Milatuzumab

Synonyms: 米拉组单抗; hLL1; MEDI-115
Milatuzumab(hLL1;MEDI-115)是一种人源化抗 CD74 单克隆抗体,而 CD74 是一种与促进 B 细胞生长和存活有关的完整膜蛋白,Milatuzumab 可导致自由基氧的产生和线粒体膜电位的丧失,并降低 CD20/CD74 聚集体和细胞粘附,从而导致细胞死亡。
产品编号: MS-V82463 纯度: 99.39% CAS No.: 899796-83-9
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价

产品描述

Milatuzumab(hLL1;MEDI-115)是一种人源化抗 CD74 单克隆抗体,而 CD74 是一种与促进 B 细胞生长和存活有关的完整膜蛋白,Milatuzumab 可导致自由基氧的产生和线粒体膜电位的丧失,并降低 CD20/CD74 聚集体和细胞粘附,从而导致细胞死亡。

生物实验数据

生物活性 Milatuzumab (hLL1; MEDI-115) is a humanized anti-CD74 monoclonal antibody, and CD74 is an integral membrane protein associated with promoting B-cell growth and survival; Milatuzumab induces the production of reactive oxygen species and the loss of mitochondrial membrane potential, and also reduces CD20/CD74 aggregates and cell adhesion, thereby leading to cell death.
IC50 & Target

CD74

体外研究
(In Vitro)

Milatuzumaba(5 μg/mL;8-48 小时)增强 MCL 细胞系和原发性患者肿瘤细胞的细胞死亡。
Milatuzumaba(5 μg/mL;0.5-2 h)在 Jeko、Mino 和 SP-53 细胞中介导细胞毒性,部分取决于 ROS 的产生和线粒体跨膜电位的丧失。
Milatuzumaba(5 μg/mL;4 小时)抑制 NF-κB 通路并诱导细胞凋亡,凋亡机制与 caspase 裂解、Bcl-2 家族成员失调或诱导自噬无关。

Western Blot Analysis

Cell Line: Jeko and Mino cells
Concentration: 5 μg/mL
Incubation Time: 4 hours
Result: Insignificant down-regulation of antiapoptotic proteins, such as Bax, Bcl-2, Bcl-xL, and Mcl-1.

Cell Viability Assay

Cell Line: MCL cell lines and primarypatient tumor cells
Concentration: 5 μg/mL
Incubation Time: 8, 24, and 48 hours
Result: Resulted in cell death of Jeko, Mino, SP-53, Rec-1, HBL-2, and Granta cells.

Immunofluorescence

Cell Line: Jeko, Mino, and SP-53 cells
Concentration: 5 μg/mL; with or without 10 mM N-acetylcysteine (MS-L91063) for 1.5 h
Incubation Time: 0.5, 1, 1.5, and 2 hours
Result: Increased ROS generation as early as 0.5 hours, while peaking at 1 to 1.5 hours and reducing at 2 hours.Therefore, it resulted cell death, but reserved by nonspecific ROS scavenger.
体内研究
(In Vivo)

Milatuzumaba(15 mg/kg/天;腹腔注射;每 3 天一次)显着提高携带 Jeko 癌细胞的雌性 SCID 小鼠的存活率。并且Milatuzumaba与Rituximab (MS-Q15663) 在该小鼠模型中具有协同作用。

Animal Model: Jeko mouse model
Dosage: 15 mg/kg/day; with or without 15 mg/kg Rituximab
Administration: Intraperitoneal injection; once every 3 days, starting at day 15 after engraftment
Result: Resulted the mean survival for the combination treated group of 44.5 days, compared with 33.5 days for Milatuzumaba treated, 28 days for control.
Clinical Trial
NCT NumberSponsorConditionStart DatePhase
NCT01663766Gilead Sciences|Ohio State University
GVHD (Acute or Chronic)|Acute Myeloid or Lymphoblastic Leukemia (AML or ALL)|Myelodysplastic Syndrome|Chronic Myelogenous Leukemia (CML)|Multiple Myeloma (MM)|Non-Hodgekin Lymphoma (NHL-both Follicular & Diffuse Large Cell)|Chronic Lymphocytic Leukemia or Small Lymphocytic Leukemia (CLL or SLL)
2013-12PHASE1
NCT01845740Gilead Sciences|United States Department of Defense
Lupus Erythematosus, Cutaneous|Lupus Erythematosus, Discoid|Lupus Erythematosus, Systemic|Lupus Vasculitis, Central Nervous System|Lupus Nephritis
2007-01PHASE1
NCT00421525Gilead Sciences
Multiple Myeloma|Myeloma, Plasma-Cell|PLASMACYTOMA
2007-01PHASE1|PHASE2
性状 液体
颜色 Colorless to light yellow

化学信息

CAS No. 899796-83-9
别名 米拉组单抗; hLL1; MEDI-115

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Shipping with dry ice.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础