PIM-1/HDAC-IN-2

PIM-1/HDAC-IN-2 是一种高效的 PIM/HDAC 抑制剂,对 MV4-11 细胞的 IC50 值为 0.11 μM,通过抑制 PIM1 激酶和选择性抑制 HDAC6 的双重机制发挥协同抗增殖作用,能诱导细胞凋亡 (apoptosis),显著诱导 PARP 裂解,从而促使细胞周期停滞在 G1 期并减少 S 期细胞,且在 MV4-11 肿瘤移植模型中显示出显著的抗癌效果而无明显毒性。
产品编号: MS-V47194 CAS No.: 3103925-33-0 分子式: C34H37N7O4 分子量: 607.70
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PIM-1/HDAC-IN-2 是一种高效的 PIM/HDAC 抑制剂,对 MV4-11 细胞的 IC50 值为 0.11 μM,通过抑制 PIM1 激酶和选择性抑制 HDAC6 的双重机制发挥协同抗增殖作用,能诱导细胞凋亡 (apoptosis),显著诱导 PARP 裂解,从而促使细胞周期停滞在 G1 期并减少 S 期细胞,且在 MV4-11 肿瘤移植模型中显示出显著的抗癌效果而无明显毒性。

生物实验数据

生物活性 PIM-1/HDAC-IN-2 is a highly potent PIM/HDAC inhibitor with an IC50 value of 0.11 μM against MV4-11 cells that exerts synergistic antiproliferative effects through a dual mechanism of PIM1 kinase inhibition and selective HDAC6 inhibition, induces apoptosis, markedly induces PARP cleavage, thereby promoting G1 phase cell cycle arrest with a reduction in S phase cells, and demonstrates significant anticancer efficacy without obvious toxicity in an MV4-11 tumor xenograft model.
IC50 & Target

PIM1

2.6 nM (IC50)

HDAC6

8 nM (IC50)

HDAC1

41 nM (IC50)

HDAC10

72 nM (IC50)

HDAC3

101 nM (IC50)

HDAC11

105 nM (IC50)

HDAC8

225 nM (IC50)

HDAC2

341 nM (IC50)

HDAC5

379 nM (IC50)

HDAC7

690 nM (IC50)

HDAC9

1084 nM (IC50)

HDAC4

3456 nM (IC50)

体外研究
(In Vitro)

PIM-1/HDAC-IN-2 (96 h) 展现出对多种肿瘤细胞的毒性,其 IC50 值分别为:0.11 μM (MV4-11),3.56 μM (MOLM-13),1.71 μM (RPMI 8226),7.09 μM (MM.1S)。

PIM-1/HDAC-IN-2 (0.1-1 μM, 48 h) 显著增强 MV4-11 细胞中的 PARP 裂解,且具有浓度依赖性。

PIM-1/HDAC-IN-2 (0.1-1 μM, 48 h) 在 MV4-11 细胞中显示出显著的诱导细胞凋亡能力。

PIM-1/HDAC-IN-2 (0.1-1 μM, 48 h) 诱导 MV4-11 细胞周期在 G1 期发生浓度依赖性阻滞,同时 S 期细胞数量减少。

Apoptosis Analysis

Cell Line: MV4-11 cells
Concentration: 0.1, 0.3, 1 μM
Incubation Time: 48 h
Result: Demonstrated a significantly superior apoptosis-inducing capability (92.4%) compared to C28 (20.2%), a slightly enhanced effect relative to SAHA (89.2%), and was comparable to C28 + SAHA (0.5 + 0.5 μM) (94.8%) at 1 μM.

Cell Cycle Analysis

Cell Line: MV4-11 cells
Concentration: 0.1, 0.3, 1 μM
Incubation Time: 48 h
Result: Induced the concentration-dependent arrest of the cell cycle in G1 phase.
Reduced the number of cells in S phase.
体内研究
(In Vivo)

PIM-1/HDAC-IN-2 (50 mg/kg,25 mg/kg,腹腔注射,连续 21 天) 在 MV4-11 肿瘤移植模型中显示出良好的抗肿瘤效果和耐受性。

Animal Model: MV4-11 xenograft model established in female BALB/c-Nude mice (6-8 weeks).
Dosage: 50 mg/kg, 25 mg/kg
Administration: Daily intraperitoneal injection (i.p.), at the corresponding doses for 21 days.
Result: Showed TGI values of 81.3% (50 mg/kg) and 45.9% (25 mg/kg).
Exhibited superior in vivo antitumor activity over the positive control C28 and SAHA at the same dose.
Had no significant weight loss or toxic effects.
Induced necrosis of MV4-11 tumor tissues but showed no apparent toxicity of heart, liver, spleen, lungs, and kidneys (H&E staining).
Resulted in the significant PARP cleavage, compared to the positive control C28 and SAHA at the same dose.

化学信息

分子量 607.70
分子式 C34H37N7O4
CAS No. 3103925-33-0

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础