AHR agonist 10 是一种强效的 AHR 激动剂(EC50 = 2.01 nM),可提高包括 CYP1A1 和 CYP1B1 在内的关键 AHR 下游通路靶基因的转录水平,下调 CD36 和 IL-18 的表达水平,对正常细胞显示出较低的细胞毒性(> 40 μM),并抑制 CCL5、CCL20、IL-6、IL-8、S100A9、TLR4、TNF-α 和 TNFR1 的表达,表明其通过 AHR 依赖性信号通路有效调节炎症反应,可用于银屑病研究。
产品编号: MS-U46724 CAS No.: 1191937-43-5 分子式: C18H20O3 分子量: 284.35
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

AHR agonist 10 是一种强效的 AHR 激动剂(EC50 = 2.01 nM),可提高包括 CYP1A1 和 CYP1B1 在内的关键 AHR 下游通路靶基因的转录水平,下调 CD36 和 IL-18 的表达水平,对正常细胞显示出较低的细胞毒性(> 40 μM),并抑制 CCL5、CCL20、IL-6、IL-8、S100A9、TLR4、TNF-α 和 TNFR1 的表达,表明其通过 AHR 依赖性信号通路有效调节炎症反应,可用于银屑病研究。

生物实验数据

生物活性 AHR agonist 10 is a potent AHR agonist (EC50 = 2.01 nM) that increases the transcriptional levels of key AHR downstream pathway target genes, including CYP1A1 and CYP1B1, downregulates the expression levels of CD36 and IL-18, exhibits low cytotoxicity against normal cells (> 40 μM), and inhibits the expression of CCL5, CCL20, IL-6, IL-8, S100A9, TLR4, TNF-α, and TNFR1, indicating that AHR agonist 10 effectively modulates inflammatory responses through AHR-dependent signaling pathways and can be used for psoriasis research.
IC50 & Target

IL-6

 

IL-8

 

体外研究
(In Vitro)

AHR agonist 10 (Compound B19) (10 μM, 20 μM, 24 h) 能有效增强 AHR 敲低的 HaCaT 细胞中 CYP1A1 和CYP1B1 的表达水平。
AHR agonist 10 (5 μM) 可以在 Lipopolysaccharides (MS-X54539) (LPS) 诱导的 HaCaT 细胞中抑制 CYP1A1、CYP1B1、CCL5、CCL20、IL-6、IL-8、S100A9、TLR4、TNF-α 和 TNFR1 在 mRNA 水平上的表达。

RT-PCR

Cell Line: AHR knockdown HaCaT cell
Concentration: 10 μM, 20 μM
Incubation Time: 24 h
Result: Enhanced the expression levels of CYP1A1 and CYP1B1 on the HaCaT cells.
体内研究
(In Vivo)

AHR agonist 10 (1%,局部应用,每日一次,持续 7 天) 抑制了 Imiquimod (MS-W79117) 诱导的小鼠背部银屑病症状的发生和进展,表现为红斑和鳞屑的减少。

Animal Model: Male Babl/C mice (7-8 weeks old) were administered topically with Imiquimod (62.5 mg/mouse) on the hair-free back.
Dosage: 1%
Administration: Topical application, once daily, 7 days
Result: Exhibited the ability to decrease the thickness of the stratum corneum and stratum spinosum of the skin, ameliorating epidermal hyperplasia.
Downregulated the expression of Ki67 and PCNA.
Mitigated psoriasis-associated epidermal hyperplasia by curbing excessive epidermal cell proliferation.
Enhanced the expression levels of ZO-1 and occludin.
Downregulated the expression levels of IL-17, IL-23, and IL-17F, effectively halting the progression of psoriasis by disrupting the responsible cytokine cascade and subsequent inflammatory response.
Effectively activated the AHR pathway, leading to enhanced expression levels of CYP1A1, CYP1B1, and HSP90.

化学信息

分子量 284.35
分子式 C18H20O3
CAS No. 1191937-43-5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础