Paeonolide

Synonyms: 丹皮酚原苷
Paeonolide 是一种存在于牡丹 (Paeonia suffruticosa) 中的 ERK1/2 激活剂,可促进成骨细胞的早期和晚期分化、刺激前成骨细胞迁移,并激活 BMP-Smad1/5/8、Wnt-β-catenin、JNK 及 p38 信号通路,可用于骨质疏松症和牙周炎的相关研究。
产品编号: MS-U78822 纯度: 99.89% CAS No.: 72520-92-4 分子式: C20H28O12 分子量: 460.43
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
2mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

Paeonolide 是一种存在于牡丹 (Paeonia suffruticosa) 中的 ERK1/2 激活剂,可促进成骨细胞的早期和晚期分化、刺激前成骨细胞迁移,并激活 BMP-Smad1/5/8、Wnt-β-catenin、JNK 及 p38 信号通路,可用于骨质疏松症和牙周炎的相关研究。

生物实验数据

生物活性 Paeonolide, found in Paeonia suffruticosa, is an ERK1/2 activator that promotes early and late osteoblast differentiation, stimulates pre-osteoblast migration, and activates the BMP-Smad1/5/8, Wnt-β-catenin, JNK, and p38 signaling pathways, and can be used for research related to osteoporosis and periodontitis.
IC50 & Target

ERK1

 

ERK2

 

体外研究
(In Vitro)

Paeonolide (0.1-100 µM; 24 h) 不影响 MC3T3-E1 前成骨细胞的活力或增殖。
Paeonolide (1-30 µM; 24 h) 以剂量依赖的方式增强氧化应激 (OS) 诱导的 MC3T3-E1 前成骨细胞的伤口愈合迁移能力。
Paeonolide (1-30 µM; 7 days) 以剂量依赖的方式促进氧化应激诱导的 MC3T3-E1 前成骨细胞的早期成骨分化,这可通过 ALP 染色及活性的增强得到验证。
Paeonolide (1-30 µM; 14 days) 以剂量依赖的方式促进氧化应激诱导的 MC3T3-E1 前成骨细胞的晚期成骨细胞分化及矿化结节形成,这一点可通过增强的 ARS 染色及成骨细胞特异性基因表达得到验证。
Paeonolide (1-10 µM; 24 h) 可激活氧化应激 (OS) 诱导的 MC3T3-E1 前成骨细胞中的 BMP-Smad1/5/8、Wnt-β-catenin 和 MAPK (ERK1/2、JNK、p38) 信号通路,其对 ERK1/2 磷酸化的作用占主导地位。

Cell Viability Assay

Cell Line: MC3T3-E1 pre-osteoblasts
Concentration: 0.1, 1, 10, 30, and 100 µM
Incubation Time: 24 h
Result: Showed no cytotoxic or proliferative effects across all tested concentrations, with cell viability remaining near 100% relative to untreated controls.

Cell Migration Assay

Cell Line: OS-induced MC3T3-E1 pre-osteoblasts
Concentration: 1, 10, 30 µM
Incubation Time: 24 h
Result: Promoted wound healing in a dose-dependent manner.
Showed statistically significant increases compared to OS-only controls at all concentrations.

Cell Differentiation Assay

Cell Line: OS-induced MC3T3-E1 pre-osteoblasts
Concentration: 1, 10, 30 µM
Incubation Time: 7 days
Result: Promoted early osteoblast differentiation in a dose-dependent manner, with increased ALP staining intensity and ALP-positive cell counts observed via microscopy.
Showed statistically significant increases compared to OS-only controls at all concentrations.

Western Blot Analysis

Cell Line: OS-induced MC3T3-E1 pre-osteoblasts
Concentration: 1, 10 µM
Incubation Time: 24 h
Result: Increased BMP2 protein expression and phosphorylation of Smad1/5/8 in a dose-dependent manner.
Enhanced Wnt3a protein expression, phosphorylation of GSK3β, and β-catenin protein levels in a dose-dependent manner.
Increased phosphorylation of ERK1/2, JNK, and p38 in a dose-dependent manner.
Promoted phosphorylation of ERK1/2 to a greater extent than BMP2 (100 ng/mL) treatment.
性状 固体
颜色 White to off-white

化学信息

分子量 460.43
分子式 C20H28O12
CAS No. 72520-92-4
别名 丹皮酚原苷

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (4.34 mM), Sonication is recommended.
10% DMSO+90% Saline: 10 mg/mL (21.72 mM), Solution.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, protect from light

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (217.19 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.1719 mL10.8594 mL21.7188 mL54.2971 mL
5 mM0.4344 mL2.1719 mL4.3438 mL10.8594 mL
10 mM0.2172 mL1.0859 mL2.1719 mL5.4297 mL
15 mM0.1448 mL0.7240 mL1.4479 mL3.6198 mL
20 mM0.1086 mL0.5430 mL1.0859 mL2.7149 mL
25 mM0.0869 mL0.4344 mL0.8688 mL2.1719 mL
30 mM0.0724 mL0.3620 mL0.7240 mL1.8099 mL
40 mM0.0543 mL0.2715 mL0.5430 mL1.3574 mL
50 mM0.0434 mL0.2172 mL0.4344 mL1.0859 mL
60 mM0.0362 mL0.1810 mL0.3620 mL0.9050 mL
80 mM0.0271 mL0.1357 mL0.2715 mL0.6787 mL
100 mM0.0217 mL0.1086 mL0.2172 mL0.5430 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础