MS8847 是一种靶向 EZH2 的 PROTAC 降解剂和抗增殖剂(在 EOL-1 MLL-rAML 细胞中 DC50=34.4 nM),它招募 E3 连接酶 von Hippel-Lindau (VHL),通过泛素-蛋白酶体系统介导 EZH2 降解,在 MLL 重排的急性髓系白血病细胞中诱导抗增殖效应,并抑制三阴性乳腺癌细胞系或 3D 三阴性乳腺癌模型的生长,可用于 MLL 重排急性髓系白血病和三阴性乳腺癌的相关研究(粉色:EZH2 配体 (MS-Y58546);蓝色:VHL 配体 (MS-L68940);黑色:连接子 (MS-F00866))。
产品编号: MS-V81927 纯度: 99.78% CAS No.: 3050872-59-5 分子式: C70H98N10O8S 分子量: 1239.65
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

MS8847 是一种靶向 EZH2 的 PROTAC 降解剂和抗增殖剂(在 EOL-1 MLL-rAML 细胞中 DC50=34.4 nM),它招募 E3 连接酶 von Hippel-Lindau (VHL),通过泛素-蛋白酶体系统介导 EZH2 降解,在 MLL 重排的急性髓系白血病细胞中诱导抗增殖效应,并抑制三阴性乳腺癌细胞系或 3D 三阴性乳腺癌模型的生长,可用于 MLL 重排急性髓系白血病和三阴性乳腺癌的相关研究(粉色:EZH2 配体 (MS-Y58546);蓝色:VHL 配体 (MS-L68940);黑色:连接子 (MS-F00866))。

生物实验数据

生物活性 MS8847 is an EZH2-targeting PROTAC degrader and antiproliferative agent (DC50=34.4 nM in EOL-1 MLL-rAML cells) that recruits the E3 ligase von Hippel-Lindau (VHL) to mediate EZH2 degradation via the ubiquitin-proteasome system, induces antiproliferative effects in MLL-rearranged acute myeloid leukemia cells, and inhibits the growth of triple-negative breast cancer cell lines or 3D triple-negative breast cancer models, and can be used for research related to MLL-rearranged acute myeloid leukemia and triple-negative breast cancer (pink: EZH2 ligand (MS-Y58546); blue: VHL ligand (MS-L68940); black: linker (MS-F00866)).
IC50 & Target

VHL

 

EZH2

 

体外研究
(In Vitro)

MS8847 可选择性靶向依赖 EZH2 的细胞生长,抑制三阴性乳腺癌 (TNBC) 细胞增殖,5 d 的 IC50 分别为 1.45 μM (BT549) 和 0.45 μM (MDA-MB-468);并抑制 MLL-r AML 细胞系的增殖,5 d 的 IC50 分别为 0.11 μM (EOL-1)、0.17 μM (MV4;11) 和 0.41 μM (RS4;11)。
MS8847 (0.1-1 μM; 24 h) 可在 EOL-1 MLL-r AML 细胞中完全降解 EZH2 蛋白。
MS8847 (1 nM-0.3 μM; 24 h) 可在 EOL-1 MLL-rAML 细胞中以浓度依赖的方式强效降解 EZH2,DC50 为 34.4 nM,同时还可降解 EED 和 SUZ12。
MS8847 (2.5-20 μM; 5 d) 可在 3D 体外 BT549 TNBC 模型中显著抑制细胞生长并减小球状体大小。

Western Blot Analysis

Cell Line: EOL-1 (MLL-r AML cell line)
Concentration: 1-1000 nM; 0.03-0.3 μM
Incubation Time: 24 h
Result: Achieved a half-maximal degradation concentration (DC50) of 34.4 nM for EZH2.
Potently degraded PRC2 core component EED, and degraded SUZ12 to a lesser extent.
Reduced the H3K27me3 mark.

Western Blot Analysis

Cell Line: EOL-1 (MLL-r AML cell line)
Concentration: 300 nM
Incubation Time: 2 h; 4 h; 8 h; 12 h; 24 h; 48 h
Result: Initiated EZH2 degradation at 8 h and reached maximum degradation by 24 h.
Reduced the H3K27me3 mark over time.

Western Blot Analysis

Cell Line: EOL-1 (MLL-r AML cell line)
Concentration: 0.03-0.3 μM (direct treatment); 0.5 μM (post 2 h pre-incubation with inhibitors/ligands)
Incubation Time: 24 h (direct treatment); 24 h (post 2 h pre-incubation with inhibitors/ligands)
Result: Effectively induced EZH2 degradation at 0.03, 0.1, 0.3 μM.
Rescued EZH2 degradation induction via pre-treatment with MLN4942, EPZ-6438, or VHL-1.
Failed to induce EZH2 degradation with negative controls MS8847N1 and MS8847N2.

Western Blot Analysis

Cell Line: EOL-1, MV4;11, RS4;11 (MLL-r AML cell lines)
Concentration: 0.03-0.3 μM
Incubation Time: 24 h
Result: Induced complete EZH2 degradation at 0.1 and 0.3 μM in EOL-1 cells.
Induced near-complete EZH2 degradation at 0.03, 0.1, 0.3 μM in MV4;11 cells.
Induced EZH2 degradation at 0.1 and 0.3 μM in RS4;11 cells.

Western Blot Analysis

Cell Line: BT549, MDA-MB-468 (TNBC cell lines)
Concentration: 0.1-3 μM
Incubation Time: 48 h
Result: Induced potent EZH2 degradation in both BT549 and MDA-MB-468 cells following 48 h treatment.
体内研究
(In Vivo)

MS8847 (50 mg/kg; i.p.; 单剂量) 在雄性瑞士白化小鼠体内可达到持续的血浆浓度,且单次 50 mg/kg 腹腔注射后耐受性良好。

Animal Model: Swiss Albino (male)
Dosage: 50 mg/kg
Administration: i.p.; single dose
Result: Observed a maximum plasma concentration (Cmax) of 3.9 μM at 4 hours.
Retained over 1 μM in plasma at 9 hours.
Exhibited no obvious clinical signs of toxicity at the tested dose.
性状 固体
颜色 White to off-white

化学信息

分子量 1239.65
分子式 C70H98N10O8S
CAS No. 3050872-59-5

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (80.67 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM0.8067 mL4.0334 mL8.0668 mL20.1670 mL
5 mM0.1613 mL0.8067 mL1.6134 mL4.0334 mL
10 mM0.0807 mL0.4033 mL0.8067 mL2.0167 mL
15 mM0.0538 mL0.2689 mL0.5378 mL1.3445 mL
20 mM0.0403 mL0.2017 mL0.4033 mL1.0083 mL
25 mM0.0323 mL0.1613 mL0.3227 mL0.8067 mL
30 mM0.0269 mL0.1344 mL0.2689 mL0.6722 mL
40 mM0.0202 mL0.1008 mL0.2017 mL0.5042 mL
50 mM0.0161 mL0.0807 mL0.1613 mL0.4033 mL
60 mM0.0134 mL0.0672 mL0.1344 mL0.3361 mL
80 mM0.0101 mL0.0504 mL0.1008 mL0.2521 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础