HPK1-IN-68(Compound 39)是一种 IC50 为 2.8 nM 的 HPK1 抑制剂,可阻断 HPK1 信号传导、抑制 HPK1 介导的 SLP76 磷酸化、促进 IL-2 细胞因子的产生、拮抗 PGE2 介导的免疫抑制作用、增强 CD3+/CD8+ T 细胞向肿瘤组织的浸润,并在小鼠结肠癌模型中具有 T 细胞依赖性的抗肿瘤功效,与 anti-PD-1 联合使用时表现出显著的协同抗肿瘤作用,可用于结肠癌的相关研究。
产品编号: MS-U47482 CAS No.: 3078477-58-1 分子式: C23H28FN7O2 分子量: 453.51
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

HPK1-IN-68(Compound 39)是一种 IC50 为 2.8 nM 的 HPK1 抑制剂,可阻断 HPK1 信号传导、抑制 HPK1 介导的 SLP76 磷酸化、促进 IL-2 细胞因子的产生、拮抗 PGE2 介导的免疫抑制作用、增强 CD3+/CD8+ T 细胞向肿瘤组织的浸润,并在小鼠结肠癌模型中具有 T 细胞依赖性的抗肿瘤功效,与 anti-PD-1 联合使用时表现出显著的协同抗肿瘤作用,可用于结肠癌的相关研究。

生物实验数据

生物活性 HPK1-IN-68 (Compound 39) is a HPK1 inhibitor with an IC50 of 2.8 nM that blocks HPK1 signaling, inhibits HPK1-mediated SLP76 phosphorylation, promotes IL-2 cytokine production, antagonizes PGE2-mediated immunosuppression, enhances CD3+/CD8+ T cell infiltration into tumor tissues, exhibits T cell-dependent antitumor efficacy in a mouse colon cancer model, shows significant synergistic antitumor effects when combined with anti-PD-1, and can be used for related research on colon cancer.
IC50 & Target HPK1:2.8 nM
体外研究
(In Vitro)

HPK1-IN-68 (预平衡 10 min, 1 h) 可强效抑制重组 HPK1 激酶活性,其 IC50 为 2.8 nM。
HPK1-IN-68 (0-1000 nM; 2 h) 可在 Jurkat T 细胞中抑制 HPK1 介导的 SLP76 磷酸化,其 IC50 为 30.4 nM。
HPK1-IN-68 (0.01 nM-1 μM; 48 h) 可在亚微摩尔浓度下增强经 CD3/CD28 刺激的 Jurkat T 细胞中 IL-2 细胞因子的产生。
HPK1-IN-68 在肝微粒体中具有中等代谢稳定性,半衰期为 26.1 min。

ELISA Assay

Cell Line: Jurkat T cells
Concentration: 0.01 nM-1 μM
Incubation Time: 48 h
Result: Increased IL-2 production relative to vehicle control at concentrations from 0.01 nM to 100 nM.
Reduced IL-2 production at the highest tested concentration (1 μM).
体内研究
(In Vivo)

HPK1-IN-68 (10 mg/kg;腹腔注射;每日 2 次;17 天) 在小鼠 CT26 结肠癌模型中,单试剂处理和抗 PD-1 抗体联合使用都可发挥抗肿瘤作用。

Animal Model: Balb/c (female, 4-5 weeks old, 18-22 g, subcutaneously injected with 5×105 CT26 tumor cells)
Dosage: 10 mg/kg (monotherapy; combination with anti-PD-1)
Administration: i.p.; bid; 17 days (monotherapy); i.p.; bid (combination with anti-PD-1, anti-PD-1 administered on days 0, 3, 7, and 10 at 5 mg/kg i.p.)
Result: Achieved 48% tumor growth inhibition (TGI) as monotherapy.
Achieved 59% TGI with combination index (CI) < 1 and synergy score (SS) > 0 when combined with anti-PD-1 antibody, confirming synergistic activity.
Was well-tolerated, with no significant body weight loss observed.
Increased infiltration of CD3+/CD8+ T cells into tumor tissues, and this effect was amplified when combined with anti-PD-1 antibody.

化学信息

分子量 453.51
分子式 C23H28FN7O2
CAS No. 3078477-58-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础