Capreomycin sulfate

Synonyms: 硫酸卷曲霉素
Capreomycin sulfate 是一种大环肽类抗生素,可抑制分枝杆菌核糖体转译中苯丙氨酸的合成,具有抗淀粉样变性和促纤维分解活性,通过抑制淀粉样蛋白纤颤的发生来降低淀粉样蛋白诱导的细胞毒性,可用于耐多药结核病、2 型糖尿病、阿尔茨海默病和帕金森病的研究。
产品编号: MS-U73719 纯度: 99.0% CAS No.: 1405-37-4
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
500mg
询价
3-5 天
1g
询价
3-5 天
5g
询价
3-5 天
10g
询价
询价
50g
询价
询价

产品描述

Capreomycin sulfate 是一种大环肽类抗生素,可抑制分枝杆菌核糖体转译中苯丙氨酸的合成,具有抗淀粉样变性和促纤维分解活性,通过抑制淀粉样蛋白纤颤的发生来降低淀粉样蛋白诱导的细胞毒性,可用于耐多药结核病、2 型糖尿病、阿尔茨海默病和帕金森病的研究。

生物实验数据

生物活性 Capreomycin sulfate is a macrocyclic peptide antibiotic that inhibits phenylalanine synthesis in mycobacterial ribosomal translation, possesses anti-amyloidogenic and fibrinolysis-promoting activities, reduces amyloid-induced cytotoxicity by inhibiting amyloid fibril formation, and can be used in research on multidrug-resistant tuberculosis, type 2 diabetes, Alzheimer's disease, and Parkinson's disease.
IC50 & Target

Aminoglycoside

 

体外研究
(In Vitro)

Capreomycin sulfate (10-200 μM;80 h) 以浓度依赖的方式抑制人红细胞中胰岛素原纤维的形成 (IC50=69.98 μM),并有延迟纤颤过程的作用。
Capreomycin sulfate (75-100 μM; 60 min) 对淀粉样蛋白原纤维诱导红细胞损伤并引起溶血呈现剂量依赖性的保护作用。
Capreomycin sulfate (100 μM; 0-48 h) 以时间依赖性的方式有效地破坏红细胞中原纤维。

Cell Viability Assay

Cell Line: human erythrocyte
Concentration: 75 and 100 µM
Incubation Time: 30 min
Result: The hemolysis rates were 23.8% and 13.0% at 75µM and 100µM, respectively.
体内研究
(In Vivo)

Capreomycin sulfate (1.4-14.5 mg/kg, 雾化吸入; 20 mg/kg, 肌肉注射, 4周) 降低受感染豚鼠的肺湿重并减少肺中的细菌负担。

豚鼠体内的药代动力学实验

Route Dose (mg/kg) AUC0-t (ng h/mL) CL_F (mL/h kg) K (h-1) t1/2 (h) MRT (h) Cmax (ng/mL) Tmax (h) MAT (h) F0-t
i.v. 20 49.29 0.42 0.92 0.75 0.88 53.36 0.08 / 1.00
i.m. 20 58.2 0.35 0.68 1.09 1.44 32.33 0.36 0.44 1.20
Insufflation 14.5 16.95 0.54 0.48 1.53 1.80 6.70 0.31 0.80 0.54
Insufflation 7.2 8.2 0.52 0.45 1.68 1.72 3.34 0.38 0.72 0.59
Insufflation 1.4 1.15 0.67 0.71 1.22 1.01 0.92 0.5 / 0.41

Animal Model: Male guinea pigs [836 ± 162.3 g; infected via the respiratory route with nebulized suspensions 2 × 105 CFU/mL of Mycobacterium tuberculosis (strain H37Rv)]
Dosage: 1.4, 7.2, and 14.5 mg/kg for Insufflation; 20 mg/kg for Intramuscular injection
Administration: Insufflation or Intramuscular injection; 4 weeks
Result: Decreased the wet lung weight at 14.5 mg/kg, and smaller than receiving 1.4 mg/kg group and controls.
Lowered bacterial burden in the lungs (3.52 CFU/mL) at 14.5 mg/kg than controls (4.58 CFU/mL) and at 1.4 and 7.2 mg/kg (4.02 and 4.01 CFU/mL, respectively)
性状 固体
颜色 White to off-white

化学信息

CAS No. 1405-37-4
别名 硫酸卷曲霉素

储存&溶解度

溶解度信息
H2O: 100.00 mg/mL (132.84 mM), Sonication is recommended.
DMSO: Insoluble
储存方式

-20°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础