition is found 1 μM, the IC50 for BRACO-19 in UXF1138L cells is 2.5 μM, the IC100 is 5 μM.
BRACO-19 (1 μM; 24 hours) shows dramatically reduced nuclear hTERT expression. However, residual cytoplasmic hTERT staining is observed accompanied by the occurrence of atypical mitoses.
BRACO-19 (0-40 μM; 24 hours) decreases the AdV virus growth in a dose-dependent manner in eGFP-transinfected HEK 293 cells.
BRACO-19 (0-150 μM; 24 hours) shows a decrease in band intensity in an increasing concentration-dependent manner.

Cell Viability Assay

Cell Line: HEK 293 cells
Concentration: 20 μM; 40 μM
Incubation Time: 24 hours
Result: Displayed low cytotoxicity and decreased the eGFP fluorescence.
体内研究
(In Vivo)

BRACO-19 (oral administration or intraperitoneal injection; 2 or 5 mg/kg; 3 weeks) oral dosing regimen are always inactive and the animals have to be sacrificed due to high tumor burden before overall termination of the study, Chronic, i.p. BRACO-19 administration, qdx5 is efficient in inhibiting tumor growth in earlystage xenografts but not advanced-stage xenografts.
BRACO-19 (intraperitoneal injection; 2 mg/kg; 3 weeks; starting 6 days after transplantation of UXF1138LX fragments) inhibits tumor growth significantly and under these conditions, marked single-agent antitumor activity is observed, with some animals in the group showing complete regressions (5 of 12 tumors).

Animal Model: Established UXF1138LX Xenografts in nude mice
Dosage: 2 mg/kg
Administration: Intraperitoneal injection; 3 weeks; starting 6 days after transplantation of UXF1138LX fragments
Result: Showed partial tumor regressions with an optimal T/C on day 28 of 4.1%, equal to 95.9% inhibition of tumor growth compared with control.
性状 固体
颜色 Brown to orange

化学信息

分子量 593.76
分子式 C35H43N7O2
CAS No. 351351-75-2

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (3.37 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 33.33 mg/mL (56.13 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.6842 mL8.4209 mL16.8418 mL42.1046 mL
5 mM0.3368 mL1.6842 mL3.3684 mL8.4209 mL
10 mM0.1684 mL0.8421 mL1.6842 mL4.2105 mL
15 mM0.1123 mL0.5614 mL1.1228 mL2.8070 mL
20 mM0.0842 mL0.4210 mL0.8421 mL2.1052 mL
25 mM0.0674 mL0.3368 mL0.6737 mL1.6842 mL
30 mM0.0561 mL0.2807 mL0.5614 mL1.4035 mL
40 mM0.0421 mL0.2105 mL0.4210 mL1.0526 mL
50 mM0.0337 mL0.1684 mL0.3368 mL0.8421 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础