Boric acid Solution, 2%

Synonyms: 硼酸溶液, 2%; Boracic acid Solution, 2%
Boric acid Solution, 2% (Boracic acid Solution, 2%) 是一种具有口服活性的生化试剂,用作绝缘产品的阻燃剂,并可用于洗衣粉、清洁剂和肥料,同时具有毒性,可诱导淋巴细胞发生染色体结构畸变,导致肺/肝脏损伤,并诱导睾丸萎缩和间质细胞增生。
硼酸溶液, 2%
产品编号: MS-U03383
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Boric acid Solution, 2% (Boracic acid Solution, 2%) 是一种具有口服活性的生化试剂,用作绝缘产品的阻燃剂,并可用于洗衣粉、清洁剂和肥料,同时具有毒性,可诱导淋巴细胞发生染色体结构畸变,导致肺/肝脏损伤,并诱导睾丸萎缩和间质细胞增生。

生物实验数据

生物活性 Boric acid Solution, 2% (Boracic acid Solution, 2%) is an orally active biochemical reagent used as a flame retardant for insulation products and applicable in laundry detergents, cleaning agents, and fertilizers, and it is toxic, capable of inducing structural chromosomal aberrations in lymphocytes, causing lung/liver damage, and inducing testicular atrophy and interstitial cell hyperplasia.
体外研究
(In Vitro)

Boric acid Solution (最高 1820 μg/plate) 不会在有或无代谢活化的条件下诱导鼠伤寒沙门氏菌 (Salmonella typhimurium) 菌株 TA100、TA1535、TA98、TA1537 发生回复突变。
Boric acid Solution (最高 5000 μg/mL) 在有无代谢活化的条件下均不会诱导 L5178Y 小鼠淋巴瘤细胞发生突变。
Boric acid Solution (最高 1000 μg/mL) 可诱导淋巴细胞发生染色体结构畸变,但不会引发染色体数目畸变或姐妹染色单体交换。

体内研究
(In Vivo)

Boric acid Solution (90-270 mg/m3;吸入;妊娠期) 会对妊娠大鼠造成毒性,导致肺/肝脏损伤。
Boric acid Solution (5-20 mg B/kg bw/天;灌胃;妊娠第 6-21 天、出生后第 1-28 天) 可导致幼崽血浆硼水平呈剂量依赖性升高;在最高剂量下观察到幼崽体重降低和短暂性脐疝,因此针对幼崽体重降低的未观察到有害作用水平 (NOAEL) 为 10 mg B/kg bw。
Boric acid Solution (2500-5000 ppm;口服;经饲料口服;2 年) 无致癌性,但会导致高剂量组雄性小鼠出现睾丸萎缩和间质细胞增生。

Animal Model: unspecified (pregnant females)
Dosage: 90 mg/m3 (cellulose insulation with 20% Boric acid Solution); 270 mg/m3 (cellulose insulation with 20% Boric acid Solution)
Administration: inhalation; during gestation
Result: Increased incidence of gross lesions in lung or liver and pale lungs in pregnant rats.
Caused a 7% reduction in foetal body weight.
No embryo/foetal developmental endpoints other than body weight were affected.

化学信息

别名 硼酸溶液, 2%; Boracic acid Solution, 2%

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础