CB2 receptor agonist 2

CB2 receptor agonist 2 是一种对 CB2 受体具有高效力和选择性的激动剂,其对 CB2 的 Ki 为 8.5 nM,并对 CB2 表现出高亲和力和选择性。
产品编号: MS-U37972 纯度: 99.0% CAS No.: 1314230-75-5 分子式: C30H36N2O4 分子量: 488.62
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5mg
询价
询价

产品描述

CB2 receptor agonist 2 是一种对 CB2 受体具有高效力和选择性的激动剂,其对 CB2 的 Ki 为 8.5 nM,并对 CB2 表现出高亲和力和选择性。

生物实验数据

生物活性 CB2 receptor agonist 2 is a potent and selective agonist of the CB2 receptor with a Ki of 8.5 nM for CB2, exhibiting high affinity and selectivity for CB2.
IC50 & Target CB2:8.5 nM (Ki)
体外研究
(In Vitro)

CB2 receptor agonist 2 (compound 4g) (1 μM; 72 hours) has very low or no cytotoxicity to Hep-G2 cells.

Cell Proliferation Assay

Cell Line: Hep-G2 (Human hepatoblastoma) cells
Concentration: 1  μM
Incubation Time: 72 hours
Result: Exhibited very low or no cytotoxicity to Hep-G2 cells.
体内研究
(In Vivo)

CB2 receptor agonist 2 (compound 4g) (1 and 3 mg/kg; 1 hour) is very potent (with maximal effect being reached already at the 1 mg/kg dose) and has antihyperalgesic effects, efficacious also on the first phase of the nocifensive response and strongly reduced by AM630 (CB2-selective antagonist/inverse agonist).

Animal Model: Formalin injection induces a biphasic stereotypical nocifensive behavior in mice
Dosage: Formalin (1.25% in saline, 30 μL), 1 and 3 mg/kg CB2 receptor agonist 2, 1 mg/kg AM630, monitor every 5 minutes for 1 hour
Administration: Injection in the dorsal surface of one side of the hindpaw (Formalin), i.p. (CB2 receptor agonist, AM630)
Result: Elicited antihyperalgesic effects and potent (with maximal effect being reached already at the 1 mg/kg dose) and efficacious, strongly reduced by AM630.
性状 固体
颜色 White to light yellow

化学信息

分子量 488.62
分子式 C30H36N2O4
CAS No. 1314230-75-5

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

Ethanol 中的溶解度 : 30 mg/mL (61.40 mM; 超声加热助溶)

可选溶剂浓度1 mg5 mg10 mg25 mg
Ethanol1 mM2.0466 mL10.2329 mL20.4658 mL51.1645 mL
5 mM0.4093 mL2.0466 mL4.0932 mL10.2329 mL
10 mM0.2047 mL1.0233 mL2.0466 mL5.1165 mL
15 mM0.1364 mL0.6822 mL1.3644 mL3.4110 mL
20 mM0.1023 mL0.5116 mL1.0233 mL2.5582 mL
25 mM0.0819 mL0.4093 mL0.8186 mL2.0466 mL
30 mM0.0682 mL0.3411 mL0.6822 mL1.7055 mL
40 mM0.0512 mL0.2558 mL0.5116 mL1.2791 mL
50 mM0.0409 mL0.2047 mL0.4093 mL1.0233 mL
60 mM0.0341 mL0.1705 mL0.3411 mL0.8527 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础