STAT3-IN-53(Compound L20)是一种 Kd 为 6.16 μM 的 STAT3 抑制剂,可直接结合 STAT3 的 SH2 结构域,抑制 Y705 位点磷酸化而不影响总 STAT3 蛋白水平,下调 Cyclin-D1 和 c-Myc 的转录与表达,诱导细胞周期阻滞并促进细胞凋亡(Apoptosis),对结直肠癌具有抗癌活性。
产品编号: MS-V62719 CAS No.: 3113051-34-3 分子式: C33H33F3N8O3S 分子量: 678.73
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

STAT3-IN-53(Compound L20)是一种 Kd 为 6.16 μM 的 STAT3 抑制剂,可直接结合 STAT3 的 SH2 结构域,抑制 Y705 位点磷酸化而不影响总 STAT3 蛋白水平,下调 Cyclin-D1 和 c-Myc 的转录与表达,诱导细胞周期阻滞并促进细胞凋亡(Apoptosis),对结直肠癌具有抗癌活性。

生物实验数据

生物活性 STAT3-IN-53 (Compound L20) is a STAT3 inhibitor with a Kd of 6.16 μM that directly binds to the SH2 domain of STAT3, inhibits phosphorylation at Y705 without affecting total STAT3 protein levels, downregulates the transcription and expression of Cyclin-D1 and c-Myc, induces cell cycle arrest and promotes apoptosis, and exhibits anticancer activity against colorectal cancer.
IC50 & Target STAT3:6.16 μM (Kd)
体外研究
(In Vitro)

STAT3-IN-53 可直接与重组全长野生型 STAT3 蛋白结合,其 Kd 值为 6.16 μM。
STAT3-IN-53 可在 HEK-BLUE-IL6 细胞中强效抑制 IL-6/JAK/STAT3 信号通路,其 IC50 为 0.89 μM。
STAT3-IN-53 (96 h) 可强效抑制 HCT116、HT29、SW480、MC38 和 CT26 结直肠癌细胞系的增殖,其中对 HCT116 细胞的活性最强 (IC50 = 0.45 μM)。

Cell Proliferation Assay

Cell Line: HCT116, HT29, SW480, MC38, CT26 colorectal cancer cell lines
Concentration: concentration gradient (for IC50 determination)
Incubation Time: 96 h
Result: Exhibited potent antiproliferative activity across all tested colorectal cancer cell lines, with IC50 values of 0.45 ± 0.05 μM (HCT116), 1.80 ± 0.10 μM (HT29), 9.34 ± 0.79 μM (SW480), 2.33 ± 0.48 μM (MC38), and 5.14 ± 0.84 μM (CT26).

Western Blot Analysis

Cell Line: HCT116 cells
Concentration: 0.5, 2.5 μM
Incubation Time: 24 h
Result: Dose-dependently suppressed STAT3 phosphorylation at the Y705 residue without altering total STAT3 protein levels.
Did not inhibit phosphorylation of STAT6 or SRC.
Dose-dependently downregulated cyclin-D1 expression.
体内研究
(In Vivo)

STAT3-IN-53 (5-20 mg/kg;腹腔注射;每日一次;12 天) 可在 C57BL/6J 小鼠中对皮下 MC38 结肠腺癌的生长呈现剂量依赖性抑制。

Animal Model: C57BL/6J (male, SPF grade, 18-20 g, subcutaneous implantation of MC38 colon adenocarcinoma tumor fragments)
Dosage: 5 mg/kg; 20 mg/kg
Administration: i.p.; once daily; 12 days
Result: Achieved a tumor growth inhibition (TGI) rate of 53.6% at 5 mg/kg.
Achieved a tumor growth inhibition (TGI) rate of 59.8% at 20 mg/kg.
Suppressed STAT3 Y705 phosphorylation in tumor tissues at 20 mg/kg.
Downregulated Cyclin-D1 and c-Myc protein expression in tumor tissues at 20 mg/kg.
Caused no treatment-related adverse events or body weight loss exceeding 10% during the 12-day dosing period.

化学信息

分子量 678.73
分子式 C33H33F3N8O3S
CAS No. 3113051-34-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础