c-Met/HDAC-IN-2

c-Met/HDAC-IN-2 是一种高效的 c-Met 和 HDAC 双重抑制剂,对 HDAC1 和 c-Met 的 IC50 分别为 18.49 nM 和 5.40 nM,对多种癌细胞具有抗增殖活性,可将 HCT-116 细胞周期阻滞于 G2/M 期并诱导细胞凋亡 (apoptosis),可用于抗癌耐药研究。
产品编号: MS-V35085 CAS No.: 2740495-53-6 分子式: C34H33N5O7 分子量: 623.66
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

c-Met/HDAC-IN-2 是一种高效的 c-Met 和 HDAC 双重抑制剂,对 HDAC1 和 c-Met 的 IC50 分别为 18.49 nM 和 5.40 nM,对多种癌细胞具有抗增殖活性,可将 HCT-116 细胞周期阻滞于 G2/M 期并诱导细胞凋亡 (apoptosis),可用于抗癌耐药研究。

生物实验数据

生物活性 c-Met/HDAC-IN-2 is a potent dual inhibitor of c-Met and HDAC with IC50 values of 18.49 nM for HDAC1 and 5.40 nM for c-Met, exhibits antiproliferative activity against several cancer cell lines, induces G2/M phase cell cycle arrest and apoptosis (apoptosis) in HCT-116 cells, and can be used for research on anticancer drug resistance.
IC50 & Target HDAC1:18.49 nM
体外研究
(In Vitro)

c-Met/HDAC-IN-2 (compound 14X) (0-20 μM; 72 hours) exhibits antiproliferative activities against HCT-116, MCF-7 and A549.
c-Met/HDAC-IN-2 (0.2-5 μM; 48 hours) induces of cancer cell apoptosis in a dose-dependent manner.
c-Met/HDAC-IN-2 (0.2-5 μM; 48 hours) significantly causes G2/M-phase arrest in HCT-116 cells in a dose dependent manner.

Cell Proliferation Assay

Cell Line: HCT-116, MCF-7 and A549
Concentration: 0-20 μM
Incubation Time: 72 hours
Result: Exhibited antiproliferative activities against HCT-116, MCF-7 and A549 with IC50s of 0.22 ± 0.09 μM, 1.59 ± 0.06 μM and 0.22 ± 0.04 μM, respectively.

Apoptosis Analysis

Cell Line: HTC-116
Concentration: 0.2, 1 and 5 μM
Incubation Time: 48 hours
Result: The percentage of apoptotic cells was 4.19%, 11.53% and 21.48% at 0.2 μM, 1.0 μM and 5.0 μM, respectively.

Cell Cycle Analysis

Cell Line: HTC-116
Concentration: 0.2, 1 and 5 μM
Incubation Time: 48 hours
Result: Significantly caused G2/M-phase arrest in HCT-116 cells in a dose dependent manner.

化学信息

分子量 623.66
分子式 C34H33N5O7
CAS No. 2740495-53-6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础